diff --git a/examples/KeyboardFeatureReport/KeyboardFeatureReport.ino b/examples/KeyboardFeatureReport/KeyboardFeatureReport.ino
new file mode 100644
index 0000000..f7148ea
--- /dev/null
+++ b/examples/KeyboardFeatureReport/KeyboardFeatureReport.ino
@@ -0,0 +1,80 @@
+/*
+  Copyright (c) 2014-2015 NicoHood
+  See the readme for credit to other people.
+
+  KeyboardFeatureReport example
+
+  Shows how to use BootKeyboard with a modified Hyperion Lightpack device.
+  Might only work under linux.
+
+  See HID Project documentation for more information.
+  https://github.com/NicoHood/HID/wiki/RawHID-API
+  https://github.com/NicoHood/HID/wiki/Keyboard-API#boot-keyboard
+*/
+
+#include "HID-Project.h"
+
+const int pinLed = LED_BUILTIN;
+
+
+// FastLED
+#include "FastLED.h"
+
+#define LED_PINS    MOSI, SCK // DATA_PIN, or DATA_PIN, CLOCK_PIN
+#define COLOR_ORDER RGB
+#define CHIPSET     WS2801 // WS2811, LPD8806, etc
+#define NUM_LEDS    25
+
+#define BRIGHTNESS  255  // Reduce power consumption
+#define LED_DITHER  255  // Try 0 to disable flickering
+#define CORRECTION  TypicalLEDStrip
+
+CRGB leds[NUM_LEDS]; // Define the array of leds
+
+void setup() {
+  // FastLED setup
+  FastLED.addLeds<CHIPSET, LED_PINS, COLOR_ORDER>(leds, NUM_LEDS).setCorrection(CORRECTION);
+  FastLED.setBrightness(BRIGHTNESS);
+  FastLED.setDither(LED_DITHER);
+
+  // Startup animation
+  fill_solid(leds, NUM_LEDS, CRGB::Red);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Green);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Blue);
+  FastLED.show();
+  delay(500);
+  FastLED.clear();
+  FastLED.show();
+
+  pinMode(pinLed, OUTPUT);
+
+  // Sends a clean report to the host. This is important on any Arduino type.
+  BootKeyboard.begin();
+
+  // Let the feature report data directly point at the led array
+  BootKeyboard.setFeatureReport(leds, sizeof(leds));
+  BootKeyboard.enableFeatureReport();
+}
+
+void loop() {
+  // Check if there is new feature request data from the keyboard
+  if (BootKeyboard.availableFeatureReport())
+  {
+    digitalWrite(pinLed, HIGH);
+
+    // Update leds, do not update in the loop, to avoid corrupted data.
+    // For example if you write (0, 0, 0) and the interrupt
+    // changes the data to (255, 255, 255) you might get (0, 255, 255).
+    // Using a duplicated led array in cli() context would also work.
+    FastLED.show();
+
+    // Release data to let the USB interrupt overwrite it again
+    BootKeyboard.enableFeatureReport();
+
+    digitalWrite(pinLed, LOW);
+  }
+}
diff --git a/src/SingleReport/BootKeyboard.h b/src/SingleReport/BootKeyboard.h
index 221272d..d5c9ff0 100644
--- a/src/SingleReport/BootKeyboard.h
+++ b/src/SingleReport/BootKeyboard.h
@@ -43,6 +43,9 @@ public:
         if(length > 0){
             featureReport = (uint8_t*)report;
             featureLength = length;
+            
+            // Disable feature report by default
+            disableFeatureReport();
         }
     }