Update Readme.md

Added screen brightness control keys

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "HID.wiki"]
+	path = HID.wiki
+	url = https://github.com/NicoHood/HID.wiki.git

HID.wiki

@@ -0,0 +1 @@
+Subproject commit a1a0b086985dec037d7e7d86c6b2d5816207f202

Readme.md

@@ -1,223 +1,29 @@
-Arduino HID Project 2.4
-=======================
+**Arduino Silly Keyboard** forked from  Arduino HID Project 2.4.4
+=========================
 
-![Header Picture](header.jpg)
+![Header Picture](virtualkeyb.jpg)
 
-This project went through a lot of phases and has now reached a new Arduino ~~USB-Core~~ Library
-with a lot of new functions like extended HID. It also supports HoodLoader1+2.
-The idea is to enable enhanced USB functions to almost all 'standard' Arduino boards.
+This is targetted at the Leonardo or compatible boards (32U4) and will be built around one of these:
+https://www.aliexpress.com/item/Beetle-Virtual-Keyboard-BadUSB-Pro-Micro-ATMEGA32U4-Module-Mini-Development-Expansion-Board-For-Arduino-Leonardo-R3/32847715254.html?spm=2114.search0104.3.1.7d542341ScymPz&ws_ab_test=searchweb0_0,searchweb201602_1_10152_10151_10065_10344_10068_10342_10343_10340_5722611_10341_10696_5722911_5722811_10084_5722711_10083_10618_10307_10134_5711211_10059_308_100031_10103_10624_10623_10622_10621_10620_5711311_5722511_10814_10815,searchweb201603_25,ppcSwitch_5&algo_expid=c50f562a-35a5-4cbe-9391-2b1586b8823e-0&algo_pvid=c50f562a-35a5-4cbe-9391-2b1586b8823e&priceBeautifyAB=0
 
-**Supported Arduinos (IDE 1.6.6 or higher!):**
-* Uno (with [HoodLoader2](https://github.com/NicoHood/HoodLoader2))
-* Mega (with [HoodLoader2](https://github.com/NicoHood/HoodLoader2))
-* Leonardo
-* (Pro)Micro
-* Any other 8u2/16u2/at90usb8/162/32u2/32u4 compatible board
-* No SAM/ARM support (Due, Zero etc)
+It's going to act like a keyboard (HID) and will write random words at random times with the purpose of being an entertaining toy for the office to play (innocent) jokes on colleagues.
 
-**Supported HID devices:**
-* Keyboard with Leds out (8 modifiers + 6 keys pressed at the same time, + 1 limited linux consumer key)
-* ~~Teensy Keyboard with different keyboard layouts (german, french and many more)~~ soon
-* NKRO Keyboard with Leds out (press up to 113 keys at the same time)
-* Mouse (5 buttons, move, wheel)
-* BootKeyboard/BootMouse BIOS protocol support
-* Absolute Mouse
-* Consumer/Media Keys (4 keys for music player, web browser and more)
-* System Key (for PC standby/shutdown)
-* Gamepad (32 buttons, 4 16bit axis, 2 8bit axis, 2 D-Pads)
-* RawHID
-* Each device is available as single or multi report device (except RawHID)
+If I get clever, then it will insert words at just the right time when someone is typing - for example when the space bar is pressed and it's the perfect perfect time to insert a new new word word. Replay replay retyping things that were already typed would also be great. But I have some learning to do first! 
 
-See the [wiki](https://github.com/NicoHood/HID/wiki/Features) for more information about features etc.
-
-Wiki
-====
-
-All documentation moved to the [wiki page](https://github.com/NicoHood/HID/wiki).
-
-An offline snapshot is available in [releases](https://github.com/NicoHood/HID/releases).
+The project will advance more when the hardware arrives (sometime in the next 5-6 weeks).
 
 
-Contact
-=======
-
-You can contact me on my wordpress blog in the contact section.
-
-www.nicohood.de
-
-
-Version History
-===============
-```
-2.4 Release (06.11.2015)
-* Added Arduino IDE 1.6.6 compatibility with Pluggable HID
-* Improved Pluggable HID (see Arduyuino changelog for my improvements)
-* Changed USB-Core into a simple library, only made possible with Pluggable HID
-* Removed HID presets in boards menu (like mouse + keyboard + consumer + system)
-* Added NKRO Keyboard
-* Added Led report for Keyboard
-* Added 1 Linux consumer key for keyboard
-* Added BootKeyboard/Mouse support (BIOS compatibility)
-* Added RawHID
-* Added a few key definitions
-* Renew whole Keyboard API and its definitions via enum
-* Uses .alinkage custom IDE option
-* Improved and updated examples
-* A lot of other minor and major fixes I missed to mention.
-
-2.3 Release (never released)
-* Updated Libraries
-* Updated Arduino Core
-* Added Minor Consumer definitions
-* Fixed platforms.txt
-* SERIAL_RX_BUFFER_SIZE reverted to 16 (TODO add -D to build option)
-
-2.2 Release (12.04.2015)
-* added experimental, not finished nor documented HID-Bridge between 16u2 and 328/2560
-* increased HW Serial1 RX buffer size from 16 to 32 (TX still 16)
-* added colour highlighting (through HID-Bridge library)
-* removed fixed size in report buffers
-* used HID_KeyboardReport_Data_t now in Keyboard API
-* Arduino as ISP fix for 328
-* Upload verification on USB hubs fix for HL2.0.4
-* No USB workaround for Leonardo integrated into variants
-* Changed USB Wakeup in System API
-* Consumer Key fix (issue #3)
-* Gamepad fix (issue #14)
-* Added Keycode example
-* Mouse press + release fix
-
-2.1 Release (28.01.2015)
-* Reworked the whole USB-Core from scratch
-* Uses less flash if HID or Serial is not used
-* Extended and compacter(flash) HID Report Descriptors
-* Fixed USB Device Descriptor
-* Added u2 compatibility with smaller USB_EP_SIZE (16u2 etc)
-* Added Serial Event for LineEncoding and LineState
-* Added Serial Function to get dtr state, line encoding etc
-* Added Keyboard Led Out report to get Led states (for numlock etc)
-* Made CDC-Core independent from USB-Core
-* Made HID-Core independent from USB-Core
-* Made HID-API independent from HID-Core
-* Removed not needed virtual functions in Keyboard
-* Made HID Reports and its IDs replaceable via pins_Arduino.h
-* Added Absolute Mouse
-* Removed uint8_t USBPutChar(uint8_t c); in HID.cpp
-* Made void Recv(volatile u8* data, u8 count) in USBCore.cpp static inline
-* HID-APIs sends a clean report on begin() and end() now.
-* Removed virtual functions in Keyboard API
-* Added Keycode functions in Keyboard API
-* Inlined a lot of the HID API functions to save flash
-* Added Gamepad
-* Added RawHID API (but RawHID itself isnt working still)
-* Added USB Wakeup support
-* Separated USB-Core in its own folder
-* Added HID Tables
-* USB-Serial now fully reprogrammable
-* Easy USB-Core selection via Tools->USB-Core
-* Added Arduino as ISP fix for 32u4 and 16u2
-* Moved documentation to the wiki
-* Added AVR libraries to the core with the better SoftSerial
-
-2.0 Release (29.11.2014)
-* Added HoodLoader2
-* Separated HoodLoader1&2 more
-* Added u2 series for USB-Core
-* Extended USB core and fixed minor things for the u2 series
-* Added Led Out report.
