pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Time for move is now correctly calculated in the XYZ space. Fixed a safety bug that caused heating management not to be performed in case DISABLE_CHECK_DURING_MOVE was enabled. Fixed a bug in the moving axis start speed checking.

Browse source
This commit is contained in:
Emanuele Caruso 2011-05-22 19:52:00 +02:00
parent a89f443eb2
commit 1bbdc19706
2 changed files with 147 additions and 187 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

328
Tonokip_Firmware/Tonokip_Firmware.pde
View file

@ -57,11 +57,12 @@
//Stepper Movement Variables
bool direction_x, direction_y, direction_z, direction_e;
char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
bool move_direction[NUM_AXIS];
const int STEP_PIN[NUM_AXIS] = {X_STEP_PIN, Y_STEP_PIN, Z_STEP_PIN, E_STEP_PIN};
unsigned long axis_previous_micros[NUM_AXIS];
unsigned long previous_micros = 0, previous_millis_heater, previous_millis_bed_heater;
unsigned long x_steps_to_take, y_steps_to_take, z_steps_to_take, e_steps_to_take;
unsigned long move_steps_to_take[NUM_AXIS];
#ifdef RAMP_ACCELERATION
unsigned long axis_max_interval[] = {100000000.0 / (max_start_speed_units_per_second[0] * axis_steps_per_unit[0]),
100000000.0 / (max_start_speed_units_per_second[1] * axis_steps_per_unit[1]),
@ -89,15 +90,18 @@ unsigned long x_steps_to_take, y_steps_to_take, z_steps_to_take, e_steps_to_take
#endif
boolean acceleration_enabled = false, accelerating = false;
unsigned long interval;
float destination_x = 0.0, destination_y = 0.0, destination_z = 0.0, destination_e = 0.0;
float current_x = 0.0, current_y = 0.0, current_z = 0.0, current_e = 0.0;
float destination[NUM_AXIS] = {0.0, 0.0, 0.0, 0.0};
float current_position[NUM_AXIS] = {0.0, 0.0, 0.0, 0.0};
long axis_interval[NUM_AXIS]; // for speed delay
float feedrate = 1500, next_feedrate, z_feedrate, saved_feedrate;
float feedrate = 1500, next_feedrate, saved_feedrate;
float time_for_move;
long gcode_N, gcode_LastN;
bool relative_mode = false; //Determines Absolute or Relative Coordinates
bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode.
long timediff = 0;
//experimental feedrate calc
float d = 0;
float axis_diff[NUM_AXIS] = {0, 0, 0, 0};
#ifdef STEP_DELAY_RATIO
long long_step_delay_ratio = STEP_DELAY_RATIO * 100;
#endif
@ -442,9 +446,6 @@ inline bool code_seen(char code)
strchr_pointer = strchr(cmdbuffer[bufindr], code);
return (strchr_pointer != NULL); //Return True if a character was found
}
//experimental feedrate calc
float d = 0;
float xdiff = 0, ydiff = 0, zdiff = 0, ediff = 0;
inline void process_commands()
{
@ -457,6 +458,9 @@ inline void process_commands()
{
case 0: // G0 -> G1
case 1: // G1
#ifdef DISABLE_CHECK_DURING_ACC || DISABLE_CHECK_DURING_MOVE
manage_heater();
#endif
get_coordinates(); // For X Y Z E F
prepare_move();
previous_millis_cmd = millis();
@ -474,68 +478,64 @@ inline void process_commands()
break;
case 28: //G28 Home all Axis one at a time
saved_feedrate = feedrate;
destination_x = 0;
current_x = 0;
destination_y = 0;
current_y = 0;
destination_z = 0;
current_z = 0;
destination_e = 0;
current_e = 0;
for(int i=0; i < NUM_AXIS; i++) {
destination[i] = 0;
current_position[i] = 0;
}
feedrate = 0;
if((X_MIN_PIN > -1 && X_HOME_DIR==-1) || (X_MAX_PIN > -1 && X_HOME_DIR==1)) {
current_x = 0;
destination_x = 1.5 * X_MAX_LENGTH * X_HOME_DIR;
current_position[0] = 0;
destination[0] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;
feedrate = max_start_speed_units_per_second[0] * 60;
prepare_move();
current_x = 0;
destination_x = -1 * X_HOME_DIR;
current_position[0] = 0;
destination[0] = -1 * X_HOME_DIR;
prepare_move();
destination_x = 10 * X_HOME_DIR;
destination[0] = 10 * X_HOME_DIR;
prepare_move();
current_x = 0;
destination_x = 0;
current_position[0] = 0;
destination[0] = 0;
feedrate = 0;
}
if((Y_MIN_PIN > -1 && Y_HOME_DIR==-1) || (Y_MAX_PIN > -1 && Y_HOME_DIR==1)) {
current_y = 0;
destination_y = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR;
current_position[1] = 0;
