77d04ceab8
Updated build script to create win32/linux/macos versions. Fixed the defaults to they work with PLA. Fixed the temperature plugin default "ON" problem. Removed all profiles except for PLA.
31 lines
1.1 KiB
Text
31 lines
1.1 KiB
Text
(start of start.txt)
|
|
M92 E926.5 (the number of extruder steps to take in 1mm of filament)
|
|
G21 (metric values)
|
|
G21
|
|
G21 (all the extra G21 commands are comments - skeinforge eats lines without a gcode)
|
|
G21
|
|
G90 (absolute positioning)
|
|
G21
|
|
G28 X0 Y0 (move X/Y to min endstops)
|
|
G28 Z0 (move Z to min endstops)
|
|
G21
|
|
G21 ( if your prints start too high, try changing the Z0.0 below )
|
|
G21 ( to Z1.0 - the number after the Z is the actual, physical )
|
|
G21 ( height of the nozzle in mm. This can take some messing around )
|
|
G21 ( with to get just right... )
|
|
G21
|
|
G92 X0 Y0 Z0 E0 (reset software position to front/left/z=0.0)
|
|
G21
|
|
G1 Z15.0 F400 (move the platform down 15mm)
|
|
G92 E0 (zero the extruded length)
|
|
G21
|
|
G1 F75 E5 (extrude 5mm of feed stock)
|
|
G1 F75 E3.5 (reverse feed stock by 1.5mm)
|
|
G92 E0 (zero the extruded length again)
|
|
G21
|
|
M1 (Clean the nozzle then press YES to continue...)
|
|
G21
|
|
G1 X100 Y100 F3500 (go to the middle of the platform)
|
|
G1 Z0.0 F400 (back to Z=0 and start the print!)
|
|
(end of start.txt)
|
|
|