pingu_98/CosmicPiArduino
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
CosmicPiArduino/Adafruit_LSM303_U.h
James Devine 385d315c36 Library inclusion 
All Adafruit libraries included within a single directory for simplified
deployment and testing
2015-12-08 12:00:46 +01:00

199 lines
8.2 KiB
C++
Raw Blame History

/***************************************************************************
This is a library for the LSM303 Accelerometer and magnentometer/compass
Designed specifically to work with the Adafruit LSM303DLHC Breakout
These displays use I2C to communicate, 2 pins are required to interface.
Adafruit invests time and resources providing this open source code,
please support Adafruit andopen-source hardware by purchasing products
from Adafruit!
Written by Kevin Townsend for Adafruit Industries.
BSD license, all text above must be included in any redistribution
***************************************************************************/
#ifndef __LSM303_H__
#define __LSM303_H__
#if (ARDUINO >= 100)
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include "Adafruit_Sensor.h"
#ifdef __AVR_ATtiny85__
#include "TinyWireM.h"
#define Wire TinyWireM
#else
#include <Wire.h>
#endif
/*=========================================================================
I2C ADDRESS/BITS
-----------------------------------------------------------------------*/
#define LSM303_ADDRESS_ACCEL (0x32 >> 1) // 0011001x
#define LSM303_ADDRESS_MAG (0x3C >> 1) // 0011110x
/*=========================================================================*/
/*=========================================================================
REGISTERS
-----------------------------------------------------------------------*/
typedef enum
{ // DEFAULT TYPE
LSM303_REGISTER_ACCEL_CTRL_REG1_A = 0x20, // 00000111 rw
LSM303_REGISTER_ACCEL_CTRL_REG2_A = 0x21, // 00000000 rw
LSM303_REGISTER_ACCEL_CTRL_REG3_A = 0x22, // 00000000 rw
LSM303_REGISTER_ACCEL_CTRL_REG4_A = 0x23, // 00000000 rw
LSM303_REGISTER_ACCEL_CTRL_REG5_A = 0x24, // 00000000 rw
LSM303_REGISTER_ACCEL_CTRL_REG6_A = 0x25, // 00000000 rw
LSM303_REGISTER_ACCEL_REFERENCE_A = 0x26, // 00000000 r
LSM303_REGISTER_ACCEL_STATUS_REG_A = 0x27, // 00000000 r
LSM303_REGISTER_ACCEL_OUT_X_L_A = 0x28,
LSM303_REGISTER_ACCEL_OUT_X_H_A = 0x29,
LSM303_REGISTER_ACCEL_OUT_Y_L_A = 0x2A,
LSM303_REGISTER_ACCEL_OUT_Y_H_A = 0x2B,
LSM303_REGISTER_ACCEL_OUT_Z_L_A = 0x2C,
LSM303_REGISTER_ACCEL_OUT_Z_H_A = 0x2D,
LSM303_REGISTER_ACCEL_FIFO_CTRL_REG_A = 0x2E,
LSM303_REGISTER_ACCEL_FIFO_SRC_REG_A = 0x2F,
LSM303_REGISTER_ACCEL_INT1_CFG_A = 0x30,
LSM303_REGISTER_ACCEL_INT1_SOURCE_A = 0x31,
LSM303_REGISTER_ACCEL_INT1_THS_A = 0x32,
LSM303_REGISTER_ACCEL_INT1_DURATION_A = 0x33,
LSM303_REGISTER_ACCEL_INT2_CFG_A = 0x34,
LSM303_REGISTER_ACCEL_INT2_SOURCE_A = 0x35,
LSM303_REGISTER_ACCEL_INT2_THS_A = 0x36,
LSM303_REGISTER_ACCEL_INT2_DURATION_A = 0x37,
LSM303_REGISTER_ACCEL_CLICK_CFG_A = 0x38,
LSM303_REGISTER_ACCEL_CLICK_SRC_A = 0x39,
LSM303_REGISTER_ACCEL_CLICK_THS_A = 0x3A,
LSM303_REGISTER_ACCEL_TIME_LIMIT_A = 0x3B,
LSM303_REGISTER_ACCEL_TIME_LATENCY_A = 0x3C,
LSM303_REGISTER_ACCEL_TIME_WINDOW_A = 0x3D
} lsm303AccelRegisters_t;
typedef enum
{
LSM303_REGISTER_MAG_CRA_REG_M = 0x00,
LSM303_REGISTER_MAG_CRB_REG_M = 0x01,
LSM303_REGISTER_MAG_MR_REG_M = 0x02,
LSM303_REGISTER_MAG_OUT_X_H_M = 0x03,
LSM303_REGISTER_MAG_OUT_X_L_M = 0x04,
LSM303_REGISTER_MAG_OUT_Z_H_M = 0x05,
LSM303_REGISTER_MAG_OUT_Z_L_M = 0x06,
LSM303_REGISTER_MAG_OUT_Y_H_M = 0x07,
LSM303_REGISTER_MAG_OUT_Y_L_M = 0x08,
LSM303_REGISTER_MAG_SR_REG_Mg = 0x09,
