pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Changed configuration values to better ones, according to my experience, which should also help avoid missing steps

Browse source
This commit is contained in:
Emanuele Caruso 2011-05-23 20:03:47 +02:00
parent 006407585e
commit 1139131f72
1 changed files with 5 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Tonokip_Firmware/configuration.h
View file

@ -27,8 +27,8 @@
//Acceleration settings
#ifdef RAMP_ACCELERATION
//X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
float max_start_speed_units_per_second[] = {35.0,35.0,0.2,10.0};
long max_acceleration_units_per_sq_second[] = {750,750,50,4000}; // X, Y, Z and E max acceleration in mm/s^2 for printing moves or retracts
float max_start_speed_units_per_second[] = {25.0,25.0,0.2,10.0};
long max_acceleration_units_per_sq_second[] = {3000,3000,50,10000}; // X, Y, Z and E max acceleration in mm/s^2 for printing moves or retracts
long max_travel_acceleration_units_per_sq_second[] = {1500,1500,50}; // X, Y, Z max acceleration in mm/s^2 for travel moves
#endif
#ifdef EXP_ACCELERATION
@ -54,10 +54,10 @@ float min_constant_speed_units = 2; // the minimum units of an accelerated move
#endif
//How often should the heater check for new temp readings, in milliseconds
#define HEATER_CHECK_INTERVAL 50
#define HEATER_CHECK_INTERVAL 500
#define BED_CHECK_INTERVAL 5000
//Uncomment the following line to disable heat management during acceleration
//#define DISABLE_CHECK_DURING_ACC
//Comment the following line to enable heat management during acceleration
#define DISABLE_CHECK_DURING_ACC
#ifndef DISABLE_CHECK_DURING_ACC
//Uncomment the following line to disable heat management during the move
//#define DISABLE_CHECK_DURING_MOVE