destination[1] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR;
feedrate = max_start_speed_units_per_second[1] * 60;
prepare_move();
current_y = 0;
destination_y = -1 * Y_HOME_DIR;
current_position[1] = 0;
destination[1] = -1 * Y_HOME_DIR;
prepare_move();
destination_y = 10 * Y_HOME_DIR;
destination[1] = 10 * Y_HOME_DIR;
prepare_move();
current_y = 0;
destination_y = 0;
current_position[1] = 0;
destination[1] = 0;
feedrate = 0;
}
if((Z_MIN_PIN > -1 && Z_HOME_DIR==-1) || (Z_MAX_PIN > -1 && Z_HOME_DIR==1)) {
current_z = 0;
destination_z = 1.5 * Z_MAX_LENGTH * Z_HOME_DIR;
feedrate = max_z_feedrate/2;
current_position[2] = 0;
destination[2] = 1.5 * Z_MAX_LENGTH * Z_HOME_DIR;
feedrate = max_feedrate[2]/2;
prepare_move();
current_z = 0;
destination_z = -1 * Z_HOME_DIR;
current_position[2] = 0;
destination[2] = -1 * Z_HOME_DIR;
prepare_move();
destination_z = 10 * Z_HOME_DIR;
destination[2] = 10 * Z_HOME_DIR;
prepare_move();
current_z = 0;
destination_z = 0;
current_position[2] = 0;
destination[2] = 0;
feedrate = 0;
}
@ -549,10 +549,9 @@ inline void process_commands()
relative_mode = true;
break;
case 92: // G92
if(code_seen('X')) current_x = code_value();
if(code_seen('Y')) current_y = code_value();
if(code_seen('Z')) current_z = code_value();
if(code_seen('E')) current_e = code_value();
for(int i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) current_position[i] = code_value();
}
break;
}
@ -750,10 +749,10 @@ inline void process_commands()
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); //Floating
break;
case 82:
relative_mode_e = false;
axis_relative_modes[3] = false;
break;
case 83:
relative_mode_e = true;
axis_relative_modes[3] = true;
break;
case 84:
if(code_seen('S')){ stepper_inactive_time = code_value() * 1000; }
@ -764,10 +763,9 @@ inline void process_commands()
max_inactive_time = code_value() * 1000;
break;
case 92: // M92
if(code_seen('X')) axis_steps_per_unit[0] = code_value();
if(code_seen('Y')) axis_steps_per_unit[1] = code_value();
if(code_seen('Z')) axis_steps_per_unit[2] = code_value();
if(code_seen('E')) axis_steps_per_unit[3] = code_value();
for(int i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) axis_steps_per_unit[i] = code_value();
}
//Update start speed intervals and axis order. TODO: refactor axis_max_interval[] calculation into a function, as it
// should also be used in setup() as well
@ -784,27 +782,25 @@ inline void process_commands()
break;
case 114: // M114
Serial.print("X:");
Serial.print(current_x);
Serial.print(current_position[0]);
Serial.print("Y:");
Serial.print(current_y);
Serial.print(current_position[1]);
Serial.print("Z:");
Serial.print(current_z);
Serial.print(current_position[2]);
Serial.print("E:");
Serial.println(current_e);
Serial.println(current_position[3]);
break;
#ifdef RAMP_ACCELERATION
//TODO: update for all axis, use for loop
case 201: // M201
if(code_seen('X')) axis_steps_per_sqr_second[0] = code_value() * axis_steps_per_unit[0];
if(code_seen('Y')) axis_steps_per_sqr_second[1] = code_value() * axis_steps_per_unit[1];
if(code_seen('Z')) axis_steps_per_sqr_second[2] = code_value() * axis_steps_per_unit[2];
if(code_seen('E')) axis_steps_per_sqr_second[3] = code_value() * axis_steps_per_unit[3];
for(int i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) axis_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i];
}
break;
case 202: // M202
if(code_seen('X')) axis_travel_steps_per_sqr_second[0] = code_value() * axis_steps_per_unit[0];
if(code_seen('Y')) axis_travel_steps_per_sqr_second[1] = code_value() * axis_steps_per_unit[1];
if(code_seen('Z')) axis_travel_steps_per_sqr_second[2] = code_value() * axis_steps_per_unit[2];
if(code_seen('E')) axis_travel_steps_per_sqr_second[3] = code_value() * axis_steps_per_unit[3];
for(int i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i];
}
break;
#endif
}
@ -840,14 +836,10 @@ inline void ClearToSend()
inline void get_coordinates()
{
if(code_seen('X')) destination_x = (float)code_value() + relative_mode*current_x;
else destination_x = current_x; //Are these else lines really needed?
