MrDraw/printer_webui/util/README

The code in this sub package mostly originates from the Cura project (https://github.com/daid/Cura). It has been
slightly reorganized and adapted. The mapping to the original Cura source is the following:

* avr_isp.* => Cura.avr_isp.*
* comm => Cura.util.machineCom
* gcodeInterpreter => Cura.util.gcodeInterpreter
* util3d => Cura.util.util3d
Established settings mechanism Allows reading and writing default serial port and baudrate (this also is available via the web interface) and setting the host and port on which the server should listen. Might allow persisting more options in the future. The configuration file is stored in ~/.printerwebui/config.ini under Linux, in %APPDATA%/PrinterWebUI/config.ini under Windows and should be stored in ~/Library/Application Support/config.ini under MacOS X Closes #1 2013-01-01 20:04:00 +00:00			`The code in this sub package mostly originates from the Cura project (https://github.com/daid/Cura). It has been`
			`slightly reorganized and adapted. The mapping to the original Cura source is the following:`
Major reorganization to only include the communication stack from Cura. 2012-12-31 12:18:54 +00:00
			`* avr_isp.* => Cura.avr_isp.*`
			`* comm => Cura.util.machineCom`
			`* gcodeInterpreter => Cura.util.gcodeInterpreter`
Established settings mechanism Allows reading and writing default serial port and baudrate (this also is available via the web interface) and setting the host and port on which the server should listen. Might allow persisting more options in the future. The configuration file is stored in ~/.printerwebui/config.ini under Linux, in %APPDATA%/PrinterWebUI/config.ini under Windows and should be stored in ~/Library/Application Support/config.ini under MacOS X Closes #1 2013-01-01 20:04:00 +00:00			`* util3d => Cura.util.util3d`