-* Added CDC Line state
-* Reworked the whole library structure again
-
-1.8 Beta Release (26.08.2014)
-* Changes in the Hoodloader1:
- * **Huge improvements**, see Hoodloader1 repository
- * Reworked the whole library, easy installation now
- * HID fixes for Media Keys/Ubuntu
- * Removed Joystick, added 4 Gamepads
-
-1.7.3 Beta Release (10.08.2014)
-* Changes in the Hoodloader1:
- * Fixed HID flush bug (1.6 - 1.7.2)
-
-1.7.2 Beta Release (10.08.2014)
-* Changes in the Hoodloader1:
- * Added Lite version for 8u2
- * Added Versions that show up as Uno/Mega (not recommended)
- * Makefile and structure changes
-
-1.7.1 Beta Release (10.08.2014)
-* Changes in the Hoodloader1:
- * Fixed HID deactivation bug
-
-1.7 Beta Release (10.08.2014)
-* Changes in the Hoodloader1:
- * Works as ISP now. See Hoodloader1 Repository for more information.
- * Exceeded 8kb limit. For flashing a 8u2 use v1.6 please!
-* Changed Readme text
-
-1.6 Beta Release (09.08.2014)
-* Bugfixes in the Hoodloader1:
- * Changed HID management (not blocking that much, faster)
- * added RawHID in/out (HID to Serial)
-* Added RawHID Class and example
-
-1.5 Beta Release (21.07.2014)
-* Moved Hoodloader1 source to a separate Github page
-* Bugfixes in the Hoodloader:
- * Firmware is still available here
- * Overall a lot of ram improvements, now with a big global union of ram
- * Removed USBtoUSART buffer (not needed, saved 128/500 bytes)
- * Removed Lite version because of better ram usage not needed
- * Separated different modes better to not cause any errors in default mode
- * Improved the deactivate option
- * Integrated NHP directly
- * Replaced LightweightRingbuffer with native Lufa Ringbuffer
- * Improved writing to CDC Host
- * Fixed a bug in checkNHPProtocol: & needs to be a ==
- * General structure changes
- * Improved stability
- * Fixed Arduino as ISP bug
-
-1.4.1 Beta Release (10.07.2014)
-* #define Bugfix in USBAPI.h
-
-1.4 Beta Release (10.07.2014)
-* Bugfixes in the Hoodloader1:
- * Added Lite Version with less ram usage
- * Changed PIDs, edited driver file
-* merged v1.0.x and v1.5.x together (both are compatible!)
-* added IDE v1.5.7 support
-* added Tutorials
-
-1.3 Beta Release (01.07.2014)
-* Bugfixes in the Hoodloader1:
- * Improved ram usage
-* **Important NHP fix inside the HID Class for Uno/Mega**
-
-1.2 Beta Release (22.06.2014)
-* Added 1.0.x/1.5.x support
-* Bugfixes in the Hoodloader1:
- * Sometimes HID Devices weren't updating
-   when using more than 1 Device (set forcewrite to true)
- * Fast updates crashed the bootloader
-  (too much ram usage, set CDC buffer from 128b to 100b each)
-* Minor file structure changes
-
-1.1 Beta Release (05.06.2014)
-* Added Leonardo/Micro support
-* Included NicoHoodProtocol
-* Minor fixes
-
-1.0 Beta Release (03.06.2014)
-```
+Forked at
+2.4.4 Release (27.01.2017)
+* Added releaseAll() to Mouse API
+* Fix flexible array errors
 
 
 Licence and Copyright
 =====================
-If you use this library for any cool project let me know!
-
+Here's the original License conditions from NicoHood (AWESOME WORK!). 
 ```
-Copyright (c) 2014-2015 NicoHood
+Copyright (c) 2014-2016 NicoHood
 See the readme for credit to other people.
 
 Permission is hereby granted, free of charge, to any person obtaining a copy

examples/Keyboard/NKROKeyboard/NKROKeyboard.ino

@@ -35,17 +35,17 @@ void loop() {
     // Do not press to many at once or some OS will have problems.
     // Note that the resulting pressed order might differ,
     // because all keys are pressed at the same time.
-    NKROKeyboard.addKeyToReport('0');
-    NKROKeyboard.addKeyToReport('1');
-    NKROKeyboard.addKeyToReport('2');
-    NKROKeyboard.addKeyToReport('3');
-    NKROKeyboard.addKeyToReport('4');
-    NKROKeyboard.addKeyToReport('5');
-    NKROKeyboard.addKeyToReport('6');
-    NKROKeyboard.addKeyToReport('7');
-    NKROKeyboard.addKeyToReport('8');
-    NKROKeyboard.addKeyToReport('9');
-    NKROKeyboard.send_now();
+    NKROKeyboard.add('0');
+    NKROKeyboard.add('1');
+    NKROKeyboard.add('2');
+    NKROKeyboard.add('3');
+    NKROKeyboard.add('4');
+    NKROKeyboard.add('5');
+    NKROKeyboard.add('6');
+    NKROKeyboard.add('7');
+    NKROKeyboard.add('8');
+    NKROKeyboard.add('9');
+    NKROKeyboard.send();
 
     // Release all keys and hit enter
     NKROKeyboard.releaseAll();

examples/RawHID/KeyboardFeatureReport/KeyboardFeatureReport.ino

@@ -0,0 +1,84 @@
+/*
+  Copyright (c) 2014-2015 NicoHood
+  See the readme for credit to other people.
+
+  KeyboardFeatureReport example
+
+  Shows how to use BootKeyboard with a modified Hyperion Lightpack device.
+  This example also works with RawHID.
+  Might only work under linux.
+  https://github.com/tvdzwan/hyperion/pull/407
+  https://github.com/tvdzwan/hyperion/wiki
+  https://github.com/FastLED/FastLED
+
+  See HID Project documentation for more information.
+  https://github.com/NicoHood/HID/wiki/RawHID-API
+  https://github.com/NicoHood/HID/wiki/Keyboard-API#boot-keyboard
+*/
+
+#include "HID-Project.h"
+
+const int pinLed = LED_BUILTIN;
+
+
+// FastLED
+#include "FastLED.h"
+
+#define LED_PINS    MOSI, SCK // DATA_PIN, or DATA_PIN, CLOCK_PIN
+#define COLOR_ORDER RGB
+#define CHIPSET     WS2801 // WS2811, LPD8806, etc
+#define NUM_LEDS    25
+
+#define BRIGHTNESS  255  // Reduce power consumption
+#define LED_DITHER  255  // Try 0 to disable flickering
+#define CORRECTION  TypicalLEDStrip
+
+CRGB leds[NUM_LEDS]; // Define the array of leds
+
+void setup() {
+  // FastLED setup
+  FastLED.addLeds<CHIPSET, LED_PINS, COLOR_ORDER>(leds, NUM_LEDS).setCorrection(CORRECTION);
+  FastLED.setBrightness(BRIGHTNESS);
+  FastLED.setDither(LED_DITHER);
+
+  // Startup animation
+  fill_solid(leds, NUM_LEDS, CRGB::Red);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Green);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Blue);
+  FastLED.show();
+  delay(500);
+  FastLED.clear();
+  FastLED.show();
+
+  pinMode(pinLed, OUTPUT);
+
+  // Sends a clean report to the host. This is important on any Arduino type.
+  BootKeyboard.begin();
+
+  // Let the feature report data directly point at the led array
+  BootKeyboard.setFeatureReport(leds, sizeof(leds));
+  BootKeyboard.enableFeatureReport();
+}
+
+void loop() {
+  // Check if there is new feature request data from the keyboard
+  if (BootKeyboard.availableFeatureReport())
+  {
+    digitalWrite(pinLed, HIGH);
+
+    // Update leds, do not update in the loop, to avoid corrupted data.
+    // For example if you write (0, 0, 0) and the interrupt
+    // changes the data to (255, 255, 255) you might get (0, 255, 255).
+    // Using a duplicated led array in cli() context would also work.
+    FastLED.show();
+
+    // Release data to let the USB interrupt overwrite it again
+    BootKeyboard.enableFeatureReport();
+
+    digitalWrite(pinLed, LOW);
+  }
+}

examples/RawHID/RawHID.ino

@@ -1,103 +0,0 @@
-/*
-  Copyright (c) 2014-2015 NicoHood
-  See the readme for credit to other people.
-
-  Advanced RawHID example
-
-  Shows how to send bytes via RawHID.
-  Press a button to send some example values.