if(code_seen('Y')) destination_y = (float)code_value() + relative_mode*current_y;
else destination_y = current_y;
if(code_seen('Z')) destination_z = (float)code_value() + relative_mode*current_z;
else destination_z = current_z;
if(code_seen('E')) destination_e = (float)code_value() + (relative_mode_e || relative_mode)*current_e;
else destination_e = current_e;
for(int i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i];
else destination[i] = current_position[i]; //Are these else lines really needed?
}
if(code_seen('F')) {
next_feedrate = code_value();
if(next_feedrate > 0.0) feedrate = next_feedrate;
@ -857,123 +849,91 @@ inline void get_coordinates()
inline void prepare_move()
{
//Find direction
if(destination_x >= current_x) direction_x = 1;
else direction_x = 0;
if(destination_y >= current_y) direction_y = 1;
else direction_y = 0;
if(destination_z >= current_z) direction_z = 1;
else direction_z = 0;
if(destination_e >= current_e) direction_e = 1;
else direction_e = 0;
for(int i=0; i < NUM_AXIS; i++) {
if(destination[i] >= current_position[i]) move_direction[i] = 1;
else move_direction[i] = 0;
}
if (min_software_endstops) {
if (destination_x < 0) destination_x = 0.0;
if (destination_y < 0) destination_y = 0.0;
if (destination_z < 0) destination_z = 0.0;
if (destination[0] < 0) destination[0] = 0.0;
if (destination[1] < 0) destination[1] = 0.0;
if (destination[2] < 0) destination[2] = 0.0;
}
if (max_software_endstops) {
if (destination_x > X_MAX_LENGTH) destination_x = X_MAX_LENGTH;
if (destination_y > Y_MAX_LENGTH) destination_y = Y_MAX_LENGTH;
if (destination_z > Z_MAX_LENGTH) destination_z = Z_MAX_LENGTH;
if (destination[0] > X_MAX_LENGTH) destination[0] = X_MAX_LENGTH;
if (destination[1] > Y_MAX_LENGTH) destination[1] = Y_MAX_LENGTH;
if (destination[2] > Z_MAX_LENGTH) destination[2] = Z_MAX_LENGTH;
}
if(feedrate > max_feedrate) feedrate = max_feedrate;
if(feedrate > max_z_feedrate) z_feedrate = max_z_feedrate;
else z_feedrate = feedrate;
xdiff = (destination_x - current_x);
ydiff = (destination_y - current_y);
zdiff = (destination_z - current_z);
ediff = (destination_e - current_e);
x_steps_to_take = abs(xdiff) * axis_steps_per_unit[0];
y_steps_to_take = abs(ydiff) * axis_steps_per_unit[1];
z_steps_to_take = abs(zdiff) * axis_steps_per_unit[2];
e_steps_to_take = abs(ediff) * axis_steps_per_unit[3];
for(int i=0; i < NUM_AXIS; i++) {
axis_diff[i] = destination[i] - current_position[i];
move_steps_to_take[i] = abs(axis_diff[i]) * axis_steps_per_unit[i];
}
if(feedrate < 10)
feedrate = 10;
/*
//experimental feedrate calc
if(abs(xdiff) > 0.1 && abs(ydiff) > 0.1)
d = sqrt(xdiff * xdiff + ydiff * ydiff);
else if(abs(xdiff) > 0.1)
d = abs(xdiff);
else if(abs(ydiff) > 0.1)
d = abs(ydiff);
else if(abs(zdiff) > 0.05)
d = abs(zdiff);
else if(abs(ediff) > 0.1)
d = abs(ediff);
else d = 1; //extremely slow move, should be okay for moves under 0.1mm
time_for_move = (xdiff / (feedrate / 60000000) );
//time = 60000000 * dist / feedrate
//int feedz = (60000000 * zdiff) / time_for_move;
//if(feedz > maxfeed)
*/
#define X_TIME_FOR_MOVE ((float)x_steps_to_take / (axis_steps_per_unit[0]*feedrate/60000000))
