pingu_98/MrDraw
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
MrDraw/src/octoprint/translations/messages.pot

1250 lines
29 KiB
Text
Raw Normal View History

First version of OctoPrint with i18n/l10n support Also included is a translation for (informal) german. New languages can be added with "python setup.py babel_new --locale=<language code>" which will create the corresponding .po file from the existing .pot file under "src/octoprint/translations/<language code>". Translations can be refreshed from strings in source with "python setup.py babel_refresh". Existing translations can be compiled into usable translation files (.mo for python and .js for Javascript) via "python setup.py babel_compile". You'll need to install the development dependencies for all of this to work, just issue "pip install -r requirements-dev.txt" Note: numbers are not yet correctly formatted for their respective locale (e.g. "2.5mm" instead of "2,5mm" in german).
2014-08-27 12:46:46 +00:00
# Translations template for OctoPrint.
# Copyright (C) 2014 The OctoPrint Project
# This file is distributed under the same license as the OctoPrint project.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2014.
#
#, fuzzy
msgid ""
msgstr ""
i18n: Made the string "OctoPrint" translatable too to allow for different writing systems
2014-08-27 18:11:45 +00:00
"Project-Id-Version: OctoPrint 1.2.0-dev-124-g571cf9c-dirty\n"
First version of OctoPrint with i18n/l10n support Also included is a translation for (informal) german. New languages can be added with "python setup.py babel_new --locale=<language code>" which will create the corresponding .po file from the existing .pot file under "src/octoprint/translations/<language code>". Translations can be refreshed from strings in source with "python setup.py babel_refresh". Existing translations can be compiled into usable translation files (.mo for python and .js for Javascript) via "python setup.py babel_compile". You'll need to install the development dependencies for all of this to work, just issue "pip install -r requirements-dev.txt" Note: numbers are not yet correctly formatted for their respective locale (e.g. "2.5mm" instead of "2,5mm" in german).
2014-08-27 12:46:46 +00:00
"Report-Msgid-Bugs-To: i18n@octoprint.org\n"
i18n: Made the string "OctoPrint" translatable too to allow for different writing systems
2014-08-27 18:11:45 +00:00
"POT-Creation-Date: 2014-08-27 20:04+0200\n"
First version of OctoPrint with i18n/l10n support Also included is a translation for (informal) german. New languages can be added with "python setup.py babel_new --locale=<language code>" which will create the corresponding .po file from the existing .pot file under "src/octoprint/translations/<language code>". Translations can be refreshed from strings in source with "python setup.py babel_refresh". Existing translations can be compiled into usable translation files (.mo for python and .js for Javascript) via "python setup.py babel_compile". You'll need to install the development dependencies for all of this to work, just issue "pip install -r requirements-dev.txt" Note: numbers are not yet correctly formatted for their respective locale (e.g. "2.5mm" instead of "2,5mm" in german).
2014-08-27 12:46:46 +00:00
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 1.3\n"
#: src/octoprint/static/js/app/dataupdater.js:43
msgid ""
"The server appears to be offline, at least I'm not getting any response "
"from it. I'll try to reconnect automatically <strong>over the next couple"
" of minutes</strong>, however you are welcome to try a manual reconnect "
"anytime using the button below."
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:58
msgid ""
"The server appears to be offline, at least I'm not getting any response "
"from it. I <strong>could not reconnect automatically</strong>, but you "
"may try a manual reconnect using the button below."
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:126
msgid "Rendering timelapse"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:126
#, python-format
msgid "Now rendering timelapse %(movie_basename)s"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:128
msgid "Timelapse ready"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:128
#, python-format
msgid "New timelapse %(movie_basename)s is done rendering."
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:131
#, python-format
msgid ""
"Rendering of timelapse %(movie_basename)s failedwith return code "
"%(returncode)s"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:133
msgid "Rendering failed"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:137
msgid "Slicing ..."
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:142
msgid "Slicing done"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:142
#, python-format
msgid "Sliced %(stl)s to %(gcode)s, took %(time).2f seconds"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:149
#, python-format
msgid "Could not slice %(stl)s to %(gcode)s: %(reason)s"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:150
msgid "Slicing failed"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:154
msgid "Streaming ..."