-
-  Every received data is mirrored to the host.
-  The use of the RawHIDEvent() function is shown too.
-
-  This sketch only tries to show the possiblities
-  and is not perfect.You might want to use RawHID differently.
-
-  See HID Project documentation for more information.
-  https://github.com/NicoHood/HID/wiki/RawHID-API
-*/
-
-#include "HID-Project.h"
-
-const int pinLed = LED_BUILTIN;
-const int pinButton = 2;
-
-uint8_t data[255];
-volatile size_t len = 0;
-
-void setup() {
-  pinMode(pinLed, OUTPUT);
-  pinMode(pinButton, INPUT_PULLUP);
-
-  // No begin/end function required for RawHID
-}
-
-void loop() {
-  // Send data to the host
-  if (!digitalRead(pinButton)) {
-    digitalWrite(pinLed, HIGH);
-
-    // Create buffer with numbers and send it
-    uint8_t megabuff[100];
-    for (uint8_t i = 0; i < sizeof(megabuff); i++) {
-      megabuff[i] = i;
-    }
-    RawHID.write(megabuff, sizeof(megabuff));
-
-    // Simple debounce
-    delay(300);
-    digitalWrite(pinLed, LOW);
-  }
-
-
-  // This will miss longer RawHID data transmissions
-  // and return an error to the host if data was missed.
-  // Only use this for non changing/less important data.
-  // Or you can use this if the event aborted on a full buffer.
-  // Please note, that all data after this full buffer is missed anyways.
-  auto bytesAvailable = RawHID.available();
-  while (bytesAvailable--) {
-    if (len < sizeof(data)) {
-      data[len++] = RawHID.read();
-    }
-  }
-
-  // Process data from the host
-  if (len) {
-    digitalWrite(pinLed, HIGH);
-
-    // Disable interrupts while processing the data
-    uint8_t oldSREG = SREG;
-    cli();
-
-    // Mirror the incoming data from the host back
-    RawHID.write(data, len);
-    len = 0;
-
-    SREG = oldSREG;
-
-    // Simple debounce for led
-    delay(300);
-    digitalWrite(pinLed, LOW);
-  }
-}
-
-void RawHIDEvent(void) {
-  // This event is called via interrupt.
-  // Do not use print inside, or other long function calls!
-  // If you not use this event function,
-  // you might miss some data in the loop,
-  // if the host sends too fast or too much data at once.
-
-  auto bytesAvailable = RawHID.available();
-  while (bytesAvailable--) {
-    // Only add data to the buffer if its not full.
-    // If it is, no more event will occur
-    // and the data should be discarded
-    // or read (as shown) in the loop above.
-    if (len < sizeof(data)) {
-      data[len++] = RawHID.read();
-    }
-  }
-}
-

examples/RawHID/RawHID/RawHID.ino

@@ -0,0 +1,71 @@
+/*
+  Copyright (c) 2014-2015 NicoHood
+  See the readme for credit to other people.
+
+  Advanced RawHID example
+
+  Shows how to send bytes via RawHID.
+  Press a button to send some example values.
+
+  Every received data is mirrored to the host via Serial.
+
+  See HID Project documentation for more information.
+  https://github.com/NicoHood/HID/wiki/RawHID-API
+*/
+
+#include "HID-Project.h"
+
+const int pinLed = LED_BUILTIN;
+const int pinButton = 2;
+
+// Buffer to hold RawHID data.
+// If host tries to send more data than this,
+// it will respond with an error.
+// If the data is not read until the host sends the next data
+// it will also respond with an error and the data will be lost.
+uint8_t rawhidData[255];
+
+void setup() {
+  pinMode(pinLed, OUTPUT);
+  pinMode(pinButton, INPUT_PULLUP);
+
+  Serial.begin(115200);
+
+  // Set the RawHID OUT report array.
+  // Feature reports are also (parallel) possible, see the other example for this.
+  RawHID.begin(rawhidData, sizeof(rawhidData));
+}
+
+void loop() {
+  // Send data to the host
+  if (!digitalRead(pinButton)) {
+    digitalWrite(pinLed, HIGH);
+
+    // Create buffer with numbers and send it
+    uint8_t megabuff[100];
+    for (uint8_t i = 0; i < sizeof(megabuff); i++) {
+      megabuff[i] = i;
+    }
+    RawHID.write(megabuff, sizeof(megabuff));
+
+    // Simple debounce
+    delay(300);
+    digitalWrite(pinLed, LOW);
+  }
+
+
+  // Check if there is new data from the RawHID device
+  auto bytesAvailable = RawHID.available();
+  if (bytesAvailable)
+  {
+    digitalWrite(pinLed, HIGH);
+
+    // Mirror data via Serial
+    while (bytesAvailable--) {
+      Serial.println(RawHID.read());
+    }
+
+    digitalWrite(pinLed, LOW);
+  }
+}
+

examples/RawHID/RawHIDPaintpack/RawHIDPaintpack.ino

@@ -0,0 +1,92 @@
+/*
+  Copyright (c) 2014-2015 NicoHood
+  See the readme for credit to other people.
+
+  RawHIDPaintpack example
+
+  Shows how to use RawHID with the Hyperion Lightpack device.
+  https://github.com/tvdzwan/hyperion/wiki
+  https://github.com/FastLED/FastLED
+
+  See HID Project documentation for more information.
+  https://github.com/NicoHood/HID/wiki/RawHID-API
+  https://github.com/NicoHood/HID/wiki/Keyboard-API#boot-keyboard
+*/
+
+#include "HID-Project.h"
+
+const int pinLed = LED_BUILTIN;
+
+
+// FastLED
+#include "FastLED.h"
+
+#define LED_PINS    MOSI, SCK // DATA_PIN, or DATA_PIN, CLOCK_PIN
+#define COLOR_ORDER RGB
+#define CHIPSET     WS2801 // WS2811, LPD8806, etc
+#define NUM_LEDS    25
+
+#define BRIGHTNESS  255  // Reduce power consumption
+#define LED_DITHER  255  // Try 0 to disable flickering
+#define CORRECTION  TypicalLEDStrip
+
+CRGB leds[NUM_LEDS]; // Define the array of leds
+uint8_t rawhidData[sizeof(leds) + 2];
+
+void setup() {
+  // FastLED setup
+  FastLED.addLeds<CHIPSET, LED_PINS, COLOR_ORDER>(leds, NUM_LEDS).setCorrection(CORRECTION);
+  FastLED.setBrightness(BRIGHTNESS);
+  FastLED.setDither(LED_DITHER);
+
+  // Startup animation
+  fill_solid(leds, NUM_LEDS, CRGB::Red);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Green);
+  FastLED.show();
+  delay(500);
+  fill_solid(leds, NUM_LEDS, CRGB::Blue);
+  FastLED.show();
+  delay(500);
+  FastLED.clear();
+  FastLED.show();
+
+  pinMode(pinLed, OUTPUT);
+
+  // Set the RawHID OUT report array.
+  // Feature reports are also (parallel) possible, see the other example for this.
+  RawHID.begin(rawhidData, sizeof(rawhidData));
+}
+
+void loop() {
+  // Check if there is new data from the RawHID device
+  auto bytesAvailable = RawHID.available();
+  if (bytesAvailable == sizeof(rawhidData))
+  {
+    digitalWrite(pinLed, HIGH);
+
+    // Check header for errors
+    if (RawHID.read() != 3) {
+      return;
+    }
+    if (RawHID.read() != 0) {
+      return;
+    }
+
+    // Write data to led array
+    uint8_t* ptr = (uint8_t*)leds;
+    for (int i = 0; i < sizeof(leds); i++) {
+      *ptr = RawHID.read();
+      ptr++;
+    }
+
+    // Update leds, do not update in the loop, to avoid corrupted data.
+    // For example if you write (0, 0, 0) and the interrupt
+    // changes the data to (255, 255, 255) you might get (0, 255, 255).
+    // Using a duplicated led array in cli() context would also work.