#define Y_TIME_FOR_MOVE ((float)y_steps_to_take / (axis_steps_per_unit[1]*feedrate/60000000))
#define Z_TIME_FOR_MOVE ((float)z_steps_to_take / (axis_steps_per_unit[2]*z_feedrate/60000000))
#define E_TIME_FOR_MOVE ((float)e_steps_to_take / (axis_steps_per_unit[3]*feedrate/60000000))
time_for_move = max(X_TIME_FOR_MOVE, Y_TIME_FOR_MOVE);
time_for_move = max(time_for_move, Z_TIME_FOR_MOVE);
if(time_for_move <= 0) time_for_move = max(time_for_move, E_TIME_FOR_MOVE);
if(x_steps_to_take) axis_interval[0] = time_for_move / x_steps_to_take * 100;
if(y_steps_to_take) axis_interval[1] = time_for_move / y_steps_to_take * 100;
if(z_steps_to_take) axis_interval[2] = time_for_move / z_steps_to_take * 100;
if(e_steps_to_take && (x_steps_to_take + y_steps_to_take <= 0) ) axis_interval[3] = time_for_move / e_steps_to_take * 100;
#ifdef DEBUG_PREPARE_MOVE
Serial.print("destination_x: "); Serial.println(destination_x);
Serial.print("current_x: "); Serial.println(current_x);
Serial.print("x_steps_to_take: "); Serial.println(x_steps_to_take);
Serial.print("X_TIME_FOR_MVE: "); Serial.println(X_TIME_FOR_MOVE);
Serial.print("axis_interval[0]: "); Serial.println(axis_interval[0]);
Serial.println("");
Serial.print("destination_y: "); Serial.println(destination_y);
Serial.print("current_y: "); Serial.println(current_y);
Serial.print("y_steps_to_take: "); Serial.println(y_steps_to_take);
Serial.print("Y_TIME_FOR_MVE: "); Serial.println(Y_TIME_FOR_MOVE);
Serial.print("axis_interval[1]: "); Serial.println(axis_interval[1]);
Serial.println("");
Serial.print("destination_z: "); Serial.println(destination_z);
Serial.print("current_z: "); Serial.println(current_z);
Serial.print("z_steps_to_take: "); Serial.println(z_steps_to_take);
Serial.print("Z_TIME_FOR_MVE: "); Serial.println(Z_TIME_FOR_MOVE);
Serial.print("axis_interval[2]: "); Serial.println(axis_interval[2]);
Serial.println("");
Serial.print("destination_e: "); Serial.println(destination_e);
Serial.print("current_e: "); Serial.println(current_e);
Serial.print("e_steps_to_take: "); Serial.println(e_steps_to_take);
Serial.print("E_TIME_FOR_MVE: "); Serial.println(E_TIME_FOR_MOVE);
Serial.print("axis_interval[3]: "); Serial.println(axis_interval[3]);
Serial.println("");
//Feedrate calc based on XYZ travel distance
float xy_d;
if(abs(axis_diff[0]) > 0 || abs(axis_diff[1]) > 0 || abs(axis_diff[2])) {
xy_d = sqrt(axis_diff[0] * axis_diff[0] + axis_diff[1] * axis_diff[1]);
d = sqrt(xy_d * xy_d + axis_diff[2] * axis_diff[2]);
}
else if(abs(axis_diff[3]) > 0)
d = abs(axis_diff[3]);
#ifdef DEBUG_PREPARE_MOVE
else {
log_message("_PREPARE_MOVE - No steps to take!");
}
#endif
unsigned long axis_steps_to_take[NUM_AXIS] = {x_steps_to_take, y_steps_to_take, z_steps_to_take, e_steps_to_take};
linear_move(axis_steps_to_take); // make the move
time_for_move = (d / (feedrate / 60000000.0) );
//Check max feedrate for each axis is not violated, update time_for_move if necessary
for(int i = 0; i < NUM_AXIS; i++) {
if(move_steps_to_take[i] && abs(axis_diff[i]) / (time_for_move / 60000000.0) > max_feedrate[i]) {
time_for_move = time_for_move / max_feedrate[i] * (abs(axis_diff[i]) / (time_for_move / 60000000.0));
}
}