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:159
msgid "Streaming done"
msgstr ""
#: src/octoprint/static/js/app/dataupdater.js:159
#, python-format
msgid "Streamed %(local)s to %(remote)s on SD, took %(time).2f seconds"
msgstr ""
#: src/octoprint/static/js/app/helpers.js:337
#, python-format
msgid "%(hour)02d:%(minute)02d:%(second)02d"
msgstr ""
#: src/octoprint/static/js/app/helpers.js:342
msgid "YYYY-MM-DD HH:mm"
msgstr ""
#: src/octoprint/static/js/app/helpers.js:360
#: src/octoprint/static/js/app/helpers.js:365
msgid "off"
msgstr ""
#: src/octoprint/static/js/app/main.js:17
msgid "Offline"
msgstr ""
#: src/octoprint/static/js/app/main.js:18
msgid "Opening serial port"
msgstr ""
#: src/octoprint/static/js/app/main.js:19
msgid "Detecting serial port"
msgstr ""
#: src/octoprint/static/js/app/main.js:20
msgid "Detecting baudrate"
msgstr ""
#: src/octoprint/static/js/app/main.js:21
msgid "Connecting"
msgstr ""
#: src/octoprint/static/js/app/main.js:22
msgid "Operational"
msgstr ""
#: src/octoprint/static/js/app/main.js:23
msgid "Printing from SD"
msgstr ""
#: src/octoprint/static/js/app/main.js:24
msgid "Sending file to SD"
msgstr ""
#: src/octoprint/static/js/app/main.js:25
msgid "Printing"
msgstr ""
#: src/octoprint/static/js/app/main.js:26
msgid "Paused"
msgstr ""
#: src/octoprint/static/js/app/main.js:27
msgid "Closed"
msgstr ""
#: src/octoprint/static/js/app/main.js:28
msgid "Transfering file to SD"
msgstr ""
#: src/octoprint/static/js/app/main.js:132
msgid ""
"Could not upload the file. Make sure that it is a GCODE file and has the "
"extension \".gcode\" or \".gco\" or that it is an STL file with the "
"extension \".stl\" and slicing support is enabled and configured."
msgstr ""
#: src/octoprint/static/js/app/main.js:148
msgid "Uploading ..."
msgstr ""
#: src/octoprint/static/js/app/main.js:151
msgid "Saving ..."
msgstr ""
i18n: Made the string "OctoPrint" translatable too to allow for different writing systems
2014-08-27 18:11:45 +00:00
#: src/octoprint/static/js/app/viewmodels/appearance.js:9
#: src/octoprint/static/js/app/viewmodels/appearance.js:11
#: src/octoprint/static/js/app/viewmodels/appearance.js:16
#: src/octoprint/static/js/app/viewmodels/appearance.js:18
msgid "OctoPrint"
msgstr ""
First version of OctoPrint with i18n/l10n support Also included is a translation for (informal) german. New languages can be added with "python setup.py babel_new --locale=<language code>" which will create the corresponding .po file from the existing .pot file under "src/octoprint/translations/<language code>". Translations can be refreshed from strings in source with "python setup.py babel_refresh". Existing translations can be compiled into usable translation files (.mo for python and .js for Javascript) via "python setup.py babel_compile". You'll need to install the development dependencies for all of this to work, just issue "pip install -r requirements-dev.txt" Note: numbers are not yet correctly formatted for their respective locale (e.g. "2.5mm" instead of "2,5mm" in german).
2014-08-27 12:46:46 +00:00
#: src/octoprint/static/js/app/viewmodels/connection.js:24
#: src/octoprint/templates/index.jinja2:117
msgid "Connect"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/connection.js:26
msgid "Disconnect"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/control.js:38
#: src/octoprint/static/js/app/viewmodels/files.js:286
#: src/octoprint/static/js/app/viewmodels/gcode.js:332
#: src/octoprint/static/js/app/viewmodels/gcode.js:363
#: src/octoprint/static/js/app/viewmodels/printerstate.js:137
#: src/octoprint/static/js/app/viewmodels/temperature.js:56
msgid "Tool"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/control.js:45
#: src/octoprint/static/js/app/viewmodels/temperature.js:68
msgid "Hotend"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/files.js:281
#: src/octoprint/static/js/app/viewmodels/files.js:286
msgid "Filament"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/files.js:290
msgid "Estimated Print Time"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/files.js:293
msgid "Last Printed"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/files.js:295
msgid "Last Print Time"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/firstrun.js:37
msgid ""
"If you disable Access Control <strong>and</strong> your OctoPrint "
"installation is accessible from the internet, your printer <strong>will "
"be accessible by everyone - that also includes the bad guys!</strong>"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:13
msgid "Loading..."
