diff --git a/src/octoprint/plugins/svgtogcode/templates/override_index.jinja2 b/src/octoprint/plugins/svgtogcode/templates/override_index.jinja2 deleted file mode 100644 index 94ef18e6..00000000 --- a/src/octoprint/plugins/svgtogcode/templates/override_index.jinja2 +++ /dev/null @@ -1,649 +0,0 @@ - - - - Mr Beam - - - - - - {% include 'stylesheets.jinja2' %} - {% include 'initscript.jinja2' %} - - -
- - -
-
-
-
-
-
- -
-
- {{ _('State') }} -
-
- -
-
- Mr Beam is in a locked state as it does not know its position. - First remove any objects blocking the gantry's travel range. - Then do a homing cycle. -
- -
- - -
-
-
-
- {{ _('Position') }}: - - -
-
- -
- XY-Axes -
- -
-
- - - -
-
- -
-
-
-
- Z-Axis -
- - - -
-
-
- -
-
- -
- - Jog distance: 10mm -
- -
-
-
-
- -
-
- - - - - - - -
-
-
-
- {{ _('Machine State') }}:
- -
- - - {{ _('Approx. Total Job Time') }}:
-
-
{{ _('Processed') }} :
-
- - - - -
-
-
-
- -
- -
- - - -
- -
-
-
-
-
- - - - - - - -
-
-
- - - -
- - - -
- - - - - add designs via - the design library - or drag 'n' drop - - - - - - - -
-
-
-
-
- -
-
-
-
-
- {{ _('Terminal filters') }} -
-
- -
- -
- -
-
- {{ _('GCode reference') }} -
-
-
-
    -
  • - G0: - rapid position move -
    parameters: X,Y
    -
    example: G0 X100 Y0
    -
    • -
  • - F: - set feedrate for G1,G2,G3 -
    parameters: value
    -
    example: F300
    -
    • -
  • - G1: - work move, line -
    parameters: X,Y,F
    -
    example: G1 X100 Y0 F800
    -
    • -
  • - G2: - work move, arc clockwise -
    parameters: X,Y,I,J,F
    -
    example: G2 X10 Y10 I8 J5
    -
    • -
  • - G3: - work move, arc counterclockwise -
    parameters: X,Y,I,J,F
    -
    example: G3 X10 Y10 I8 J5
    -
    • -
  • - G4: - dwell -
    parameters: P
    -
    example: G4 P0.5
    -
    • -
  • - M3: - laser on -
    parameters: S
    -
    example: M3 S10
    -
    • -
  • - M5: - laser off -
    parameters: -
    -
    example: M5
    -
    • -
  • - M8: - fan on -
    parameters: -
    -
    example: M8
    -
    • -
  • - M9: - fan off -
    parameters: -
    -
    example: M9
    -
    • -
  • - M2: - machine off -
    parameters: -
    -
    example: M2
    -
    • -
  • - G90: - absolute coordinate mode -
    parameters: -
    -
    example: G90
    -
    • -
  • - G91: - relative coordinate mode -
    parameters: -
    -
    example: G91
    -
    • -
  • - G92: - set coordinate origin -
    parameters: X,Y
    -
    example: G92 X0 Y0
    -
    • -
  • - G20: - set units to inches -
    parameters: -
    -
    example: G20
    -
    • -
  • - G21: - set units to millimeters -
    parameters: -
    -
    example: G21
    -
    • -
-
-
-
- - 

-								
-							

-
-						

-					

-				

-				
-				

-					

-						

-							

-								
    
-									
  1. Add designs to your working area with the -button
    2. 
-									
  2. Afterwards switch back to the working area
    3. 
-									
-								

-								

-									

-										 {{ _('Files') }}
-										
-										
-									

-
-									
-									
-									

-										{{ _('Free') }}: 
-									

-									

-										

-
-											
-												
-												{{ _('Upload') }}
-												
-											
-										