//Calculate the full speed stepper interval for each axis
for(int i=0; i < NUM_AXIS; i++) {
if(move_steps_to_take[i]) axis_interval[i] = time_for_move / move_steps_to_take[i] * 100;
}
#ifdef DEBUG_PREPARE_MOVE
log_float("_PREPARE_MOVE - Move distance on the XY plane", xy_d);
log_float("_PREPARE_MOVE - Move distance on the XYZ space", d);
log_float("_PREPARE_MOVE - Commanded feedrate", feedrate);
log_float("_PREPARE_MOVE - Constant full speed move time", time_for_move);
log_float_array("_PREPARE_MOVE - Destination", destination, NUM_AXIS);
log_float_array("_PREPARE_MOVE - Current position", current_position, NUM_AXIS);
log_ulong_array("_PREPARE_MOVE - Steps to take", move_steps_to_take, NUM_AXIS);
log_long_array("_PREPARE_MOVE - Axes full speed intervals", axis_interval, NUM_AXIS);
#endif
unsigned long move_steps[NUM_AXIS];
for(int i=0; i < NUM_AXIS; i++)
move_steps[i] = move_steps_to_take[i];
linear_move(move_steps); // make the move
}
void linear_move(unsigned long axis_steps_remaining[]) // make linear move with preset speeds and destinations, see G0 and G1
{
//Determine direction of movement
if (destination_x > current_x) digitalWrite(X_DIR_PIN,!INVERT_X_DIR);
if (destination[0] > current_position[0]) digitalWrite(X_DIR_PIN,!INVERT_X_DIR);
else digitalWrite(X_DIR_PIN,INVERT_X_DIR);
if (destination_y > current_y) digitalWrite(Y_DIR_PIN,!INVERT_Y_DIR);
if (destination[1] > current_position[1]) digitalWrite(Y_DIR_PIN,!INVERT_Y_DIR);
else digitalWrite(Y_DIR_PIN,INVERT_Y_DIR);
if (destination_z > current_z) digitalWrite(Z_DIR_PIN,!INVERT_Z_DIR);
if (destination[2] > current_position[2]) digitalWrite(Z_DIR_PIN,!INVERT_Z_DIR);
else digitalWrite(Z_DIR_PIN,INVERT_Z_DIR);
if (destination_e > current_e) digitalWrite(E_DIR_PIN,!INVERT_E_DIR);
if (destination[3] > current_position[3]) digitalWrite(E_DIR_PIN,!INVERT_E_DIR);
else digitalWrite(E_DIR_PIN,INVERT_E_DIR);
if(X_MIN_PIN > -1) if(!direction_x) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[0]=0;
if(Y_MIN_PIN > -1) if(!direction_y) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[1]=0;
if(Z_MIN_PIN > -1) if(!direction_z) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[2]=0;
if(X_MAX_PIN > -1) if(direction_x) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[0]=0;
if(Y_MAX_PIN > -1) if(direction_y) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[1]=0;
if(Z_MAX_PIN > -1) if(direction_z) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[2]=0;
if(X_MIN_PIN > -1) if(!move_direction[0]) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[0]=0;
if(Y_MIN_PIN > -1) if(!move_direction[1]) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[1]=0;
if(Z_MIN_PIN > -1) if(!move_direction[2]) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[2]=0;
if(X_MAX_PIN > -1) if(move_direction[0]) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[0]=0;
if(Y_MAX_PIN > -1) if(move_direction[1]) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[1]=0;
if(Z_MAX_PIN > -1) if(move_direction[2]) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) axis_steps_remaining[2]=0;
//Only enable axis that are moving. If the axis doesn't need to move then it can stay disabled depending on configuration.
