cosmicdatajson

@@ -0,0 +1,176 @@
+/*
+  DigitalReadSerial
+ Reads a digital input on pin 2, prints the result to the serial monitor
+
+ This example code is in the public domain.
+ */
+
+// digital pin 2 has a pushbutton attached to it. Give it a name:
+//int pushButton = 2;
+
+int gpstime = random(100,1000);
+int latitude = random(0, 100);
+int longitude = random(0,100);
+int fixquality = random(-0,1);
+int numsats = random(10,16);
+int hozaccuracy= random(5,50);
+int altitude = random(1000,3000);
+int height = altitude + 100;
+int timesinceupdate = random(10,1000);
+int DGPS = random(1,2);
+int checksum =random(0,8);
+
+int exacttime = gpstime;
+int energy1 = random(10000,20000);
+int energy2 = random(10050,19950);
+int altitudereal = altitude + random(-100,100);
+int altaccuracy = random(1,100);
+
+int humidity = random (60,70);
+int humaccuracy = random (1,20);
+
+
+int xgrav = random(0,10);
+int ygrav = random(0,10);
+int zgrav = random(0,10);
+
+int mxgrav = random(0,10);
+int mygrav = random(0,10);
+int mzgrav = random(0,10);
+
+int tempval1 = random(10,35);
+int tempval2 = tempval1 + 1;
+
+int uptime = random(1,1000);
+
+int deviceid = random(1,10000);
+
+// the setup routine runs once when you press reset:
+void setup() {
+  // initialize serial communication at 9600 bits per second:
+  Serial.begin(115200);
+
+  }
+
+// the loop routine runs over and over again forever:
+void loop() {
+  // read the input pin:
+  //int buttonState = digitalRead(pushButton);
+  // print out the state of the button:
+  Serial.println("{");
+  Serial.println("    \"GPS data\": {");
+  Serial.print("      \"GPSTime\": ");
+  Serial.print(gpstime);
+  Serial.println(','); 
+  Serial.print("      \"Latitude\": ");
+  Serial.print(latitude);
+  Serial.println(','); 
+  Serial.print("      \"Longitude\": ");
+  Serial.print(longitude);
+  Serial.println(',');
+  Serial.print("      \"FixQuality\": ");
+  Serial.print(fixquality);
+  Serial.println(',');
+  Serial.print("      \"Numberofsats\": ");
+  Serial.print(numsats);
+  Serial.println(',');
+  Serial.print("      \"HorizontalAccuracy\": ");
+  Serial.print(hozaccuracy);
+  Serial.println(',');
+  Serial.print("      \"Altitude\": ");
+  Serial.print(altitude);
+  Serial.println(',');
+  Serial.print("      \"Height\": ");
+  Serial.print(height);
+  Serial.println(',');
+  Serial.print("      \"TimeSinceUpdate\": ");
+  Serial.print(timesinceupdate);
+  Serial.println(',');
+  Serial.print("      \"DGPS\": ");
+  Serial.print(DGPS);
+  Serial.println(',');
+  Serial.print("      \"Checksum\": ");
+  Serial.print(checksum);
+  Serial.println(); 
+  Serial.println("    },");
+  
+
+  Serial.print("    \"Timing\": ");
+  Serial.print(exacttime);
+  Serial.println(','); 
+  
+  Serial.println("    \"Energy\": {");
+  Serial.print("      \"Energy1\": ");
+  Serial.print(energy1);
+  Serial.println(',');
+  Serial.print("      \"Energy2\": ");
+  Serial.print(energy2);
+  Serial.println();
+  Serial.println("    },");
+
+  Serial.print("    \"Altitude\": "); 
+  Serial.print(altitudereal);
+  Serial.println(",");
+
+  Serial.print("    \"Humidity\": "); 
+  Serial.print(humidity);
+  Serial.println(",");
+
+  Serial.println("    \"GravitationalOrientation\": {"); 
+  Serial.print("     \"Xaxis\": ");
+  Serial.print(xgrav);
+  Serial.println(",");
+  Serial.print("     \"Yaxis\": ");
+  Serial.print(ygrav);
+  Serial.println(",");
+  Serial.print("     \"Zaxis\": ");
+  Serial.print(zgrav);
+  Serial.println();
+  Serial.println("    },");  
+
+  Serial.println("    \"MagneticOrientation\": {"); 
+  Serial.print("     \"Xaxis\": ");
+  Serial.print(mxgrav);
+  Serial.println(",");
+  Serial.print("     \"Yaxis\": ");
+  Serial.print(mygrav);
+  Serial.println(",");
+  Serial.print("     \"Zaxis\": ");
+  Serial.print(mzgrav);
+  Serial.println();
+  Serial.println("    },");
+
+  Serial.println("    \"Temperature\": {"); 
+  Serial.print("     \"Temperature1\": ");
+  Serial.print(tempval1);
+  Serial.println(",");
+  Serial.print("     \"Temperature2\": ");
+  Serial.print(tempval2);
+  Serial.println();
+  Serial.println("    },");
+
+
+  Serial.print("    \"DeviceUptime\": "); 
+  Serial.print(uptime);
+  Serial.println(",");
+  
+  Serial.print("    \"DeviceID\": "); 
+  Serial.print(deviceid);
+  Serial.println();
+
+  Serial.println("}");
+
+  
+  //increment and modify things
+  gpstime++;
+  exacttime++;
+  energy1= energy1 + random(-100,100);
+  energy2= energy2 + random(-100,100);
+  altitudereal = altitudereal + random(-10,10);
+  humidity=random(60,70);
+  uptime++;
+  
+  delay(1);        // delay in between reads for stability
+}
+
+