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:17
msgid "Analyzing..."
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:21
msgid "Analyzed"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:327
msgid "Model size"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:329
#: src/octoprint/static/js/app/viewmodels/gcode.js:332
msgid "Total filament used"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:329
#: src/octoprint/static/js/app/viewmodels/gcode.js:332
#: src/octoprint/static/js/app/viewmodels/gcode.js:336
msgid "mm"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:335
msgid "Estimated print time"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:336
msgid "Estimated layer height"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:337
msgid "Layer count"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:337
msgid "visited"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:356
msgid "Layer number"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:357
msgid "Layer height"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:358
msgid "GCODE commands in layer"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:360
#: src/octoprint/static/js/app/viewmodels/gcode.js:363
msgid "Filament used by layer"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/gcode.js:366
msgid "Print time for layer"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:15
#: src/octoprint/templates/index.jinja2:74
#: src/octoprint/templates/index.jinja2:85
msgid "Login"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:70
msgid "Login successful"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:70
#, python-format
msgid "You are now logged in as \"%(username)s\""
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:74
msgid "Login failed"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:74
msgid "User unknown or wrong password"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:84
msgid "Logout successful"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/loginstate.js:84
msgid "You are now logged out"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/navigation.js:17
#, python-format
msgid "The command \"%(command)s\" executed successfully"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/navigation.js:20
#, python-format
msgid "The command \"%(command)s\" could not be executed."
msgstr ""
#: src/octoprint/static/js/app/viewmodels/navigation.js:22
msgid "Error"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:66
msgid "Continue"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:68
#: src/octoprint/templates/index.jinja2:144
msgid "Pause"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:79
#: src/octoprint/templates/index.jinja2:524
msgid "On Z Change"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:81
#: src/octoprint/templates/index.jinja2:525
msgid "Timed"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:81
#: src/octoprint/templates/index.jinja2:531
#: src/octoprint/templates/index.jinja2:538
msgid "sec"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/printerstate.js:166
msgid "This will restart the print job from the beginning."
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:15
#: src/octoprint/static/js/app/viewmodels/settings.js:41
msgid "default"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:16
#: src/octoprint/static/js/app/viewmodels/settings.js:27
msgid "red"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:17
#: src/octoprint/static/js/app/viewmodels/settings.js:29
msgid "orange"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:18
#: src/octoprint/static/js/app/viewmodels/settings.js:31
msgid "yellow"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:19
#: src/octoprint/static/js/app/viewmodels/settings.js:33
msgid "green"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:20
#: src/octoprint/static/js/app/viewmodels/settings.js:35
msgid "blue"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:21
#: src/octoprint/static/js/app/viewmodels/settings.js:37
msgid "violet"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/settings.js:22
#: src/octoprint/static/js/app/viewmodels/settings.js:39
msgid "black"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/temperature.js:22
#: src/octoprint/static/js/app/viewmodels/temperature.js:74
#: src/octoprint/templates/settings.jinja2:347
msgid "Bed"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/temperature.js:110
msgid "just now"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/temperature.js:112
msgid "min"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/temperature.js:252
#: src/octoprint/templates/index.jinja2:262
msgid "Actual"
msgstr ""
#: src/octoprint/static/js/app/viewmodels/temperature.js:257
#: src/octoprint/templates/index.jinja2:263
msgid "Target"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:6
msgid "Server is offline"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:9
msgid "Attempt to reconnect"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:20
msgid "Upload locally"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:22
#: src/octoprint/templates/index.jinja2:218
msgid "Upload to SD"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:22
msgid "SD not initialized"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:25
#: src/octoprint/templates/index.jinja2:213
#: src/octoprint/templates/index.jinja2:224
msgid "Upload"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:34
msgid "Are you sure?"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:38
msgid "Are you sure you want to proceed?"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:41
#: src/octoprint/templates/index.jinja2:145
#: src/octoprint/templates/settings.jinja2:676
msgid "Cancel"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:42
msgid "Proceed"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:48
msgid "Configure Access Control"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:51
msgid ""
"<p>\n"
" <strong>Please read the following, it is very important for "
"your printer's health!</strong>\n"
" </p>\n"
" <p>\n"
" OctoPrint by default now ships with Access Control enabled, "
"meaning you won't be able to do anything with the\n"
" printer unless you login first as a configured user. This is "
i18n: Removed a test string I had forgotten to remove earlier and also realised that I hadn't pushed the most recent version yet
2014-08-27 17:41:06 +00:00
"to <strong>prevent strangers - possibly with\n"
First version of OctoPrint with i18n/l10n support Also included is a translation for (informal) german. New languages can be added with "python setup.py babel_new --locale=<language code>" which will create the corresponding .po file from the existing .pot file under "src/octoprint/translations/<language code>". Translations can be refreshed from strings in source with "python setup.py babel_refresh". Existing translations can be compiled into usable translation files (.mo for python and .js for Javascript) via "python setup.py babel_compile". You'll need to install the development dependencies for all of this to work, just issue "pip install -r requirements-dev.txt" Note: numbers are not yet correctly formatted for their respective locale (e.g. "2.5mm" instead of "2,5mm" in german).