+    FastLED.show();
+
+    digitalWrite(pinLed, LOW);
+  }
+}

examples/SurfaceDial/surface_dial.ino

@@ -0,0 +1,85 @@
+/*
+  Copyright (c) 2017 wind-rider
+  See the readme for credit to other people.
+
+  Surface dial example
+  
+  Use an encoder and a button to create a Surface Dial-compatible device.
+  See the connection diagram how to wire it up.
+
+  Please note that:
+   - I tested it using an Arduino Pro Micro; TinkerCad didn't have that in its component library
+   - you obviously don't need a motor, but TinkerCad didn't have a separate encoder
+
+  The encoder processing code is coming from https://www.allwinedesigns.com/blog/pocketnc-jog-wheel
+*/
+
+#include "HID-Project.h"
+
+// input pins for encoder channel A and channel B
+int pinA = 2;
+int pinB = 3;
+
+// input pin for pushbutton
+int pinButton = 4;
+
+volatile bool previousButtonValue = false;
+
+volatile int previous = 0;
+volatile int counter = 0;
+
+void setup() {
+  pinMode(pinA, INPUT_PULLUP); 
+  pinMode(pinB, INPUT_PULLUP);
+
+  pinMode(pinButton, INPUT_PULLUP);
+
+  attachInterrupt(digitalPinToInterrupt(pinA), changed, CHANGE); 
+  attachInterrupt(digitalPinToInterrupt(pinB), changed, CHANGE);
+  
+  SurfaceDial.begin();
+}
+
+void changed() {
+  int A = digitalRead(pinA); 
+  int B = digitalRead(pinB);
+
+  int current = (A << 1) | B;
+  int combined  = (previous << 2) | current;
+   
+  if(combined == 0b0010 || 
+     combined == 0b1011 ||
+     combined == 0b1101 || 
+     combined == 0b0100) {
+    counter++;
+  }
+   
+  if(combined == 0b0001 ||
+     combined == 0b0111 ||
+     combined == 0b1110 ||
+     combined == 0b1000) {
+    counter--;
+  }
+
+  previous = current;
+}
+
+void loop(){ 
+  bool buttonValue = digitalRead(pinButton);
+  if(buttonValue != previousButtonValue){
+    if(buttonValue) {
+      SurfaceDial.press();
+    } else {
+      SurfaceDial.release();
+    }    
+    previousButtonValue = buttonValue;
+  }
+
+  if(counter >= 4) {
+    SurfaceDial.rotate(10);
+    counter -= 4;
+  } else if(counter <= -4) {
+    SurfaceDial.rotate(-10);
+    counter += 4;
+  } 
+}

extras/ArduinoRawHID.rules

@@ -0,0 +1,44 @@
+# Original taken and modified from:
+# https://github.com/ihowson/Teensy-Raw-HID-in-Python/blob/master/teensy_loader_cli/49-teensy.rules
+#
+# This file must be placed at:
+#
+# /etc/udev/rules.d/ArduinoRawHID.rules    (preferred location)
+#   or
+# /lib/udev/rules.d/ArduinoRawHID.rules    (req'd on some broken systems)
+#
+# SUBSYSTEMS=="usb", ATTRS{idVendor}=="0x2341", ATTRS{idProduct}=="0x8036", MODE:="0666"
+#
+# Reload udev rules:
+# udevadm control --reload && udevadm trigger
+#
+#
+# Arduino devices (leonardo only, or all Arduino devices):
+#SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="8036", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", MODE:="0666"
+#
+#
+#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", MODE:="0666"
+#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="8000", MODE:="0666"
+#KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", SYMLINK+="ttyUSB00%n", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1"
+#
+# If you share your linux system with other users, or just don't like the
+# idea of write permission for everybody, you can replace MODE:="0666" with
+# OWNER:="yourusername" to create the device owned by you, or with
+# GROUP:="somegroupname" and mange access using standard unix groups.
+#
+#
+# If using USB Serial you get a new device each time (Ubuntu 9.10)
+# eg: /dev/ttyACM0, ttyACM1, ttyACM2, ttyACM3, ttyACM4, etc
+#    apt-get remove --purge modemmanager     (reboot may be necessary)
+#
+#
+# Older modem proding (eg, Ubuntu 9.04) caused very slow serial device detection.
+# To fix, add this near top of /lib/udev/rules.d/77-nm-probe-modem-capabilities.rules
+#   SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", GOTO="nm_modem_probe_end" 
+#
+#
+# (old udev rules)
+#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="047[78]", MODE:="0666"
+#SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="048[02]", MODE:="0666"
+#KERNEL=="ttyACM*", SYMLINK+="ttyUSB00%n", MODE:="0666"

extras/rawhid/hid_LINUX.c

@@ -144,7 +144,7 @@ int rawhid_send(int num, void *buf, int len, int timeout)
 	if (hid->ep_out) {
 		return usb_interrupt_write(hid->usb, hid->ep_out, buf, len, timeout);
 	} else {
-		return usb_control_msg(hid->usb, 0x21, 9, 0, hid->iface, buf, len, timeout);
+		return usb_control_msg(hid->usb, 0x21, 9, 0x0200, hid->iface, buf, len, timeout);
 	}
 }
 

keywords.txt

@@ -13,6 +13,8 @@
 begin	KEYWORD2
 end	KEYWORD2
 press	KEYWORD2
+add	KEYWORD2
+remove	KEYWORD2
 release	KEYWORD2
 releaseAll	KEYWORD2
 
@@ -22,13 +24,10 @@ moveTo	KEYWORD2
 isPressed	KEYWORD2
 
 getLeds	KEYWORD2
-pressKeycode	KEYWORD2
-releaseKeycode	KEYWORD2
-writeKeycode	KEYWORD2
-addKeyToReport	KEYWORD2
-addKeycodeToReport	KEYWORD2
-removeKeyFromReport	KEYWORD2
-removeKeycodeFromReport	KEYWORD2
+setFeatureReport	KEYWORD2
+availableFeatureReport	KEYWORD2
+enableFeatureReport	KEYWORD2
+disableFeatureReport	KEYWORD2
 
 write_unicode	KEYWORD2
 set_modifier	KEYWORD2
@@ -39,7 +38,7 @@ set_key4	KEYWORD2
 set_key5	KEYWORD2
 set_key6	KEYWORD2
 set_media	KEYWORD2
-send_now	KEYWORD2
+send	KEYWORD2
 
 buttons	KEYWORD2
 xAxis	KEYWORD2

library.properties

@@ -1,10 +1,10 @@
 name=HID-Project
-version=2.4
+version=2.4.4
 author=NicoHood
 maintainer=NicoHood <blog@NicoHood.de>
 sentence=Extended HID Functions for Arduino
-paragraph=Includes Consumer, System and Gamepad. Also compatible with Arduino Uno/Mega via HoodLoader2.
-category=Device Control
+paragraph=Includes BootKeyboard/Mouse, Consumer, System, Gamepad, RawHID and more features. Also compatible with Arduino Uno/Mega via HoodLoader2.
+category=Communication
 url=https://github.com/NicoHood/HID
-architectures=*
+architectures=avr
 dot_a_linkage=true

package_NicoHood_HID_index.json

@@ -1,45 +0,0 @@
-{
-  "packages": [
-    {
-      "name": "HID",
-      "maintainer": "NicoHood",
-      "websiteURL": "https://github.com/NicoHood/HID",
-      "email": "",
-      "help": {
-        "online": ""
-      },
-      "platforms": [
-        {
-          "name": "HID Project",
-          "architecture": "avr",
-          "version": "2.2",
-          "category": "HID",
-          "help": {
-            "online": ""
-          },
-          "url": "https://github.com/NicoHood/HID/releases/download/2.2/2.2-boards_manager.zip",
-          "archiveFileName": "2.2-boards_manager.zip",
-          "checksum": "SHA-256:9c86ee28a7ce9fe33e8b07ec643316131e0031b0d22e63bb398902a5fdadbca9",
-          "size": "351303",
-          "boards": [
-            {"name": "Arduino Leonardo"},
-            {"name": "Arduino Micro"}
-          ],
-          "toolsDependencies": [
-            {
-              "packager": "arduino",
-              "name": "avr-gcc",
-              "version": "4.8.1-arduino5"
-            },
-            {
-              "packager": "arduino",
-              "name": "avrdude",
-              "version": "6.0.1-arduino5"
-            }
-          ]
-        }
-      ],
-      "tools": []
-    }
-  ]
-}

src/HID-APIs/AbsoluteMouseAPI.h

@@ -39,9 +39,9 @@ THE SOFTWARE.
