pingu_98/MrDraw
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Preparing release of 1.3.6

Browse source
This commit is contained in:
Gina Häußge 2017-12-12 10:34:58 +01:00
parent 8229842334
commit 793bb714eb
3 changed files with 27 additions and 30 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

42
CHANGELOG.md
View file

@ -1,30 +1,14 @@
# OctoPrint Changelog
## 1.3.6rc3 (2017-12-08)
## 1.3.6 (2017-12-12)
### Improvements
### Note for upgraders and plugin authors: Change in the bundling of JS assets can lead to issues in plugins
* Fetch plugin blacklist (and also announcements, plugin notices and plugin repository) via https instead of http.
A change to solve issues with plugins bundling JS assets that cause interference with other plugins (e.g. through the declaration of `"use strict"`) and in general to add better isolation and error handling might cause errors for some plugins that go beyond your run-off-the-mill view model and also implicitly declare new globals.
### Bug fixes
If you happen to run into any such issues, you can switch back to the old way of bundling JS assets via the newly introduced "Settings > Feature > Enable legacy plugin asset bundling" toggle (check it, save the settings, restart the server). This is provided to allow for a minimally invasive adjustment period until affected plugins have been updated.
* Fixed an issue causing redundant software update configuration settings to be written to `config.yaml`, in turn causing issues when downgrading to <1.3.5
* Fixed an issue detecting whether the installed version is a release version or a development version.
([Commits](https://github.com/foosel/OctoPrint/compare/1.3.6rc2...1.3.6rc3))
## 1.3.6rc2 (2017-12-05)
### Bug fixes
* [#2262](https://github.com/foosel/OctoPrint/issues/2262) - Fixed a bug causing `Error:checksum mismatch, Last Line: ...` errors from the firmware to be handled incorrectly.
* [#2267](https://github.com/foosel/OctoPrint/issues/2267) - Fixed a bug causing the GCODE viewer to not get properly initialized due to a JS error on load if "Also show next layer" was selected.
* [#2268](https://github.com/foosel/OctoPrint/issues/2268) - Fixed a bug causing a display error with the temperature offsets. If one offset was changed, all others seemed to revert back to 0.
* Fixed ordering of plugin assets, should be alphabetical based on the plugin identifier.
([Commits](https://github.com/foosel/OctoPrint/compare/1.3.6rc1...1.3.6rc2))
## 1.3.6rc1 (2017-12-01)
You can find out more about the change, how to know if a plugin is even affected and what do about it [on the OctoBlog](https://octoprint.org/blog/2017/12/01/heads-up-plugin-authors/).
### Improvements
@ -83,6 +67,7 @@
* Docs: Added information on how to run the test suite.
* Various refactorings
* Various documentation updates
* Fetch plugin blacklist (and also announcements, plugin notices and plugin repository) via https instead of http.
### Bug fixes
@ -105,6 +90,9 @@
* [#2226](https://github.com/foosel/OctoPrint/issues/2226) - Handle `No Line Number with checksum, Last Line: ...` errors from the firmware.
* [#2233](https://github.com/foosel/OctoPrint/pull/2233) - Respond with `411 Length Required` when content length is missing on file uploads.
* [#2242](https://github.com/foosel/OctoPrint/issues/2242) - Fixed an issue where print time left could show "1 days" instead of "1 day".
* [#2262](https://github.com/foosel/OctoPrint/issues/2262) (regression) - Fixed a bug causing `Error:checksum mismatch, Last Line: ...` errors from the firmware to be handled incorrectly.
* [#2267](https://github.com/foosel/OctoPrint/issues/2267) (regression) - Fixed a bug causing the GCODE viewer to not get properly initialized due to a JS error on load if "Also show next layer" was selected.
* [#2268](https://github.com/foosel/OctoPrint/issues/2268) (regression) - Fixed a bug causing a display error with the temperature offsets. If one offset was changed, all others seemed to revert back to 0.
* Fixed cleanup of unrendered timelapses with certain names.
* Fixed a caching issue with the file list API and the slicing API.
* Fixed initial sizing of the temperature graph.
@ -122,8 +110,18 @@
* Virtual printer: Fix resend simuation.
* Docs: Fixed CSS of line numbered listings.
* Docs: Updated mermaid to fix a deprecation warning.
* Fixed ordering of plugin assets, should be alphabetical based on the plugin identifier. (regression)
* Fixed an issue causing redundant software update configuration settings to be written to `config.yaml`, in turn causing issues when downgrading to <1.3.5. (regression)
* Fixed an issue detecting whether the installed version is a release version or a development version. (regression)
([Commits](https://github.com/foosel/OctoPrint/compare/1.3.5...1.3.6rc1))
### More Information
* [Commits](https://github.com/foosel/OctoPrint/compare/1.3.5...1.3.6)
* Release Candidates:
* [1.3.5rc1](https://github.com/foosel/OctoPrint/releases/tag/1.3.6rc1)
* [1.3.5rc2](https://github.com/foosel/OctoPrint/releases/tag/1.3.6rc2)
* [1.3.5rc3](https://github.com/foosel/OctoPrint/releases/tag/1.3.6rc3)
* A special **Thank you!** to everyone who reported back on these release candidates this time: [andrivet](https://github.com/andrivet), [b-morgan](https://github.com/b-morgan), [bjarchi](https://github.com/bjarchi), [chippypilot](https://github.com/chippypilot), [ChrisHeerschap](https://github.com/ChrisHeerschap), [cosmith71](https://github.com/cosmith71), [Crowlord](https://github.com/Crowlord), [ctgreybeard](https://github.com/ctgreybeard), [fiveangle](https://github.com/fiveangle), [goeland86](https://github.com/goeland86), [jbjones27](https://github.com/jbjones27), [jneilliii](https://github.com/jneilliii), [JohnOCFII](https://github.com/JohnOCFII), [Kunsi](https://github.com/Kunsi), [Lordxv](https://github.com/Lordxv), [malnvenshorn](https://github.com/malnvenshorn), [mcp5500](https://github.com/mcp5500), [ntoff](https://github.com/ntoff), [ripp2003](https://github.com/ripp2003) and [schorsch3000](https://github.com/schorsch3000)
## 1.3.5 (2017-10-16)