-										

-											

-										

-										

-											{{ _('Hint: You can also drag and drop files on this page to upload them.') }}
-										

-									

-								

-							

-							

-								

-									

-				
-										

-											

-								
-												

-													

-												

-
-													
-
-													
-
-													
-												
-											

-										

-									
 
-								

-							

-						

-					

-				

-				
-				

-					

-						

-							

-								
    
-									
  • 1. Place your material on the working area
    • 
-									
  • 2. Move the laser over the material
    • 
-									
  • 3. Put on your safety glasses
    • 
-									
  • 4. Turn the laser safety switch to on
    • 
-									
  • → Now enable the focus mode
    • 
-									
  • 5. Adjust the focus until the laser beam is as small as possible
    • 
-									
  • → Disable the focus mode. 
    • 
-								

-								

-								

-									
-									
-								

-								

-
-								

-									

-
-										Z-Axis
-										

-											
-											
-										

-									

-								

-
-							

-							

-								
 
-								

-							

-						

-					

-				

-				
-				

-					

-						

-							{% include 'tabs/gcodeviewer.jinja2' %}
-
-						

-					

-				

-				
-				

-					

-						

-
-							

-								{% include 'dialogs/settings.jinja2' %}
-							

-
-						

-					

-				

-				
-			

-
-
-					

-					
-
-					
-					
-						
-					

-
-
-
-					
-					{%  if templatePlugins %}
-					{% for plugin_name in templatePlugins %}
-					{% include plugin_name+".jinja2" ignore missing %}
-					{% endfor %}
-					{% endif %}
-					
-
-
-					 
-        {% include 'dialogs/confirmation.jinja2' %}
-        {% include 'dialogs/firstrun.jinja2' %}
-        {#% include 'dialogs/settings.jinja2' %#}
-        {% include 'dialogs/slicing.jinja2' %}
-        
-
-        
-        {% include 'overlays/dragndrop.jinja2' %}
-        {% include 'overlays/offline.jinja2' %}
-        
-
-        
-        {% for data in genericEntries %}
-            {% include data.template ignore missing %}
-        {% endfor %}
-        
-
-        {% include 'javascripts.jinja2' %}
-	
-
diff --git a/src/octoprint/printer/standard.py b/src/octoprint/printer/standard.py
index 27b64931..a12abb69 100644
--- a/src/octoprint/printer/standard.py
+++ b/src/octoprint/printer/standard.py
@@ -875,394 +875,6 @@ class Printer(PrinterInterface, comm.MachineComPrintCallback):
 		self._stateMonitor.setWorkPosition(WPosString)
 		self._stateMonitor.setMachinePosition(MPosString)
 		