 
 typedef union{
 	// Absolute mouse report: 8 buttons, 2 absolute axis, wheel
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	struct{
 		uint8_t buttons;
 		int16_t xAxis;
@@ -71,12 +71,12 @@ public:
 	inline void move(int x, int y, signed char wheel = 0);
 	inline void press(uint8_t b = MOUSE_LEFT);
 	inline void release(uint8_t b = MOUSE_LEFT);
+	inline void releaseAll(void);
 	inline bool isPressed(uint8_t b = MOUSE_LEFT);
-	
+
 	// Sending is public in the base class for advanced users.
 	virtual void SendReport(void* data, int length) = 0;
 };
 
 // Implementation is inline
 #include "AbsoluteMouseAPI.hpp"
-

src/HID-APIs/AbsoluteMouseAPI.hpp

@@ -32,7 +32,7 @@ void AbsoluteMouseAPI::buttons(uint8_t b){
 }
 
 int16_t AbsoluteMouseAPI::qadd16(int16_t base, int16_t increment) {
-	// Separate between subtracting and adding  
+	// Separate between subtracting and adding
 	if (increment < 0) {
 		// Subtracting more would cause an undefined overflow
  		if ((int16_t)0x8000 - increment > base)
@@ -50,7 +50,7 @@ int16_t AbsoluteMouseAPI::qadd16(int16_t base, int16_t increment) {
 	return base;
 }
 
-AbsoluteMouseAPI::AbsoluteMouseAPI(void): 
+AbsoluteMouseAPI::AbsoluteMouseAPI(void):
 xAxis(0), yAxis(0), _buttons(0)
 {
 	// Empty
@@ -98,6 +98,11 @@ void AbsoluteMouseAPI::release(uint8_t b){
 	buttons(_buttons & ~b);
 }
 
+void AbsoluteMouseAPI::releaseAll(void){
+	_buttons = 0;
+	moveTo(xAxis, yAxis, 0);
+}
+
 bool AbsoluteMouseAPI::isPressed(uint8_t b){
 	// check LEFT by default
 	if ((b & _buttons) > 0)

src/HID-APIs/ConsumerAPI.h

@@ -49,6 +49,9 @@ enum ConsumerKeycode : uint16_t {
 	MEDIA_VOLUME_DOWN	= 0xEA,
 	MEDIA_VOL_DOWN	= 0xEA, // Alias
 
+	CONSUMER_BRIGHTNESS_UP = 0x006F,
+	CONSUMER_BRIGHTNESS_DOWN = 0x0070,
+
 	CONSUMER_SCREENSAVER = 0x19e,
 
 	CONSUMER_PROGRAMMABLE_BUTTON_CONFIGURATION = 0x182,
@@ -450,9 +453,9 @@ enum ConsumerKeycode : uint16_t {
 
 typedef union {
 	// Every usable Consumer key possible, up to 4 keys presses possible
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	ConsumerKeycode keys[4];
 	struct {
 		ConsumerKeycode key1;
@@ -472,7 +475,7 @@ public:
 	inline void press(ConsumerKeycode m);
 	inline void release(ConsumerKeycode m);
 	inline void releaseAll(void);
-	
+
 	// Sending is public in the base class for advanced users.
 	virtual void SendReport(void* data, int length) = 0;
 
@@ -482,4 +485,3 @@ protected:
 
 // Implementation is inline
 #include "ConsumerAPI.hpp"
-

src/HID-APIs/DefaultKeyboardAPI.h

@@ -29,9 +29,9 @@ THE SOFTWARE.
 
 typedef union{
 	// Low level key report: up to 6 keys and shift, ctrl etc at once
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	struct{
 		uint8_t modifiers;
 		uint8_t reserved;
@@ -74,4 +74,3 @@ private:
 
 // Implementation is inline
 #include "DefaultKeyboardAPI.hpp"
-

src/HID-APIs/DefaultKeyboardAPI.hpp

@@ -33,7 +33,7 @@ size_t DefaultKeyboardAPI::set(KeyboardKeycode k, bool s)
 		// Convert key into bitfield (0 - 7)
 		k = KeyboardKeycode(uint8_t(k) - uint8_t(KEY_LEFT_CTRL));
 		if(s){
-			_keyReport.modifiers = (1 << k);
+			_keyReport.modifiers |= (1 << k);
 		}
 		else{
 			_keyReport.modifiers &= ~(1 << k);

src/HID-APIs/GamepadAPI.h

@@ -41,9 +41,9 @@ THE SOFTWARE.
 
 typedef union {
 	// 32 Buttons, 6 Axis, 2 D-Pads
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	uint32_t buttons;
 
 	struct{
@@ -117,7 +117,7 @@ public:
 	inline void rzAxis(int8_t a);
 	inline void dPad1(int8_t d);
 	inline void dPad2(int8_t d);
-	
+
 	// Sending is public in the base class for advanced users.
 	virtual void SendReport(void* data, int length) = 0;
 
@@ -127,4 +127,3 @@ protected:
 
 // Implementation is inline
 #include "GamepadAPI.hpp"
-

src/HID-APIs/MouseAPI.h

@@ -39,9 +39,9 @@ THE SOFTWARE.
 
 typedef union{
 	// Mouse report: 8 buttons, position, wheel
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	struct{
 		uint8_t buttons;
 		int8_t xAxis;
@@ -53,9 +53,9 @@ typedef union{
 typedef union{
 	// BootMouse report: 3 buttons, position
 	// Wheel is not supported by boot protocol
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	struct{
 		uint8_t buttons;
 		int8_t xAxis;
@@ -70,14 +70,15 @@ public:
   inline void begin(void);
   inline void end(void);
   inline void click(uint8_t b = MOUSE_LEFT);
-  inline void move(signed char x, signed char y, signed char wheel = 0); 
+  inline void move(signed char x, signed char y, signed char wheel = 0);
   inline void press(uint8_t b = MOUSE_LEFT);   // press LEFT by default
   inline void release(uint8_t b = MOUSE_LEFT); // release LEFT by default
+	inline void releaseAll(void);
   inline bool isPressed(uint8_t b = MOUSE_LEFT); // check LEFT by default
-  
+
   // Sending is public in the base class for advanced users.
   virtual void SendReport(void* data, int length) = 0;
-  
+
 protected:
   uint8_t _buttons;
   inline void buttons(uint8_t b);

src/HID-APIs/MouseAPI.hpp

@@ -29,12 +29,12 @@ MouseAPI::MouseAPI(void) : _buttons(0)
 	// Empty
 }
 
-void MouseAPI::begin(void) 
+void MouseAPI::begin(void)
 {
     end();
 }
 
-void MouseAPI::end(void) 
+void MouseAPI::end(void)
 {
     _buttons = 0;
     move(0, 0, 0);
@@ -67,7 +67,7 @@ void MouseAPI::buttons(uint8_t b)
 	}
 }
 
-void MouseAPI::press(uint8_t b) 
+void MouseAPI::press(uint8_t b)
 {
 	buttons(_buttons | b);
 }
@@ -77,10 +77,15 @@ void MouseAPI::release(uint8_t b)
 	buttons(_buttons & ~b);
 }
 
+void MouseAPI::releaseAll(void)
+{
+  _buttons = 0;
+	move(0,0,0);
+}
+
 bool MouseAPI::isPressed(uint8_t b)
 {
-	if ((b & _buttons) > 0) 
+	if ((b & _buttons) > 0)
 		return true;
 	return false;
 }
-

src/HID-APIs/NKROKeyboardAPI.h

@@ -32,9 +32,9 @@ THE SOFTWARE.
