diff --git a/Hydroponicsmeasure.ino b/Hydroponicsmeasure.ino
index 3a07e58..41a961c 100644
--- a/Hydroponicsmeasure.ino
+++ b/Hydroponicsmeasure.ino
@@ -83,42 +83,6 @@ void loop(void)
 
   }
 
-
-  digitalWrite(trigpin, LOW);  // Added this line
-
-  delayMicroseconds(4); // Added this line
-
-  digitalWrite(trigpin, HIGH);
-
-  delayMicroseconds(20); // Added this line
-
-  digitalWrite(trigpin, LOW);
-
-  duration = pulseIn(echopin, HIGH);
-
-  distance = (duration/2) / 29.1;
-
-  Serial.print(millis());
-  Serial.print(';');
-  Serial.print(distance);
-
- // if (distance >= 200 || distance <= 0){
-
-   // Serial.println("Out of range");
-
-  //}
-
-  //else {
-
-    //Serial.print(distance);
-
-    //Serial.println(" cm");
-
- // }
-
-  //delay(500);
- 
-  
   
   byte i;
   byte present = 0;
@@ -218,8 +182,48 @@ Ftemp =(Temp * 0.0625);
  
  //delay(1000);
 
+
+
+  digitalWrite(trigpin, LOW);  // Added this line
+
+  delayMicroseconds(4); // Added this line
+
+  digitalWrite(trigpin, HIGH);
+
+  delayMicroseconds(20); // Added this line
+
+  digitalWrite(trigpin, LOW);
+
+  duration = pulseIn(echopin, HIGH);
+
+  distance = (duration/2) / 29.1;
+
+  Serial.print(millis());
+  Serial.print(';');
+  Serial.print(distance);
+
+ // if (distance >= 200 || distance <= 0){
+
+   // Serial.println("Out of range");
+
+  //}
+
+  //else {
+
+    //Serial.print(distance);
+
+    //Serial.println(" cm");
+
+ // }
+
+  //delay(500);
+
+
 //write out all the results in the following format
 // uptime (ms),water level (cm), pH, pH Voltage, water temp (degrees C), air temp (degrees C)
+
+
+
 Serial.print(';');
 Serial.print(pHValue,2);
 Serial.print(';');