-		
-		
-	#<<<<<<< HEAD
-
-
-#
-#
-#	def home(self, axes):
-#		if(settings().getBoolean(["feature", "grbl"])):
-#			self.commands(["$H", "G92X0Y0Z0", "G90", "G21"])
-#		else:
-#			self.commands(["G91", "G28 %s" % " ".join(map(lambda x: "%s0" % x.upper(), axes)), "G90"])
-#
-#	def extrude(self, amount):
-#		printer_profile = self._printerProfileManager.get_current_or_default()
-#		extrusion_speed = printer_profile["axes"]["e"]["speed"]
-#		self.commands(["G91", "G1 E%s F%d" % (amount, extrusion_speed), "G90"])
-#
-#	def changeTool(self, tool):
-#		try:
-#			toolNum = int(tool[len("tool"):])
-#			self.command("T%d" % toolNum)
-#		except ValueError:
-#			pass
-#
-#	def setTemperature(self, type, value):
-#		if type.startswith("tool"):
-#			printer_profile = self._printerProfileManager.get_current_or_default()
-#			extruder_count = printer_profile["extruder"]["count"]
-#			if extruder_count > 1:
-#				try:
-#					toolNum = int(type[len("tool"):])
-#					self.command("M104 T%d S%f" % (toolNum, value))
-#				except ValueError:
-#					pass
-#			else:
-#				self.command("M104 S%f" % value)
-#		elif type == "bed":
-#			self.command("M140 S%f" % value)
-#
-#	def setTemperatureOffset(self, offsets={}):
-#		if self._comm is None:
-#			return
-#
-#		tool, bed = self._comm.getOffsets()
-#
-#		validatedOffsets = {}
-#
-#		for key in offsets:
-#			value = offsets[key]
-#			if key == "bed":
-#				bed = value
-#				validatedOffsets[key] = value
-#			elif key.startswith("tool"):
-#				try:
-#					toolNum = int(key[len("tool"):])
-#					tool[toolNum] = value
-#					validatedOffsets[key] = value
-#				except ValueError:
-#					pass
-#
-#		self._comm.setTemperatureOffset(tool, bed)
-#		self._stateMonitor.setTempOffsets(validatedOffsets)
-#
-#	def selectFile(self, filename, sd, printAfterSelect=False):
-#		if self._comm is None or (self._comm.isBusy() or self._comm.isStreaming()):
-#			self._logger.info("Cannot load file: printer not connected or currently busy")
-#			return
-#
-#		self._printAfterSelect = printAfterSelect
-#		self._comm.selectFile(filename, sd)
-#		self._setProgressData(0, None, None, None)
-#		self._setCurrentZ(None)
-#
-#	def unselectFile(self):
-#		if self._comm is not None and (self._comm.isBusy() or self._comm.isStreaming()):
-#			return
-#
-#		self._comm.unselectFile()
-#		self._setProgressData(0, None, None, None)
-#		self._setCurrentZ(None)
-#
-#	def startPrint(self):
-#		"""
-#		 Starts the currently loaded print job.
-#		 Only starts if the printer is connected and operational, not currently printing and a printjob is loaded
-#		"""
-#		if self._comm is None or not self._comm.isOperational() or self._comm.isPrinting():
-#			return
-#		if self._selectedFile is None:
-#			return
-#
-#		self._timeEstimationData = TimeEstimationHelper()
-#		self._lastProgressReport = None
-#		self._setCurrentZ(None)
-#		self._comm.startPrint()
-#		self._addPositionData(None, None)
-#
-
-#
-#	def togglePausePrint(self):
-#		"""
-#		 Pause the current printjob.
-#		"""
-#		if self._comm is None:
-#			return
-#
-#		self._comm.setPause(not self._comm.isPaused())
-#
-#	def cancelPrint(self, disableMotorsAndHeater=True):
-#		"""
-#		 Cancel the current printjob.
-#		"""
-#		if self._comm is None:
-#			return
-#
-#		self._comm.cancelPrint()
-#
-#		if disableMotorsAndHeater:
-#			printer_profile = self._printerProfileManager.get_current_or_default()
-#			extruder_count = printer_profile["extruder"]["count"]
-#
-#			# disable motors, switch off hotends, bed and fan
-#			#commands = ["M84"]
-#			#commands.extend(map(lambda x: "M104 T%d S0" % x, range(extruder_count)))
-#			#commands.extend(["M140 S0", "M106 S0"])
-#			commands = ["M05", "G0X0Y0", "M09"]
-#			self.commands(commands)
-#
-#		# reset progress, height, print time
-#		self._setCurrentZ(None)
-#		self._setProgressData(None, None, None, None)
-#
-#		# mark print as failure
-#		if self._selectedFile is not None:
-#			self._fileManager.log_print(FileDestinations.SDCARD if self._selectedFile["sd"] else FileDestinations.LOCAL, self._selectedFile["filename"], time.time(), self._comm.getPrintTime(), False, self._printerProfileManager.get_current_or_default()["id"])
-#			payload = {
-#				"file": self._selectedFile["filename"],
-#				"origin": FileDestinations.LOCAL
-#			}
-#			if self._selectedFile["sd"]:
-#				payload["origin"] = FileDestinations.SDCARD
-#			eventManager().fire(Events.PRINT_FAILED, payload)
-#
-#	#~~ state monitoring
-#
-#	def _setCurrentZ(self, currentZ):
-#		self._currentZ = currentZ
-#		self._stateMonitor.setCurrentZ(self._currentZ)
-#
-#	def _setState(self, state):
-#		self._state = state
-#		self._stateMonitor.setState({"text": self.getStateString(), "flags": self._getStateFlags()})
-#
-#	def _addLog(self, log):
-#		self._log.append(log)
-#		self._stateMonitor.addLog(log)
-#
-#	def _addMessage(self, message):
-#		self._messages.append(message)
-#		self._stateMonitor.addMessage(message)
-#
-#	def _estimateTotalPrintTime(self, progress, printTime):
-#		if not progress or not printTime or not self._timeEstimationData:
-#			#self._estimationLogger.info("{progress};{printTime};;;;".format(**locals()))
-#			return None
-#
-#		else:
-#			newEstimate = printTime / progress
-#			self._timeEstimationData.update(newEstimate)
-#
-#			result = None
-#			if self._timeEstimationData.is_stable():
-#				result = self._timeEstimationData.average_total_rolling
-#
-#			#averageTotal = self._timeEstimationData.average_total
-#			#averageTotalRolling = self._timeEstimationData.average_total_rolling
-#			#averageDistance = self._timeEstimationData.average_distance
-#
-#			#self._estimationLogger.info("{progress};{printTime};{newEstimate};{averageTotal};{averageTotalRolling};{averageDistance}".format(**locals()))
-#
-#			return result
-#
-#	def _setProgressData(self, progress, filepos, printTime, cleanedPrintTime):
-#		estimatedTotalPrintTime = self._estimateTotalPrintTime(progress, cleanedPrintTime)
-#		statisticalTotalPrintTime = None
-#		totalPrintTime = estimatedTotalPrintTime
-#
-#		if self._selectedFile and "estimatedPrintTime" in self._selectedFile and self._selectedFile["estimatedPrintTime"]:
-#			statisticalTotalPrintTime = self._selectedFile["estimatedPrintTime"]
-#			if progress and cleanedPrintTime:
-#				if estimatedTotalPrintTime is None:
-#					totalPrintTime = statisticalTotalPrintTime
-#				else:
-#					if progress < 0.5:
-#						sub_progress = progress * 2
-#					else:
-#						sub_progress = 1.0
-#					totalPrintTime = (1 - sub_progress) * statisticalTotalPrintTime + sub_progress * estimatedTotalPrintTime
-#
-#		#self._printTimeLogger.info("{progress};{cleanedPrintTime};{estimatedTotalPrintTime};{statisticalTotalPrintTime};{totalPrintTime}".format(**locals()))
-#