 
 typedef union{
 	// Modifier + keymap + 1 custom key
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	struct{
 		uint8_t modifiers;
 		uint8_t keys[NKRO_KEY_COUNT / 8];
@@ -43,7 +43,7 @@ typedef union{
 	uint8_t allkeys[2 + NKRO_KEY_COUNT / 8];
 } HID_NKROKeyboardReport_Data_t;
 
-	
+
 class NKROKeyboardAPI : public KeyboardAPI
 {
 public:
@@ -62,4 +62,3 @@ private:
 
 // Implementation is inline
 #include "NKROKeyboardAPI.hpp"
-

src/HID-APIs/NKROKeyboardAPI.hpp

@@ -45,7 +45,7 @@ size_t NKROKeyboardAPI::set(KeyboardKeycode k, bool s)
 		// Convert key into bitfield (0 - 7)
 		k = KeyboardKeycode(uint8_t(k) - uint8_t(KEY_LEFT_CTRL));
 		if(s){
-			_keyReport.modifiers = (1 << k);
+			_keyReport.modifiers |= (1 << k);
 		}
 		else{
 			_keyReport.modifiers &= ~(1 << k);

src/HID-APIs/SurfaceDialAPI.h

@@ -0,0 +1,66 @@
+/*
+Copyright (c) 2014-2015 NicoHood
+See the readme for credit to other people.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*/
+
+// Include guard
+#pragma once
+
+#include <Arduino.h>
+#include "HID-Settings.h"
+
+typedef union{
+	// SurfaceDial report: 1 button, 15-bit rotation, position
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
+	struct{
+		uint16_t button: 1;
+		uint16_t rotation: 15;
+		//int8_t xAxis;
+		//int8_t yAxis;
+		
+	};
+} HID_SurfaceDialReport_Data_t;
+
+class SurfaceDialAPI
+{
+public:
+  inline SurfaceDialAPI(void);
+  inline void begin(void);
+  inline void end(void);
+  inline void click(void);
+  inline void rotate(int16_t rotation);
+  inline void press(void);
+  inline void release(void);
+	inline void releaseAll(void);
+  inline bool isPressed();
+
+  // Sending is public in the base class for advanced users.
+  virtual void SendReport(void* data, int length) = 0;
+
+protected:
+  bool _button;
+  inline void button(bool b);
+};
+
+// Implementation is inline
+#include "SurfaceDialAPI.hpp"

src/HID-APIs/SurfaceDialAPI.hpp

@@ -0,0 +1,90 @@
+/*
+Copyright (c) 2014-2015 NicoHood
+See the readme for credit to other people.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*/
+
+// Include guard
+#pragma once
+
+SurfaceDialAPI::SurfaceDialAPI(void) : _button(false)
+{
+	// Empty
+}
+
+void SurfaceDialAPI::begin(void)
+{
+	end();
+}
+
+void SurfaceDialAPI::end(void)
+{
+	_button = false;
+	rotate(0);
+}
+
+void SurfaceDialAPI::click(void)
+{
+	_button = true;
+	rotate(0);
+	_button = false;
+	rotate(0);
+}
+
+void SurfaceDialAPI::rotate(int16_t rotation)
+{
+	HID_SurfaceDialReport_Data_t report;
+	report.button = _button;
+	report.rotation = rotation;
+	//report.xAxis = x;
+	//report.yAxis = y;
+
+	SendReport(&report, sizeof(report));
+}
+
+void SurfaceDialAPI::button(bool b)
+{
+	if (b != _button)
+	{
+		_button = b;
+		rotate(0);
+	}
+}
+
+void SurfaceDialAPI::press(void)
+{
+	button(true);
+}
+
+void SurfaceDialAPI::release(void)
+{
+	button(false);
+}
+
+void SurfaceDialAPI::releaseAll(void)
+{
+	_button = false;
+	rotate(0);
+}
+
+bool SurfaceDialAPI::isPressed()
+{
+	return _button;	
+}

src/HID-APIs/SystemAPI.h

@@ -76,7 +76,7 @@ enum SystemKeycode : uint8_t {
 
 typedef union{
 	// Every usable system control key possible
-	uint8_t whole8[];
+	uint8_t whole8[0];
 	uint8_t key;
 } HID_SystemControlReport_Data_t;
 
@@ -89,7 +89,7 @@ public:
 	inline void press(SystemKeycode s);
 	inline void release(void);
 	inline void releaseAll(void);
-	
+
 	// Sending is public in the base class for advanced users.
 	virtual void SendReport(void* data, int length) = 0;
 };

src/HID-Project.h

@@ -25,13 +25,10 @@ THE SOFTWARE.
 #pragma once
 
 // Software version
-#define HID_PROJECT_VERSION 240
+#define HID_PROJECT_VERSION 244
 
-// TODO remove https://github.com/arduino/arduino-builder/issues/33
-#include <Arduino.h>
-
-#if ARDUINO < 10606
-#error HID Project requires Arduino IDE 1.6.6 or greater. Please update your IDE.
+#if ARDUINO < 10607
+#error HID Project requires Arduino IDE 1.6.7 or greater. Please update your IDE.
 #endif
 
 #if !defined(USBCON)
@@ -54,7 +51,7 @@ THE SOFTWARE.
 #include "MultiReport/ImprovedKeyboard.h"
 #include "SingleReport/SingleNKROKeyboard.h"
 #include "MultiReport/NKROKeyboard.h"
+#include "MultiReport/SurfaceDial.h"
 
 // Include Teensy HID afterwards to overwrite key definitions if used
 // TODO include Teensy API if non english keyboard layout was used
-

src/HID-Settings.h

@@ -108,3 +108,7 @@ THE SOFTWARE.
