d3af800217
-Python based firmware loader (not used yet) -Beginning of the first run wizard -Preferences window Also moved around a few functions, cleaned somethings up
42 lines
2.3 KiB
Python
42 lines
2.3 KiB
Python
from __future__ import absolute_import
|
|
import __init__
|
|
|
|
import wx, os, platform, types
|
|
import ConfigParser
|
|
|
|
from fabmetheus_utilities import settings
|
|
|
|
from newui import configBase
|
|
from newui import preview3d
|
|
from newui import sliceProgessPanel
|
|
from newui import alterationPanel
|
|
from newui import validators
|
|
|
|
class advancedConfigWindow(configBase.configWindowBase):
|
|
"Advanced configuration window"
|
|
def __init__(self):
|
|
super(advancedConfigWindow, self).__init__(title='Advanced config')
|
|
|
|
wx.EVT_CLOSE(self, self.OnClose)
|
|
|
|
left, right, main = self.CreateConfigPanel(self)
|
|
|
|
configBase.TitleRow(left, "Accuracy")
|
|
c = configBase.SettingRow(left, "Extra Wall thickness for bottom/top (mm)", 'extra_base_wall_thickness', '0.0', 'Additional wall thickness of the bottom and top layers.')
|
|
validators.validFloat(c, 0.0)
|
|
configBase.TitleRow(left, "Sequence")
|
|
c = configBase.SettingRow(left, "Print order sequence", 'sequence', ['Loops > Perimeter > Infill', 'Loops > Infill > Perimeter', 'Infill > Loops > Perimeter', 'Infill > Perimeter > Loops', 'Perimeter > Infill > Loops', 'Perimeter > Loops > Infill'], 'Sequence of printing. The perimeter is the outer print edge, the loops are the insides of the walls, and the infill is the insides.');
|
|
c = configBase.SettingRow(left, "Force first layer sequence", 'force_first_layer_sequence', ['True', 'False'], 'This setting forces the order of the first layer to be \'Perimeter > Loops > Infill\'')
|
|
|
|
configBase.TitleRow(left, "Infill")
|
|
c = configBase.SettingRow(left, "Infill pattern", 'infill_type', ['Line', 'Grid Circular', 'Grid Hexagonal', 'Grid Rectangular'], 'Pattern of the none-solid infill. Line is default, but grids can provide a strong print.')
|
|
c = configBase.SettingRow(left, "Solid infill top", 'solid_top', ['True', 'False'], 'Create a solid top surface, if set to false the top is filled with the fill percentage. Useful for cups/vases.')
|
|
|
|
configBase.TitleRow(left, "Joris")
|
|
c = configBase.SettingRow(left, "Joris the outer edge", 'joris', ['False', 'True'], '[Joris] is a code name for smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. It is intended to be used with a single walled wall thickness to make cups/vases.')
|
|
|
|
main.Fit()
|
|
self.Fit()
|
|
|
|
def OnClose(self, e):
|
|
self.Destroy()
|