pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Edited Sprinter/Configuration.h via GitHub

Browse source
This commit is contained in:
lemio 2011-08-27 03:28:16 +03:00 committed by Alessandro Ranellucci
parent a638077ea8
commit 34b9fd054b
1 changed files with 3 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Sprinter/Configuration.h
View file

@ -31,10 +31,11 @@ float axis_steps_per_unit[] = {80, 80, 3200/1.25,700};
//// Endstop Settings
#define ENDSTOPPULLUPS 1 // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool ENDSTOPS_INVERTING = false; //set to true to invert the logic of the endstops
//If your axes are only moving in one direction, make sure the endstops are connected properly.
//If your axes move in one direction ONLY when the endstops are triggered, set ENDSTOPS_INVERTING to true here
cost bool X_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
cost bool Y_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
cost bool Z_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
// This determines the communication speed of the printer
#define BAUDRATE 115200