 #ifndef HID_REPORTID_TEENSY_KEYBOARD
 #define HID_REPORTID_TEENSY_KEYBOARD 9
 #endif
+
+#ifndef HID_REPORTID_SURFACEDIAL
+#define HID_REPORTID_SURFACEDIAL 10
+#endif

src/MultiReport/ImprovedKeyboard.h

@@ -37,8 +37,7 @@ public:
     Keyboard_(void);
     void wakeupHost(void);
 
-protected: 
-    virtual inline int send(void) override;
+    virtual inline int send(void) final;
 };
 extern Keyboard_ Keyboard;
 

src/MultiReport/NKROKeyboard.h

@@ -36,8 +36,7 @@ class NKROKeyboard_ : public NKROKeyboardAPI
 public:
     NKROKeyboard_(void);
 
-protected: 
-    virtual inline int send(void) override;
+    virtual int send(void) final;
 };
 extern NKROKeyboard_ NKROKeyboard;
 

src/MultiReport/SurfaceDial.cpp

@@ -0,0 +1,87 @@
+/*
+Copyright (c) 2014-2015 NicoHood
+See the readme for credit to other people.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*/
+
+#include "SurfaceDial.h"
+
+static const uint8_t _hidMultiReportDescriptorSurfaceDial[] PROGMEM = {
+    // Integrated Radial Controller TLC
+    0x05, 0x01,       // USAGE_PAGE (Generic Desktop)
+    0x09, 0x0e,       // USAGE (System Multi-Axis Controller)
+    0xa1, 0x01,       // COLLECTION (Application)
+    0x85, HID_REPORTID_SURFACEDIAL,       //   REPORT_ID (Radial Controller)
+    0x05, 0x0d,       //   USAGE_PAGE (Digitizers)
+    0x09, 0x21,       //   USAGE (Puck)
+    0xa1, 0x00,       //   COLLECTION (Physical)
+    0x05, 0x09,       //     USAGE_PAGE (Buttons)
+    0x09, 0x01,       //     USAGE (Button 1)
+    0x95, 0x01,       //     REPORT_COUNT (1)
+    0x75, 0x01,       //     REPORT_SIZE (1)
+    0x15, 0x00,       //     LOGICAL_MINIMUM (0)
+    0x25, 0x01,       //     LOGICAL_MAXIMUM (1)
+    0x81, 0x02,       //     INPUT (Data,Var,Abs)
+    0x05, 0x01,       //     USAGE_PAGE (Generic Desktop)
+    0x09, 0x37,       //     USAGE (Dial)
+    0x95, 0x01,       //     REPORT_COUNT (1)
+    0x75, 0x0f,       //     REPORT_SIZE (15)
+    0x55, 0x0f,       //     UNIT_EXPONENT (-1)
+    0x65, 0x14,       //     UNIT (Degrees, English Rotation)
+    0x36, 0xf0, 0xf1, //     PHYSICAL_MINIMUM (-3600)
+    0x46, 0x10, 0x0e, //     PHYSICAL_MAXIMUM (3600)
+    0x16, 0xf0, 0xf1, //     LOGICAL_MINIMUM (-3600)
+    0x26, 0x10, 0x0e, //     LOGICAL_MAXIMUM (3600)
+    0x81, 0x06,       //     INPUT (Data,Var,Rel)
+    // 0x09, 0x30,       //     USAGE (X)
+    // 0x75, 0x10,       //     REPORT_SIZE (16)
+    // 0x55, 0x0d,       //     UNIT_EXPONENT (-3)
+    // 0x65, 0x13,       //     UNIT (Inch,EngLinear)
+    // 0x35, 0x00,       //     PHYSICAL_MINIMUM (0)
+    // 0x46, 0xc0, 0x5d, //     PHYSICAL_MAXIMUM (24000)
+    // 0x15, 0x00,       //     LOGICAL_MINIMUM (0)
+    // 0x26, 0xff, 0x7f, //     LOGICAL_MAXIMUM (32767)
+    // 0x81, 0x02,       //     INPUT (Data,Var,Abs)
+    // 0x09, 0x31,       //     USAGE (Y)
+    // 0x46, 0xb0, 0x36, //     PHYSICAL_MAXIMUM (14000)
+    // 0x81, 0x02,       //     INPUT (Data,Var,Abs)
+    // 0x05, 0x0d,       //     USAGE_PAGE (Digitizers)
+    // 0x09, 0x48,       //     USAGE (Width)
+    // 0x36, 0xb8, 0x0b, //     PHYSICAL_MINIMUM (3000)
+    // 0x46, 0xb8, 0x0b, //     PHYSICAL_MAXIMUM (3000)
+    // 0x16, 0xb8, 0x0b, //     LOGICAL_MINIMUM (3000)
+    // 0x26, 0xb8, 0x0b, //     LOGICAL_MAXIMUM (3000)
+    // 0x81, 0x03        //     INPUT (Cnst,Var,Abs)
+    0xc0,             //   END_COLLECTION
+    0xc0              // END_COLLECTION
+};
+
+SurfaceDial_::SurfaceDial_(void)
+{
+    static HIDSubDescriptor node(_hidMultiReportDescriptorSurfaceDial, sizeof(_hidMultiReportDescriptorSurfaceDial));
+    HID().AppendDescriptor(&node);
+}
+
+void SurfaceDial_::SendReport(void *data, int length)
+{
+    HID().SendReport(HID_REPORTID_SURFACEDIAL, data, length);
+}
+
+SurfaceDial_ SurfaceDial;

src/MultiReport/SurfaceDial.h

@@ -0,0 +1,43 @@
+/*
+Copyright (c) 2014-2015 NicoHood
+See the readme for credit to other people.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*/
+
+// Include guard
+#pragma once
+
+#include <Arduino.h>
+#include "PluggableUSB.h"
+#include "HID.h"
+#include "HID-Settings.h"
+#include "../HID-APIs/SurfaceDialAPI.h"
+
+
+class SurfaceDial_ : public SurfaceDialAPI
+{
+public:
+    SurfaceDial_(void);
+
+protected: 
+    virtual inline void SendReport(void* data, int length) override;
+};
+extern SurfaceDial_ SurfaceDial;
+

src/SingleReport/BootKeyboard.cpp

@@ -71,7 +71,7 @@ static const uint8_t _hidReportDescriptorKeyboard[] PROGMEM = {
     0xc0                            /* END_COLLECTION */
 };
 
-BootKeyboard_::BootKeyboard_(void) : PluggableUSBModule(1, 1, epType), protocol(HID_REPORT_PROTOCOL), idle(1), leds(0)
+BootKeyboard_::BootKeyboard_(void) : PluggableUSBModule(1, 1, epType), protocol(HID_REPORT_PROTOCOL), idle(1), leds(0), featureReport(NULL), featureLength(0)
 {
 	epType[0] = EP_TYPE_INTERRUPT_IN;
 	PluggableUSB().plug(this);
@@ -120,10 +120,12 @@ bool BootKeyboard_::setup(USBSetup& setup)
 			return true;
 		}
 		if (request == HID_GET_PROTOCOL) {
+			// TODO improve
 			UEDATX = protocol;
 			return true;
 		}
 		if (request == HID_GET_IDLE) {
+			// TODO improve
 			UEDATX = idle;
 			return true;
 		}
@@ -141,10 +143,39 @@ bool BootKeyboard_::setup(USBSetup& setup)
 		}
 		if (request == HID_SET_REPORT)
 		{
-			// Check if data has the correct length
-			auto length = setup.wLength;
-			if(length == sizeof(leds)){
-				USB_RecvControl(&leds, length);
+			// Check if data has the correct length afterwards
+			int length = setup.wLength;
+
+			// Feature (set feature report)
+			if(setup.wValueH == HID_REPORT_TYPE_FEATURE){
+				// No need to check for negative featureLength values,
+				// except the host tries to send more then 32k bytes.
+				// We dont have that much ram anyways.
+				if (length == featureLength) {
+					USB_RecvControl(featureReport, featureLength);
+
+					// Block until data is read (make length negative)
+					disableFeatureReport();
+					return true;
+				}
+				// TODO fake clear data?
+			}
+
+			// Output (set led states)
+			else if(setup.wValueH == HID_REPORT_TYPE_OUTPUT){
+				if(length == sizeof(leds)){
+					USB_RecvControl(&leds, length);
+					return true;
+				}
+			}
+
+			// Input (set HID report)
+			else if(setup.wValueH == HID_REPORT_TYPE_INPUT)
+			{
+				if(length == sizeof(_keyReport)){
+					USB_RecvControl(&_keyReport, length);
+					return true;
+				}
 			}
 		}
 	}

src/SingleReport/BootKeyboard.h

@@ -38,6 +38,33 @@ public:
     uint8_t getLeds(void);
     uint8_t getProtocol(void);
     void wakeupHost(void);
+    
+    void setFeatureReport(void* report, int length){
+        if(length > 0){
+            featureReport = (uint8_t*)report;
+            featureLength = length;
+            
+            // Disable feature report by default
+            disableFeatureReport();
+        }
+    }
+    
+    int availableFeatureReport(void){
+        if(featureLength < 0){
+            return featureLength & ~0x8000;
+        }
+        return 0;
+    }
+    
+    void enableFeatureReport(void){
+        featureLength &= ~0x8000;
+    }
+    
+    void disableFeatureReport(void){
+        featureLength |= 0x8000;
+    }
+    
+    virtual int send(void) final;
 
 protected:
     // Implementation of the PUSBListNode
@@ -51,7 +78,8 @@ protected:
     
     uint8_t leds;
     
-    virtual int send(void) override;
+    uint8_t* featureReport;
+    int featureLength;
 };
 extern BootKeyboard_ BootKeyboard;
 

src/SingleReport/RawHID.cpp

@@ -47,13 +47,7 @@ static const uint8_t  _hidReportDescriptorRawHID[] PROGMEM = {
     0xC0                         /* end collection */ 
 };
 
-// Weak implementation of the Event function
-void RawHIDEvent(void) __attribute__ ((weak));
-void RawHIDEvent(void){
-	// Empty
-}
-
-RawHID_::RawHID_(void) : PluggableUSBModule(1, 1, epType), protocol(HID_REPORT_PROTOCOL), idle(1), dataLength(0)
+RawHID_::RawHID_(void) : PluggableUSBModule(1, 1, epType), protocol(HID_REPORT_PROTOCOL), idle(1), dataLength(0), dataAvailable(0), featureReport(NULL), featureLength(0)
 {
 	epType[0] = EP_TYPE_INTERRUPT_IN;
 	PluggableUSB().plug(this);
@@ -120,50 +114,36 @@ bool RawHID_::setup(USBSetup& setup)
 		}
 		if (request == HID_SET_REPORT)
 		{
-			// Get the data length information and the corresponding bytes
+			// Check if data has the correct length afterwards
 			int length = setup.wLength;
-			while(length)
-			{
-				// Dont receive more than the USB EP has to offer
-				// TODO use fixed 64 because control EP always have 64 bytes even on 16 u2. Test!