-#		self._progress = progress
-#		self._printTime = printTime
-#		self._printTimeLeft = totalPrintTime - cleanedPrintTime if (totalPrintTime is not None and cleanedPrintTime is not None) else None
-#
-#		self._stateMonitor.setProgress({
-#			"completion": self._progress * 100 if self._progress is not None else None,
-#			"filepos": filepos,
-#			"printTime": int(self._printTime) if self._printTime is not None else None,
-#			"printTimeLeft": int(self._printTimeLeft) if self._printTimeLeft is not None else None
-#		})
-#
-#		if progress:
-#			progress_int = int(progress * 100)
-#			if self._lastProgressReport != progress_int:
-#				self._lastProgressReport = progress_int
-#				self._reportPrintProgressToPlugins(progress_int)
-#
-#
-#	def _addTemperatureData(self, temp, bedTemp):
-#		currentTimeUtc = int(time.time())
-#
-#		data = {
-#			"time": currentTimeUtc
-#		}
-#		for tool in temp.keys():
-#			data["tool%d" % tool] = {
-#				"actual": temp[tool][0],
-#				"target": temp[tool][1]
-#			}
-#		if bedTemp is not None and isinstance(bedTemp, tuple):
-#			data["bed"] = {
-#				"actual": bedTemp[0],
-#				"target": bedTemp[1]
-#			}
-#
-#		self._temps.append(data)
-#
-#		self._temp = temp
-#		self._bedTemp = bedTemp
-#
-#		self._stateMonitor.addTemperature(data)
-#
-#	def _setJobData(self, filename, filesize, sd):
-#		if filename is not None:
-#			self._selectedFile = {
-#				"filename": filename,
-#				"filesize": filesize,
-#				"sd": sd,
-#				"estimatedPrintTime": None
-#			}
-#		else:
-#			self._selectedFile = None
-#			self._stateMonitor.setJobData({
-#				"file": {
-#					"name": None,
-#					"origin": None,
-#					"size": None,
-#					"date": None
-#				},
-#				"estimatedPrintTime": None,
-#				"averagePrintTime": None,
-#				"lastPrintTime": None,
-#				"filament": None,
-#			})
-#			return
-#
-#		estimatedPrintTime = None
-#		lastPrintTime = None
-#		averagePrintTime = None
-#		date = None
-#		filament = None
-#		if filename:
-#			# Use a string for mtime because it could be float and the
-#			# javascript needs to exact match
-#			if not sd:
-#				date = int(os.stat(filename).st_ctime)
-#
-#			try:
-#				fileData = self._fileManager.get_metadata(FileDestinations.SDCARD if sd else FileDestinations.LOCAL, filename)
-#			except:
-#				fileData = None
-#			if fileData is not None:
-#				if "analysis" in fileData:
-#					if estimatedPrintTime is None and "estimatedPrintTime" in fileData["analysis"]:
-#						estimatedPrintTime = fileData["analysis"]["estimatedPrintTime"]
-#					if "filament" in fileData["analysis"].keys():
-#						filament = fileData["analysis"]["filament"]
-#				if "statistics" in fileData:
-#					printer_profile = self._printerProfileManager.get_current_or_default()["id"]
-#					if "averagePrintTime" in fileData["statistics"] and printer_profile in fileData["statistics"]["averagePrintTime"]:
-#						averagePrintTime = fileData["statistics"]["averagePrintTime"][printer_profile]
-#					if "lastPrintTime" in fileData["statistics"] and printer_profile in fileData["statistics"]["lastPrintTime"]:
-#						lastPrintTime = fileData["statistics"]["lastPrintTime"][printer_profile]
-#
-#				if averagePrintTime is not None:
-#					self._selectedFile["estimatedPrintTime"] = averagePrintTime
-#				elif estimatedPrintTime is not None:
-#					# TODO apply factor which first needs to be tracked!
-#					self._selectedFile["estimatedPrintTime"] = estimatedPrintTime
-#
-#		self._stateMonitor.setJobData({
-#			"file": {
-#				"name": os.path.basename(filename) if filename is not None else None,
-#				"origin": FileDestinations.SDCARD if sd else FileDestinations.LOCAL,
-#				"size": filesize,
-#				"date": date
-#			},
-#			"estimatedPrintTime": estimatedPrintTime,
-#			"averagePrintTime": averagePrintTime,
-#			"lastPrintTime": lastPrintTime,
-#			"filament": filament,
-#		})
-#
-#	def _sendInitialStateUpdate(self, callback):
-#		try:
-#			data = self._stateMonitor.getCurrentData()
-#			data.update({
-#				"temps": list(self._temps),
-#				"logs": list(self._log),
-#				"messages": list(self._messages)
-#			})
-#			callback.sendHistoryData(data)
-#		except Exception, err:
-#			import sys
-#			sys.stderr.write("ERROR: %s\n" % str(err))
-#			pass
-#
-#	def _getStateFlags(self):
-#		return {
-#			"operational": self.isOperational(),
-#			"locked": self.isLocked(),
-#			"printing": self.isPrinting(),
-#			"closedOrError": self.isClosedOrError(),
-#			"error": self.isError(),
-#			"paused": self.isPaused(),
-#			"ready": self.isReady(),
-#			"sdReady": self.isSdReady()
-#		}
-#
-#	#~~ callbacks triggered from self._comm
-#
-#	def mcLog(self, message):
-#		"""
-#		 Callback method for the comm object, called upon log output.
-#		#"""
-#		self._addLog(message)
-#
-#	def mcTempUpdate(self, temp, bedTemp):
-#		self._addTemperatureData(temp, bedTemp)
-#
-
-#
-#	def mcStateChange(self, state):
-#		"""
-#		 Callback method for the comm object, called if the connection state changes.
-#		#"""
-#		oldState = self._state
-#
-#		# forward relevant state changes to gcode manager
-#		if self._comm is not None and oldState == self._comm.STATE_PRINTING:
-#			if self._selectedFile is not None:
-#				if state == self._comm.STATE_OPERATIONAL:
-#					self._fileManager.log_print(FileDestinations.SDCARD if self._selectedFile["sd"] else FileDestinations.LOCAL, self._selectedFile["filename"], time.time(), self._comm.getPrintTime(), True, self._printerProfileManager.get_current_or_default()["id"])
-#				elif state == self._comm.STATE_CLOSED or state == self._comm.STATE_ERROR or state == self._comm.STATE_CLOSED_WITH_ERROR:
-#					self._fileManager.log_print(FileDestinations.SDCARD if self._selectedFile["sd"] else FileDestinations.LOCAL, self._selectedFile["filename"], time.time(), self._comm.getPrintTime(), False, self._printerProfileManager.get_current_or_default()["id"])
-#			self._analysisQueue.resume() # printing done, put those cpu cycles to good use
-#		elif self._comm is not None and state == self._comm.STATE_PRINTING:
-#			self._analysisQueue.pause() # do not analyse files while printing
-#
-#		self._setState(state)
-#
-#	def mcMessage(self, message):
-#		"""
-#		 Callback method for the comm object, called upon message exchanges via serial.
-#		 Stores the message in the message buffer, truncates buffer to the last 300 lines.
-#		#"""
-#		self._addMessage(message)
-#
-#	def mcProgress(self):
-#		"""
-#		 Callback method for the comm object, called upon any change in progress of the printjob.
-#		 Triggers storage of new values for printTime, printTimeLeft and the current progress.
-#		#"""
-#
-#		self._setProgressData(self._comm.getPrintProgress(), self._comm.getPrintFilepos(), self._comm.getPrintTime(), self._comm.getCleanedPrintTime())
-#=======
 