LSM303_REGISTER_MAG_IRA_REG_M = 0x0A,
LSM303_REGISTER_MAG_IRB_REG_M = 0x0B,
LSM303_REGISTER_MAG_IRC_REG_M = 0x0C,
LSM303_REGISTER_MAG_TEMP_OUT_H_M = 0x31,
LSM303_REGISTER_MAG_TEMP_OUT_L_M = 0x32
} lsm303MagRegisters_t;
/*=========================================================================*/
/*=========================================================================
MAGNETOMETER GAIN SETTINGS
-----------------------------------------------------------------------*/
typedef enum
{
LSM303_MAGGAIN_1_3 = 0x20, // +/- 1.3
LSM303_MAGGAIN_1_9 = 0x40, // +/- 1.9
LSM303_MAGGAIN_2_5 = 0x60, // +/- 2.5
LSM303_MAGGAIN_4_0 = 0x80, // +/- 4.0
LSM303_MAGGAIN_4_7 = 0xA0, // +/- 4.7
LSM303_MAGGAIN_5_6 = 0xC0, // +/- 5.6
LSM303_MAGGAIN_8_1 = 0xE0 // +/- 8.1
} lsm303MagGain;
/*=========================================================================*/
/*=========================================================================
MAGNETOMETER UPDATE RATE SETTINGS
-----------------------------------------------------------------------*/
typedef enum
{
LSM303_MAGRATE_0_7 = 0x00, // 0.75 Hz
LSM303_MAGRATE_1_5 = 0x01, // 1.5 Hz
LSM303_MAGRATE_3_0 = 0x62, // 3.0 Hz
LSM303_MAGRATE_7_5 = 0x03, // 7.5 Hz
LSM303_MAGRATE_15 = 0x04, // 15 Hz
LSM303_MAGRATE_30 = 0x05, // 30 Hz
LSM303_MAGRATE_75 = 0x06, // 75 Hz
LSM303_MAGRATE_220 = 0x07 // 200 Hz
} lsm303MagRate;
/*=========================================================================*/
/*=========================================================================
INTERNAL MAGNETOMETER DATA TYPE
-----------------------------------------------------------------------*/
typedef struct lsm303MagData_s
{
float x;
float y;
float z;
} lsm303MagData;
/*=========================================================================*/
/*=========================================================================
INTERNAL ACCELERATION DATA TYPE
-----------------------------------------------------------------------*/
typedef struct lsm303AccelData_s
{
float x;
float y;
float z;
} lsm303AccelData;
/*=========================================================================*/
/*=========================================================================
CHIP ID
-----------------------------------------------------------------------*/
#define LSM303_ID (0b11010100)
/*=========================================================================*/
/* Unified sensor driver for the accelerometer */
class Adafruit_LSM303_Accel_Unified : public Adafruit_Sensor
{
public:
Adafruit_LSM303_Accel_Unified(int32_t sensorID = -1);
bool begin(void);
bool getEvent(sensors_event_t*);
void getSensor(sensor_t*);
private:
lsm303AccelData _accelData; // Last read accelerometer data will be available here
int32_t _sensorID;
void write8(byte address, byte reg, byte value);
byte read8(byte address, byte reg);
void read(void);
};
/* Unified sensor driver for the magnetometer */
class Adafruit_LSM303_Mag_Unified : public Adafruit_Sensor
{
public:
Adafruit_LSM303_Mag_Unified(int32_t sensorID = -1);
bool begin(void);
void enableAutoRange(bool enable);
void setMagGain(lsm303MagGain gain);
void setMagRate(lsm303MagRate rate);
bool getEvent(sensors_event_t*);
void getSensor(sensor_t*);
private:
lsm303MagGain _magGain;
lsm303MagData _magData; // Last read magnetometer data will be available here
int32_t _sensorID;
bool _autoRangeEnabled;
void write8(byte address, byte reg, byte value);
byte read8(byte address, byte reg);
void read(void);
};
#endif
Reference in a new issue View git blame Copy permalink