-				auto recvLength = length;
-				if(recvLength > USB_EP_SIZE){
-					recvLength = USB_EP_SIZE;
-				}
-				if(recvLength > int(sizeof(data))){
-					recvLength = int(sizeof(data));
-				}
-				length -= recvLength;
-				
-				// Only receive data if the last one was read fully.
-				// Discard data if it wasnt read yet.
-				// To not miss any data you can use the (weak) event function.
-				if(!dataLength)
-				{
-					// Write data to fit to the end (not the beginning) of the array
-					USB_RecvControl(data + (sizeof(data) - recvLength), recvLength);
-					dataLength = recvLength;
-					RawHIDEvent();
-				}
-				// Do not read the data, flag an error to the USB Host
-				// TODO always return no error, even if data was discarded? -> use break then
-				else{
-					return false;
+
+			// Feature (set feature report)
+			if(setup.wValueH == HID_REPORT_TYPE_FEATURE){
+				// No need to check for negative featureLength values,
+				// except the host tries to send more then 32k bytes.
+				// We dont have that much ram anyways.
+				if (length == featureLength) {
+					USB_RecvControl(featureReport, featureLength);
+
+					// Block until data is read (make length negative)
+					disableFeatureReport();
+					return true;
+				}
+			}
+
+			// Output (set out report)
+			else if(setup.wValueH == HID_REPORT_TYPE_OUTPUT){
+				if(!dataAvailable && length <= dataLength){
+					// Write data to fit to the end (not the beginning) of the array
+					USB_RecvControl(data + dataLength - length, length);
+					dataAvailable = length;
+					return true;
 				}
 			}
-			
-			// Flag no error
-			// TODO this is required to get hyperion working
-			// however this blocks the CDC serial!?
-			return true;
 		}
 	}
 
 	return false;
 }
 
-void RawHID_::SendReport(void* data, int length){
-	USB_Send(pluggedEndpoint | TRANSFER_RELEASE, data, length);
-}
-
 RawHID_ RawHID;

src/SingleReport/RawHID.h

@@ -54,17 +54,17 @@ THE SOFTWARE.
 
 typedef union{
 	// a RAWHID_TX_SIZE byte buffer for tx
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	uint8_t buff[RAWHID_TX_SIZE];
 } HID_RawKeyboardTXReport_Data_t;
 
 typedef union{
 	// a RAWHID_TX_SIZE byte buffer for rx
-	uint8_t whole8[];
-	uint16_t whole16[];
-	uint32_t whole32[];
+	uint8_t whole8[0];
+	uint16_t whole16[0];
+	uint32_t whole32[0];
 	uint8_t buff[RAWHID_RX_SIZE];
 } HID_RawKeyboardRXReport_Data_t;
 
@@ -73,36 +73,77 @@ class RawHID_ : public PluggableUSBModule, public Stream
 public:
 	RawHID_(void);
 
-	void begin(void){
-		// empty
+    void setFeatureReport(void* report, int length){
+        if(length > 0){
+            featureReport = (uint8_t*)report;
+            featureLength = length;
+
+            // Disable feature report by default
+            disableFeatureReport();
+        }
+    }
+
+    int availableFeatureReport(void){
+        if(featureLength < 0){
+            return featureLength & ~0x8000;
+        }
+        return 0;
+    }
+
+    void enableFeatureReport(void){
+        featureLength &= ~0x8000;
+    }
+
+    void disableFeatureReport(void){
+        featureLength |= 0x8000;
+    }
+
+	void begin(void* report, int length){
+        if(length > 0){
+            data = (uint8_t*)report;
+            dataLength = length;
+            dataAvailable = 0;
+        }
 	}
 
 	void end(void){
-		// empty
+		disable();
+		dataLength = 0;
 	}
-	
+
+	void enable(void){
+		dataAvailable = 0;
+	}
+
+	void disable(void){
+		dataAvailable = -1;
+	}
+
 	virtual int available(void){
-		return dataLength;
+		if(dataAvailable < 0){
+			return 0;
+		}
+		return dataAvailable;
 	}
-	
+
 	virtual int read(){
 		// Check if we have data available
-		if(dataLength)
+		if(dataAvailable > 0)
 		{
 			// Get next data byte (from the start to the end)
-			return data[sizeof(data) - dataLength--];
+			return data[dataLength - dataAvailable--];
 		}
 		return -1;
 	}
-	
+
 	virtual int peek(){
 		// Check if we have data available
-		if(dataLength){
-			return data[sizeof(data) - dataLength];
+		if(dataAvailable > 0){
+			return data[dataLength - dataAvailable];
 		}
 		return -1;
 	}
-	
+
 	virtual void flush(void){
 		// Writing will always flush by the USB driver
 	}
@@ -114,40 +155,25 @@ public:
 	}
 
 	virtual size_t write(uint8_t *buffer, size_t size){
-		// TODO this will split the data into proper USB_EP_SIZE packets already
-		SendReport(buffer, size);
-		return size;
-	
-		size_t bytesleft = size;
-		// First work through the buffer thats already there
-		while (bytesleft >= RAWHID_TX_SIZE){
-			SendReport(&buffer[size - bytesleft], RAWHID_TX_SIZE);
-			bytesleft -= RAWHID_TX_SIZE;
-		}
-		
-		// Write down the leftover bytes and fill with zeros
-		if (bytesleft){
-			SendReport(&buffer[size - bytesleft], bytesleft);
-		}
-		
-		return size;
+		return USB_Send(pluggedEndpoint | TRANSFER_RELEASE, buffer, size);
 	}
-	
-	void SendReport(void* data, int length);
-	
+
 protected:
     // Implementation of the PUSBListNode
     int getInterface(uint8_t* interfaceCount);
     int getDescriptor(USBSetup& setup);
     bool setup(USBSetup& setup);
-    
+
     uint8_t epType[1];
     uint8_t protocol;
     uint8_t idle;
-    
+
 	// Buffer pointers to hold the received data
 	int dataLength;
-	uint8_t data[RAWHID_RX_SIZE];
+	int dataAvailable;
+	uint8_t* data;
+
+	uint8_t* featureReport;
+	int featureLength;
 };
 extern RawHID_ RawHID;
-

src/SingleReport/SingleNKROKeyboard.h

@@ -37,6 +37,8 @@ public:
     SingleNKROKeyboard_(void);
     uint8_t getLeds(void);
     uint8_t getProtocol(void);
+    
+    virtual int send(void) final;
 
 protected:
     // Implementation of the PUSBListNode
@@ -49,8 +51,6 @@ protected:
     uint8_t idle;
     
     uint8_t leds;
-    
-    virtual inline int send(void) override;
 };
 extern SingleNKROKeyboard_ SingleNKROKeyboard;