 class StateMonitor(object):
 	def __init__(self, interval=0.5, on_update=None, on_add_temperature=None, on_add_log=None, on_add_message=None):
diff --git a/src/octoprint/static/js/app/viewmodels/terminal.js b/src/octoprint/static/js/app/viewmodels/terminal.js
index 946e905b..054115b2 100644
--- a/src/octoprint/static/js/app/viewmodels/terminal.js
+++ b/src/octoprint/static/js/app/viewmodels/terminal.js
@@ -1,9 +1,6 @@
 //<<<<<<< HEAD
 //function TerminalViewModel(loginStateViewModel, settingsViewModel) {
-//    var self = this;
-//
-//    self.loginState = loginStateViewModel;
-//    self.settings = settingsViewModel;
+
 //
 //    self.log = [];
 //
@@ -31,10 +28,7 @@
 //        self.updateOutput();
 //    });
 //
-//    self.fromCurrentData = function(data) {
-//        self._processStateData(data.state);
-//        self._processCurrentLogData(data.logs);
-//    };
+
 //
 //    self.fromHistoryData = function(data) {
 //        self._processStateData(data.state);
@@ -54,16 +48,7 @@
 //        self.updateOutput();
 //    };
 //
-//    self._processStateData = function(data) {
-//        self.isErrorOrClosed(data.flags.closedOrError);
-//        self.isOperational(data.flags.operational);
-//        self.isLocked(data.flags.locked);
-//        self.isPaused(data.flags.paused);
-//        self.isPrinting(data.flags.printing);
-//        self.isError(data.flags.error);
-//        self.isReady(data.flags.ready);
-//        self.isLoading(data.flags.loading);
-//    };
+
 //
 //    self.updateFilterRegex = function() {
 //        var filterRegexStr = self.activeFilters().join("|").trim();
@@ -93,21 +78,7 @@
 //    };
 //	
 