2014-08-27 12:46:46 +00:00
" malicious intent - to gain access to your printer</strong> "
"via the internet or another untrustworthy network\n"
" and using it in such a way that it is damaged or worse (i.e. "
"causes a fire).\n"
" </p>\n"
" <p>\n"
" It looks like you haven't configured access control yet. "
"Please <strong>set up an username and password</strong> for the\n"
" initial administrator account who will have full access to "
"both the printer and OctoPrint's settings, then click\n"
" on \"Keep Access Control Enabled\":\n"
" </p>"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:67
#: src/octoprint/templates/index.jinja2:78
#: src/octoprint/templates/index.jinja2:79
#: src/octoprint/templates/settings.jinja2:510
msgid "Username"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:73
#: src/octoprint/templates/index.jinja2:80
#: src/octoprint/templates/index.jinja2:81
#: src/octoprint/templates/settings.jinja2:516
msgid "Password"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:79
msgid "Confirm Password"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:82
#: src/octoprint/templates/settings.jinja2:525
#: src/octoprint/templates/settings.jinja2:596
msgid "Passwords do not match"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:86
msgid ""
"<p>\n"
" <strong>Note:</strong> In case that your OctoPrint "
"installation is only accessible from within a trustworthy network and you"
" don't\n"
" need Access Control for other reasons, you may alternatively "
"disable Access Control. You should only\n"
" do this if you are absolutely certain that only people you "
"know and trust will be able to connect to it.\n"
" </p>\n"
" <p>\n"
" <strong>Do NOT underestimate the risk of an unsecured access "
"from the internet to your printer!</strong>\n"
" </p>"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:96
msgid "Disable Access Control"
msgstr ""
#: src/octoprint/templates/dialogs.jinja2:97
msgid "Keep Access Control Enabled"
msgstr ""
#: src/octoprint/templates/index.jinja2:57
msgid "Settings"
msgstr ""
#: src/octoprint/templates/index.jinja2:63
msgid "System"
msgstr ""
#: src/octoprint/templates/index.jinja2:83
msgid "Remember me"
msgstr ""
#: src/octoprint/templates/index.jinja2:88
msgid "Change Password"
msgstr ""
#: src/octoprint/templates/index.jinja2:89
msgid "Logout"
msgstr ""
#: src/octoprint/templates/index.jinja2:107
#: src/octoprint/templates/settings.jinja2:30
msgid "Serial Port"
msgstr ""
#: src/octoprint/templates/index.jinja2:109
#: src/octoprint/templates/settings.jinja2:36
msgid "Baudrate"
msgstr ""
#: src/octoprint/templates/index.jinja2:112
msgid "Save connection settings"
msgstr ""
#: src/octoprint/templates/index.jinja2:115
msgid "Auto-connect on server startup"
msgstr ""
#: src/octoprint/templates/index.jinja2:123
msgid "State"
msgstr ""
#: src/octoprint/templates/index.jinja2:127
msgid "Machine State"
msgstr ""
#: src/octoprint/templates/index.jinja2:128
msgid "File"
msgstr ""
#: src/octoprint/templates/index.jinja2:129
#: src/octoprint/templates/index.jinja2:247
msgid "Timelapse"
msgstr ""
#: src/octoprint/templates/index.jinja2:133
