From 8f8aaa46606e80e1103cef1999364ccfd09e0a53 Mon Sep 17 00:00:00 2001
From: James Devine <devine.jd@gmail.com>
Date: Wed, 17 Jan 2018 19:23:10 +0100
Subject: [PATCH]

---
 ParticleElectronRFIDReadandPublish.ino | 92 ++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 ParticleElectronRFIDReadandPublish.ino

diff --git a/ParticleElectronRFIDReadandPublish.ino b/ParticleElectronRFIDReadandPublish.ino
new file mode 100644
index 0000000..c41fe4b
--- /dev/null
+++ b/ParticleElectronRFIDReadandPublish.ino
@@ -0,0 +1,92 @@
+/*****************************************************************************
+*  ParticleSoftSerial library (PSS_SimpleTest.ino)
+*  Copyright (c) 2016 Free Software Foundation.  All right reserved.
+*  Written by Andreas Rothenw�nder (aka ScruffR)
+*
+*  This sample shows sends data from Serial1 to ParticleSoftSerial(D2/D3)
+*
+*    Prerequisites:
+*      import SparkIntervalTimer library (by Paul Kourany)
+*      wire   Serial1 TX to D2
+*             Serial1 RX to D3 (for sending ParticleSoftSerial to Serial1)
+*
+*    Due to relatively low interrupt priorities used, baudrates greater 31250
+*    may be prone to data corruption, depending on over all system load.
+*
+*  This library is free software; you can redistribute it and/or
+*  modify it under the terms of the GNU Lesser General Public
+*  License as published by the Free Software Foundation; either
+*  version 2.1 of the License, or (at your option) any later version.
+*
+*  This library is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+*  Lesser General Public License for more details.
+*
+*  You should have received a copy of the GNU Lesser General Public
+*  License along with this library; if not, write to the Free Software
+*  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*****************************************************************************/
+#include <ParticleSoftSerial.h>
+#include "Particle.h"
+
+
+#define RECEIVER SoftSer
+#define PROTOCOL SERIAL_8N1
+
+const uint32_t baud = 9600;
+
+//#if (SYSTEM_VERSION >= 0x00060000)
+//  SerialLogHandler logHandler;
+//#endif
+
+#define PSS_RX D3 // RX must be interrupt enabled (on Photon/Electron D0/A5 are not)
+#define PSS_TX C5 //this pin isn't something we use, I couldn't find a null pin
+ParticleSoftSerial SoftSer(PSS_RX, PSS_TX);
+char CARDcurrent[4];
+
+void setup()
+{
+  Serial.begin();
+  Serial.printlnf("ready for data");
+  RECEIVER.begin(baud, PROTOCOL); // but SoftSerial can ;-)
+}
+
+void loop()
+{
+
+int counter = 0;
+unsigned long cardread = 0;
+String cardpublish;
+
+while (RECEIVER.available())
+  {
+      for (int cardident = 0; cardident < 5; cardident++) {
+      counter = (RECEIVER.read());
+      if (cardident > 0) Serial.print(int(counter), HEX);
+      CARDcurrent[cardident-1] = counter;
+      Serial.print(" ");
+      }
+      Serial.println("");
+      cardread=int(CARDcurrent[0]);
+      cardread=cardread << 8;
+      cardread=cardread+ int(CARDcurrent[1]);
+      cardread=cardread << 8;
+      cardread=cardread+ int(CARDcurrent[2]);
+      cardread=cardread << 8;
+      cardread=cardread+ int(CARDcurrent[3]);
+      Serial.println(cardread, HEX);
+      bool success;
+      success = Particle.publish("RFIDident", String(cardread, HEX), 0, PUBLIC);
+      if (!success) {
+      Serial.println("failedtopublish");  // get here if event publish did not work
+      }
+
+  }
+    RECEIVER.flush();
+
+    if (Particle.connected()) {
+        Serial.println("Connected!");
+      }
+      delay(1000);
+}