-//
-//    self.sendCommand = function() {
-//        var command = self.command();
-//        if (!command) {
-//            return;
-//        }
-//
-//        //var re = /^([gmt][0-9]+)(\s.*)?/;
-//        var re = /^([gmtfs][0-9]+|\$[cinhgx#$]|[?~!])(.*)?/; // grbl style
-//        var commandMatch = command.match(re);
-//        if (commandMatch != null) {
-//            command = commandMatch[1].toUpperCase() + ((commandMatch[2] !== undefined) ? commandMatch[2].toUpperCase() : "");
-//        }
-//		
-//        if (command) {
+
 //=======
 $(function() {
     function TerminalViewModel(parameters) {
@@ -264,12 +235,14 @@ $(function() {
                 return;
             }
 
-            var re = /^([gmt][0-9]+)(\s.*)?/;
+//            var re = /^([gmt][0-9]+)(\s.*)?/;
+			var re = /^([gmtfs][0-9]+|\$[cinhgx#$]|[?~!])(.*)?/; // grbl style
             var commandMatch = command.match(re);
             if (commandMatch != null) {
                 command = commandMatch[1].toUpperCase() + ((commandMatch[2] !== undefined) ? commandMatch[2] : "");
+	            command = commandMatch[1].toUpperCase() + ((commandMatch[2] !== undefined) ? commandMatch[2].toUpperCase() : "");
             }
-
+			
             if (command) {
                 $.ajax({
                     url: API_BASEURL + "printer/command",
@@ -323,19 +296,13 @@ $(function() {
 