msgid "Approx. Total Print Time"
msgstr ""
#: src/octoprint/templates/index.jinja2:134
msgid "Print Time"
msgstr ""
#: src/octoprint/templates/index.jinja2:135
msgid "Print Time Left"
msgstr ""
#: src/octoprint/templates/index.jinja2:136
msgid "Printed"
msgstr ""
#: src/octoprint/templates/index.jinja2:143
msgid "Restart"
msgstr ""
#: src/octoprint/templates/index.jinja2:143
msgid "Print"
msgstr ""
#: src/octoprint/templates/index.jinja2:152
msgid "Files"
msgstr ""
#: src/octoprint/templates/index.jinja2:159
msgid "Sort by name"
msgstr ""
#: src/octoprint/templates/index.jinja2:159
#: src/octoprint/templates/index.jinja2:556
#: src/octoprint/templates/settings.jinja2:630
msgid "ascending"
msgstr ""
#: src/octoprint/templates/index.jinja2:160
msgid "Sort by upload date"
msgstr ""
#: src/octoprint/templates/index.jinja2:160
#: src/octoprint/templates/index.jinja2:161
#: src/octoprint/templates/index.jinja2:556
#: src/octoprint/templates/settings.jinja2:630
msgid "descending"
msgstr ""
#: src/octoprint/templates/index.jinja2:161
msgid "Sort by file size"
msgstr ""
#: src/octoprint/templates/index.jinja2:164
msgid "Only show files stored locally"
msgstr ""
#: src/octoprint/templates/index.jinja2:165
msgid "Only show files stored on SD"
msgstr ""
#: src/octoprint/templates/index.jinja2:168
msgid "Hide successfully printed files"
msgstr ""
#: src/octoprint/templates/index.jinja2:178
msgid "Initialize SD card"
msgstr ""
#: src/octoprint/templates/index.jinja2:179
msgid "Refresh SD files"
msgstr ""
#: src/octoprint/templates/index.jinja2:180
msgid "Release SD card"
msgstr ""
#: src/octoprint/templates/index.jinja2:188
msgid "Search..."
msgstr ""
#: src/octoprint/templates/index.jinja2:193
msgid "Uploaded"
msgstr ""
#: src/octoprint/templates/index.jinja2:194
#: src/octoprint/templates/index.jinja2:556
#: src/octoprint/templates/index.jinja2:562
#: src/octoprint/templates/settings.jinja2:630
#: src/octoprint/templates/settings.jinja2:637
msgid "Size"
msgstr ""
#: src/octoprint/templates/index.jinja2:198
msgid "Download"
msgstr ""
#: src/octoprint/templates/index.jinja2:199
msgid "Remove"
msgstr ""
#: src/octoprint/templates/index.jinja2:200
msgid "Load"
msgstr ""
#: src/octoprint/templates/index.jinja2:201
msgid "Load and Print"
msgstr ""
#: src/octoprint/templates/index.jinja2:206
msgid "Free"
msgstr ""
#: src/octoprint/templates/index.jinja2:233
msgid "Hint: You can also drag and drop files on this page to upload them."
msgstr ""
#: src/octoprint/templates/index.jinja2:243
msgid "Temperature"
msgstr ""
#: src/octoprint/templates/index.jinja2:244
msgid "Control"
msgstr ""
#: src/octoprint/templates/index.jinja2:245
msgid "GCode Viewer"
msgstr ""
#: src/octoprint/templates/index.jinja2:246
msgid "Terminal"
msgstr ""
#: src/octoprint/templates/index.jinja2:264
msgid "Offset"
msgstr ""
#: src/octoprint/templates/index.jinja2:280
#: src/octoprint/templates/index.jinja2:302
msgid "Set"
msgstr ""
#: src/octoprint/templates/index.jinja2:292
#: src/octoprint/templates/index.jinja2:523
msgid "Off"
msgstr ""
#: src/octoprint/templates/index.jinja2:360
msgid "Select Tool..."
