daid303 1a20ca2abb Reset the E to 0 before retracting in switching extruders. The E values are not yet set to zero when printing support material.		2012-10-08 15:50:35 +02:00
..
__init__.py	Some cleanup and preperation for better packaging.	2012-05-31 12:05:10 +02:00
exporer.py	Added newer ultimaker firmware. Make linux version install the 115200 baud firmware by default, as PySerial for Linux does not support 250000. Added auto baudrate detection (untested).	2012-06-30 11:51:43 +02:00
gcodeInterpreter.py	Ignore M101 and M104 for #222	2012-09-28 15:09:16 +02:00
machineCom.py	Update how the printing time remaining estimate is calculated. This gives better accurate results as the first part of the print is not added in the estimate, removing the heating and startup-code from the equasion.	2012-10-04 15:01:54 +02:00
mesh.py	Remove the print message from the mesh splitter, these cause problems with the console-less version.	2012-10-08 09:31:28 +02:00
meshLoader.py	Added obj support to Cura.	2012-09-26 14:35:35 +02:00
obj.py	Added obj support to Cura.	2012-09-26 14:35:35 +02:00
profile.py	Reset the E to 0 before retracting in switching extruders. The E values are not yet set to zero when printing support material.	2012-10-08 15:50:35 +02:00
sliceRun.py	Fix the previous fix.	2012-10-01 18:23:25 +02:00
stl.py	Fix loading of ascii stl files with MacOS line-ends.	2012-10-04 12:24:43 +02:00
svg.py	Merge branch 'master' of github.com:daid/Cura	2012-06-22 05:08:14 +02:00
util3d.py	Fixed the part splitter	2012-07-27 11:02:23 +02:00
validators.py	Move the validators from gui to util, they do not have gui specific code.	2012-08-31 15:22:30 +02:00
version.py	Add VIRTUAL serial port if you have the development version.	2012-10-01 14:58:08 +02:00