10
README.md
View file

@ -5,14 +5,14 @@
OctoPrint provides a snappy web interface for controlling consumer 3D printers. It is Free Software
and released under the [GNU Affero General Public License V3](http://www.gnu.org/licenses/agpl.html).
Its website can be found at [octoprint.org](http://octoprint.org).
Its website can be found at [octoprint.org](https://octoprint.org/?utm_source=github&utm_medium=readme).
The documentation is located at [docs.octoprint.org](http://docs.octoprint.org).
The official plugin repository can be reached at [plugins.octoprint.org](http://plugins.octoprint.org).
The official plugin repository can be reached at [plugins.octoprint.org](https://plugins.octoprint.org/?utm_source=github&utm_medium=readme).
OctoPrint's development wouldn't be possible without the [financial support by its community](http://octoprint.org/support-octoprint/).
If you enjoy OctoPrint, please consider becoming a regular supporter!
**OctoPrint's development wouldn't be possible without the [financial support by its community](https://octoprint.org/support-octoprint/?utm_source=github&utm_medium=readme).
If you enjoy OctoPrint, please consider becoming a regular supporter!**
![Screenshot](http://i.imgur.com/dF3noFp.png)
@ -29,7 +29,7 @@ Contributions of all kinds are welcome, not only in the form of code but also wi
[official documentation](http://docs.octoprint.org/) or [the public wiki](https://github.com/foosel/OctoPrint/wiki), support
of other users in the [bug tracker](https://github.com/foosel/OctoPrint/issues),
[the Mailinglist](https://groups.google.com/group/octoprint) or
[the G+ Community](https://plus.google.com/communities/102771308349328485741) and also [financially](http://octoprint.org/support-octoprint/).
[the G+ Community](https://plus.google.com/communities/102771308349328485741) and also [financially](https://octoprint.org/support-octoprint/?utm_source=github&utm_medium=readme).
If you think something is bad about OctoPrint or its documentation the way it is, please help
in any way to make it better instead of just complaining about it -- this is an Open Source Project

5
SUPPORTERS.md
View file

@ -36,7 +36,6 @@ thanks to everyone who contributed!
* Kazuhiro Ogura
* Makespace Madrid
* Marcus Ackermann
* Mark Qvist
* Mark Walker
* Michael Aumock
* Miles Flavel
@ -46,7 +45,7 @@ thanks to everyone who contributed!
* Patrick McGinnis
* Peter Schmehl
* PRINT3Dforum.com
* Robert Gusek
* Randy C. Will
* Roger Strolz
* Roy Cortes
* Samer Najia
@ -59,4 +58,4 @@ thanks to everyone who contributed!
* Timeshell.ca
* Trent Shumay
and 1143 more wonderful people pledging on the [Patreon campaign](https://patreon.com/foosel)!
and 1062 more wonderful people pledging on the [Patreon campaign](https://patreon.com/foosel)!