msgstr ""
#: src/octoprint/templates/index.jinja2:371
msgid "Extrude"
msgstr ""
#: src/octoprint/templates/index.jinja2:372
msgid "Retract"
msgstr ""
#: src/octoprint/templates/index.jinja2:377
msgid "General"
msgstr ""
#: src/octoprint/templates/index.jinja2:379
msgid "Motors off"
msgstr ""
#: src/octoprint/templates/index.jinja2:380
msgid "Fans on"
msgstr ""
#: src/octoprint/templates/index.jinja2:381
msgid "Fans off"
msgstr ""
#: src/octoprint/templates/index.jinja2:445
msgid "Sync with job progress"
msgstr ""
#: src/octoprint/templates/index.jinja2:450
msgid "Center viewport on model"
msgstr ""
#: src/octoprint/templates/index.jinja2:453
msgid "Zoom in on model"
msgstr ""
#: src/octoprint/templates/index.jinja2:459
msgid "Show moves"
msgstr ""
#: src/octoprint/templates/index.jinja2:462
msgid "Show retracts"
msgstr ""
#: src/octoprint/templates/index.jinja2:468
msgid "Also show previous layer"
msgstr ""
#: src/octoprint/templates/index.jinja2:471
msgid "Also show next layer"
msgstr ""
#: src/octoprint/templates/index.jinja2:476
msgid "Reload"
msgstr ""
#: src/octoprint/templates/index.jinja2:503
msgid "Autoscroll"
msgstr ""
#: src/octoprint/templates/index.jinja2:513
msgid "Send"
msgstr ""
#: src/octoprint/templates/index.jinja2:519
msgid "Timelapse Configuration"
msgstr ""
#: src/octoprint/templates/index.jinja2:521
msgid "Timelapse Mode"
msgstr ""
#: src/octoprint/templates/index.jinja2:528
msgid "Timelapse post roll (in rendered seconds)"
msgstr ""
#: src/octoprint/templates/index.jinja2:535
msgid "Interval"
msgstr ""
#: src/octoprint/templates/index.jinja2:544
msgid "Save as default"
msgstr ""
#: src/octoprint/templates/index.jinja2:549
msgid "Save config"
msgstr ""
#: src/octoprint/templates/index.jinja2:553
msgid "Finished Timelapses"
msgstr ""
#: src/octoprint/templates/index.jinja2:556
#: src/octoprint/templates/settings.jinja2:630
msgid "Sort by"
msgstr ""
#: src/octoprint/templates/index.jinja2:556
#: src/octoprint/templates/index.jinja2:561
#: src/octoprint/templates/settings.jinja2:377
#: src/octoprint/templates/settings.jinja2:469
#: src/octoprint/templates/settings.jinja2:630
#: src/octoprint/templates/settings.jinja2:636
msgid "Name"
msgstr ""
#: src/octoprint/templates/index.jinja2:556
msgid "Creation date"
msgstr ""
#: src/octoprint/templates/index.jinja2:563
#: src/octoprint/templates/settings.jinja2:472
#: src/octoprint/templates/settings.jinja2:639
msgid "Action"
msgstr ""
#: src/octoprint/templates/index.jinja2:592
msgid "Version"
msgstr ""
#: src/octoprint/templates/index.jinja2:595
msgid "Homepage"
msgstr ""
#: src/octoprint/templates/index.jinja2:596
msgid "Sourcecode"
msgstr ""
#: src/octoprint/templates/index.jinja2:597
msgid "Documentation"
msgstr ""
#: src/octoprint/templates/index.jinja2:598
msgid "Bugs and Requests"
msgstr ""
#: src/octoprint/templates/settings.jinja2:4
msgid "OctoPrint Settings"
msgstr ""
#: src/octoprint/templates/settings.jinja2:9
msgid "Printer"
msgstr ""
#: src/octoprint/templates/settings.jinja2:10
msgid "Serial Connection"
msgstr ""
#: src/octoprint/templates/settings.jinja2:11
msgid "Printer Parameters"
msgstr ""
#: src/octoprint/templates/settings.jinja2:12
msgid "Temperatures"
msgstr ""
#: src/octoprint/templates/settings.jinja2:13
msgid "Terminal filters"
msgstr ""
#: src/octoprint/templates/settings.jinja2:14
#: src/octoprint/templates/settings.jinja2:15
msgid "Features"
msgstr ""
#: src/octoprint/templates/settings.jinja2:16
msgid "Webcam"
msgstr ""
#: src/octoprint/templates/settings.jinja2:17
