pingu_98/MrDraw
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Added defaults for swap_xz and swap_yz

Browse source
This commit is contained in:
daid 2012-04-06 15:15:41 +02:00
parent bcf7466f9d
commit 1ded2a5c18
2 changed files with 4 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
Cura/gui/mainWindow.py
View file

@ -96,7 +96,7 @@ class mainWindow(configBase.configWindowBase):
configBase.TitleRow(left, "Accuracy")
c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
validators.validFloat(c, 0.0)
validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80 / 100), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
validators.validFloat(c, 0.0)
validators.wallThicknessValidator(c)
@ -174,6 +174,7 @@ class mainWindow(configBase.configWindowBase):
configBase.TitleRow(right, "Accuracy")
c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
validators.validFloat(c, 0.0)
validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
nb.AddPage(alterationPanel.alterationPanel(nb), "Start/End-GCode")

2
Cura/util/profile.py
View file

@ -42,6 +42,8 @@ profileDefaultSettings = {
'flip_x': 'False',
'flip_y': 'False',
'flip_z': 'False',
'swap_xz': 'False',
'swap_yz': 'False',
'model_rotate_base': '0',
'model_multiply_x': '1',
'model_multiply_y': '1',