@ -999,6 +959,8 @@ void linear_move(unsigned long axis_steps_remaining[]) // make linear move with
#ifdef DEBUG_BRESENHAM
log_int("_BRESENHAM - Primary axis", primary_axis);
log_int("_BRESENHAM - Primary axis full speed interval", interval);
log_uint_array("_BRESENHAM - Deltas", delta, NUM_AXIS);
log_int_array("_BRESENHAM - Errors", axis_error, NUM_AXIS);
#endif
//If acceleration is enabled, do some Bresenham calculations depending on which axis will lead it.
@ -1023,20 +985,17 @@ void linear_move(unsigned long axis_steps_remaining[]) // make linear move with
}
for(int i = 0; i < NUM_AXIS; i++)
if(axis_steps_remaining[i] >0) {
new_axis_max_intervals[i] = slowest_start_axis_max_interval * axis_steps_remaining[i] / axis_steps_remaining[slowest_start_axis];
new_axis_max_intervals[i] = slowest_start_axis_max_interval * axis_steps_remaining[slowest_start_axis] / axis_steps_remaining[i];
if(i == primary_axis) {
max_interval = new_axis_max_intervals[i];
min_speed_steps_per_second = 100000000 / max_interval;
}
}
#ifdef DEBUG_RAMP_ACCELERATION
log_ulong_array("_RAMP_ACCELERATION - Actual step intervals at move start", new_axis_max_intervals, NUM_AXIS);
#endif
//Calculate slowest axis plateau time
float slowest_axis_plateau_time = 0;
for(int i=0; i < NUM_AXIS ; i++) {
if(axis_steps_remaining[i] > 0) {
if(e_steps_to_take > 0 && axis_steps_remaining[i] > 0) slowest_axis_plateau_time = max(slowest_axis_plateau_time,
if(move_steps_to_take[3] > 0 && axis_steps_remaining[i] > 0) slowest_axis_plateau_time = max(slowest_axis_plateau_time,
(100000000.0 / axis_interval[i] - 100000000.0 / new_axis_max_intervals[i]) / (float) axis_steps_per_sqr_second[i]);
else if(axis_steps_remaining[i] > 0) slowest_axis_plateau_time = max(slowest_axis_plateau_time,
(100000000.0 / axis_interval[i] - 100000000.0 / new_axis_max_intervals[i]) / (float) axis_travel_steps_per_sqr_second[i]);
@ -1045,11 +1004,16 @@ void linear_move(unsigned long axis_steps_remaining[]) // make linear move with
//Now we can calculate the new primary axis acceleration, so that the slowest axis max acceleration is not violated
steps_per_sqr_second = (100000000.0 / axis_interval[primary_axis] - 100000000.0 / new_axis_max_intervals[primary_axis]) / slowest_axis_plateau_time;
plateau_steps = (long) ((steps_per_sqr_second / 2.0 * slowest_axis_plateau_time + min_speed_steps_per_second) * slowest_axis_plateau_time);
#ifdef DEBUG_RAMP_ACCELERATION
log_int("_RAMP_ACCELERATION - Start speed limiting axis", slowest_start_axis);
log_ulong("_RAMP_ACCELERATION - Limiting axis start interval", slowest_start_axis_max_interval);
log_ulong_array("_RAMP_ACCELERATION - Actual step intervals at move start", new_axis_max_intervals, NUM_AXIS);
#endif
#endif
#ifdef EXP_ACCELERATION
unsigned long virtual_full_velocity_steps;
unsigned long full_velocity_steps;
if(e_steps_to_take > 0) virtual_full_velocity_steps = axis_virtual_full_velocity_steps[primary_axis];
if(move_steps_to_take[3] > 0) virtual_full_velocity_steps = axis_virtual_full_velocity_steps[primary_axis];
else virtual_full_velocity_steps = axis_travel_virtual_full_velocity_steps[primary_axis];
full_velocity_steps = min(virtual_full_velocity_steps, (delta[primary_axis] - axis_min_constant_speed_steps[primary_axis]) / 2);
max_interval = axis_max_interval[primary_axis];
@ -1163,12 +1127,12 @@ void linear_move(unsigned long axis_steps_remaining[]) // make linear move with
//If there are x or y steps remaining, perform Bresenham algorithm
if(axis_steps_remaining[primary_axis]) {
if(X_MIN_PIN > -1) if(!direction_x) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(Y_MIN_PIN > -1) if(!direction_y) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(X_MAX_PIN > -1) if(direction_x) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) break;