msgid "Cura"
msgstr ""
#: src/octoprint/templates/settings.jinja2:18
msgid "Access Control"
msgstr ""
#: src/octoprint/templates/settings.jinja2:19
msgid "API"
msgstr ""
#: src/octoprint/templates/settings.jinja2:21
msgid "Folders"
msgstr ""
#: src/octoprint/templates/settings.jinja2:22
msgid "Appearance"
msgstr ""
#: src/octoprint/templates/settings.jinja2:23
#: src/octoprint/templates/settings.jinja2:626
msgid "Logs"
msgstr ""
#: src/octoprint/templates/settings.jinja2:44
msgid "Auto-connect to printer on server start"
msgstr ""
#: src/octoprint/templates/settings.jinja2:49
msgid "Communication timeout"
msgstr ""
#: src/octoprint/templates/settings.jinja2:58
msgid "Temperature timeout"
msgstr ""
#: src/octoprint/templates/settings.jinja2:67
msgid "SD status timeout"
msgstr ""
#: src/octoprint/templates/settings.jinja2:76
msgid "Connection timeout"
msgstr ""
#: src/octoprint/templates/settings.jinja2:85
msgid "Autodetection timeout"
msgstr ""
#: src/octoprint/templates/settings.jinja2:96
msgid "Log communication to serial.log (might negatively impact performance)"
msgstr ""
#: src/octoprint/templates/settings.jinja2:96
msgid "Warning"
msgstr ""
#: src/octoprint/templates/settings.jinja2:105
msgid "Axis"
msgstr ""
#: src/octoprint/templates/settings.jinja2:107
#: src/octoprint/templates/settings.jinja2:176
msgid "X"
msgstr ""
#: src/octoprint/templates/settings.jinja2:113
#: src/octoprint/templates/settings.jinja2:123
#: src/octoprint/templates/settings.jinja2:133
msgid "Invert control"
msgstr ""
#: src/octoprint/templates/settings.jinja2:117
#: src/octoprint/templates/settings.jinja2:181
msgid "Y"
msgstr ""
#: src/octoprint/templates/settings.jinja2:127
msgid "Z"
msgstr ""
#: src/octoprint/templates/settings.jinja2:137
msgid "E"
msgstr ""
#: src/octoprint/templates/settings.jinja2:145
msgid "Default extrusion length"
msgstr ""
#: src/octoprint/templates/settings.jinja2:151
msgid "Number of Extruders"
msgstr ""
#: src/octoprint/templates/settings.jinja2:157
msgid "Extruder Offsets"
msgstr ""
#: src/octoprint/templates/settings.jinja2:174
msgid "Bed Size"
msgstr ""
#: src/octoprint/templates/settings.jinja2:188
msgid "Radius"
msgstr ""
#: src/octoprint/templates/settings.jinja2:196
msgid "Circular"
msgstr ""
#: src/octoprint/templates/settings.jinja2:205
msgid "Stream URL"
msgstr ""
#: src/octoprint/templates/settings.jinja2:211
msgid "Snapshot URL"
msgstr ""
#: src/octoprint/templates/settings.jinja2:217
msgid "Path to FFMPEG"
msgstr ""
#: src/octoprint/templates/settings.jinja2:223
msgid "Timelapse bitrate"
msgstr ""
#: src/octoprint/templates/settings.jinja2:231
msgid "Enable OctoPrint watermark in timelapse movies"
msgstr ""
#: src/octoprint/templates/settings.jinja2:238
msgid "Flip webcam horizontally"
msgstr ""
#: src/octoprint/templates/settings.jinja2:243
msgid "Flip webcam vertically"
msgstr ""
#: src/octoprint/templates/settings.jinja2:254
msgid "Enable Temperature Graph"
msgstr ""
#: src/octoprint/templates/settings.jinja2:261
msgid "Enable GCode Visualizer"
msgstr ""
#: src/octoprint/templates/settings.jinja2:268
msgid "Enable SD support"
msgstr ""
#: src/octoprint/templates/settings.jinja2:275
msgid "Always assume SD card is present"
msgstr ""
#: src/octoprint/templates/settings.jinja2:275
#: src/octoprint/templates/settings.jinja2:289
#: src/octoprint/templates/settings.jinja2:296
msgid "Repetier"
msgstr ""
#: src/octoprint/templates/settings.jinja2:282
msgid "Wait for <code>start</code> on connect"
msgstr ""
#: src/octoprint/templates/settings.jinja2:289