         self.handleKeyUp = function(event) {
             if (event.keyCode == 13) {
-                self.sendCommand();
+	            self.sendCommandWithSafetyPopup();
             }
 
             // do not prevent default action
             return true;
         };
 
-//<<<<<<< HEAD
-//    self.handleKeyUp = function(event) {
-//        if (event.keyCode == 13) {
-//            self.sendCommandWithSafetyPopup();
-//        }
-//=======
         self.onAfterTabChange = function(current, previous) {
             if (current != "#term") {
                 return;
@@ -344,7 +311,6 @@ $(function() {
                 self.scrollToEnd();
             }
         };
-//>>>>>>> upstream/maintenance
 
 		self.sendCommandWithSafetyPopup = function () {
 			var command = self.command().split(' ').join('');
@@ -352,7 +318,6 @@ $(function() {
 				return;
 			}
 
-			console.log(command);
 			var parts = command.match(/^(M3|M03)(S[0-9.]+)?/i);
 			if (parts !== null) {
 
diff --git a/src/octoprint/templates/mrbeam_index.jinja2 b/src/octoprint/templates/mrbeam_index.jinja2
index 65cd06ed..c2c1b938 100644
--- a/src/octoprint/templates/mrbeam_index.jinja2
+++ b/src/octoprint/templates/mrbeam_index.jinja2
@@ -399,8 +399,7 @@
 								
 							
 							

-								
-								

+