if(Y_MAX_PIN > -1) if(direction_y) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) break;
if(Z_MIN_PIN > -1) if(!direction_z) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(Z_MAX_PIN > -1) if(direction_z) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) break;
if(X_MIN_PIN > -1) if(!move_direction[0]) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(Y_MIN_PIN > -1) if(!move_direction[1]) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(X_MAX_PIN > -1) if(move_direction[0]) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) break;
if(Y_MAX_PIN > -1) if(move_direction[1]) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) break;
if(Z_MIN_PIN > -1) if(!move_direction[2]) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) break;
if(Z_MAX_PIN > -1) if(move_direction[2]) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) break;
timediff = micros() * 100 - axis_previous_micros[primary_axis];
while(timediff >= interval && axis_steps_remaining[primary_axis] > 0) {
steps_done++;
@ -1201,14 +1165,10 @@ void linear_move(unsigned long axis_steps_remaining[]) // make linear move with
if(DISABLE_E) disable_e();
// Update current position partly based on direction, we probably can combine this with the direction code above...
if (destination_x > current_x) current_x = current_x + x_steps_to_take / axis_steps_per_unit[0];
else current_x = current_x - x_steps_to_take / axis_steps_per_unit[0];
if (destination_y > current_y) current_y = current_y + y_steps_to_take / axis_steps_per_unit[1];
else current_y = current_y - y_steps_to_take / axis_steps_per_unit[1];
if (destination_z > current_z) current_z = current_z + z_steps_to_take / axis_steps_per_unit[2];
else current_z = current_z - z_steps_to_take / axis_steps_per_unit[2];
if (destination_e > current_e) current_e = current_e + e_steps_to_take / axis_steps_per_unit[3];
else current_e = current_e - e_steps_to_take / axis_steps_per_unit[3];
for(int i=0; i < NUM_AXIS; i++) {
if (destination[i] > current_position[i]) current_position[i] = current_position[i] + move_steps_to_take[i] / axis_steps_per_unit[i];
else current_position[i] = current_position[i] - move_steps_to_take[i] / axis_steps_per_unit[i];
}
}
inline void do_step_update_micros(int axis) {
@ -1536,7 +1496,7 @@ if( (millis()-previous_millis_cmd) > stepper_inactive_time ) if(stepper_inactiv
#ifdef DEBUG
void log_message(char* message) {
Serial.println(message);
Serial.print("DEBUG"); Serial.println(message);
}
void log_int(char* message, int value) {

6
Tonokip_Firmware/configuration.h
View file

@ -10,7 +10,7 @@
//Min step delay in microseconds. If you are experiencing missing steps, try to raise the delay microseconds, but be aware this
// If you enable this, make sure STEP_DELAY_RATIO is disabled.
#define STEP_DELAY_MICROS 1
//#define STEP_DELAY_MICROS 1
//Step delay over interval ratio. If you are still experiencing missing steps, try to uncomment the following line, but be aware this
//If you enable this, make sure STEP_DELAY_MICROS is disabled.
@ -96,9 +96,9 @@ float min_constant_speed_units = 2; // the minimum units of an accelerated move
//Calibration variables
const int NUM_AXIS = 4; // The axis order in all axis related arrays is X, Y, Z, E
bool axis_relative_modes[] = {false, false, false, true};
float axis_steps_per_unit[] = {80.376,80.376,3200/1.25,16};
float max_feedrate = 200000; // mm/min, acceleration!
float max_z_feedrate = 180; // mm/min, acceleration!
float max_feedrate[] = {200000, 200000, 240, 500000}; //mmm, acceleration!
//float x_steps_per_unit = 10.047;
//float y_steps_per_unit = 10.047;