msgid "Send a checksum with <strong>every</strong> command"
msgstr ""
#: src/octoprint/templates/settings.jinja2:296
#, python-format
msgid ""
"Support <code>TargetExtr%%n</code>/<code>TargetBed</code> target "
"temperature format"
msgstr ""
#: src/octoprint/templates/settings.jinja2:303
msgid "Swallow the first \"ok\" after a resend response"
msgstr ""
#: src/octoprint/templates/settings.jinja2:312
msgid "Upload Folder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:318
msgid "Timelapse Folder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:324
msgid "Timelapse Temp Folder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:330
msgid "Logs Folder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:336
msgid "Watched Folder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:346
msgid "Extruder"
msgstr ""
#: src/octoprint/templates/settings.jinja2:378
msgid "RegExp"
msgstr ""
#: src/octoprint/templates/settings.jinja2:403
msgid "Title"
msgstr ""
#: src/octoprint/templates/settings.jinja2:409
msgid "Color"
msgstr ""
#: src/octoprint/templates/settings.jinja2:420
msgid "Enable slicing via Cura"
msgstr ""
#: src/octoprint/templates/settings.jinja2:426
msgid "Path to Cura"
msgstr ""
#: src/octoprint/templates/settings.jinja2:432
msgid "Path to Cura config"
msgstr ""
#: src/octoprint/templates/settings.jinja2:444
msgid "Enable"
msgstr ""
#: src/octoprint/templates/settings.jinja2:451
#, python-format
msgid "Allow <a href=\"%(url)s\">Cross Origin Resource Sharing (CORS)</a>"
msgstr ""
#: src/octoprint/templates/settings.jinja2:456
#: src/octoprint/templates/settings.jinja2:477
msgid "API Key"
msgstr ""
#: src/octoprint/templates/settings.jinja2:470
#: src/octoprint/templates/settings.jinja2:531
#: src/octoprint/templates/settings.jinja2:560
msgid "Active"
msgstr ""
#: src/octoprint/templates/settings.jinja2:471
#: src/octoprint/templates/settings.jinja2:538
#: src/octoprint/templates/settings.jinja2:567
msgid "Admin"
msgstr ""
#: src/octoprint/templates/settings.jinja2:481
msgid "Update User"
msgstr ""
#: src/octoprint/templates/settings.jinja2:481
msgid "Change password"
msgstr ""
#: src/octoprint/templates/settings.jinja2:481
msgid "Delete user"
msgstr ""
#: src/octoprint/templates/settings.jinja2:498
#: src/octoprint/templates/settings.jinja2:505
msgid "Add user"
msgstr ""
#: src/octoprint/templates/settings.jinja2:522
#: src/octoprint/templates/settings.jinja2:593
msgid "Repeat Password"
msgstr ""
#: src/octoprint/templates/settings.jinja2:545
#: src/octoprint/templates/settings.jinja2:574
#: src/octoprint/templates/settings.jinja2:616
msgid "Abort"
msgstr ""
#: src/octoprint/templates/settings.jinja2:546
#: src/octoprint/templates/settings.jinja2:575
#: src/octoprint/templates/settings.jinja2:617
msgid "Confirm"
msgstr ""
#: src/octoprint/templates/settings.jinja2:553
#, python-format
msgid "Edit user \"%(user)s\""
msgstr ""
#: src/octoprint/templates/settings.jinja2:582
#, python-format
msgid "Change password for user \"%(user)s\""
msgstr ""
#: src/octoprint/templates/settings.jinja2:587
msgid "New Password"
msgstr ""
#: src/octoprint/templates/settings.jinja2:602
msgid "Current API Key"
msgstr ""
#: src/octoprint/templates/settings.jinja2:605
msgid "N/A"
msgstr ""
#: src/octoprint/templates/settings.jinja2:630
msgid "Modification date"
msgstr ""
#: src/octoprint/templates/settings.jinja2:638
msgid "Date"
msgstr ""
#: src/octoprint/templates/settings.jinja2:677
msgid "Save"
msgstr ""
Reference in a new issue Copy permalink