pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge pull request #65 from blddk/master

Browse source 
M42 for toggling individual pins or setting PWM, modified MINTEMP to apply to heated bed
This commit is contained in:
kliment 2011-08-03 02:46:06 -07:00
commit 6fe2dbe366
2 changed files with 33 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

30
Sprinter/Sprinter.pde
View file

@ -43,6 +43,7 @@
// M27 - Report SD print status
// M28 - Start SD write (M28 filename.g)
// M29 - Stop SD write
// M42 - Set output on free pins, on a non pwm pin (over pin 13 on an arduino mega) use S255 to turn it on and S0 to turn it off. Use P to decide the pin (M42 P23 S255) would turn pin 23 on
// M81 - Turn off Power Supply
// M82 - Set E codes absolute (default)
// M83 - Set E codes relative while in Absolute Coordinates (G90) mode
@ -724,6 +725,31 @@ inline void process_commands()
//savetosd = false;
break;
#endif
case 42: //M42 -Change pin status via gcode
if (code_seen('S'))
{
int pin_status = code_value();
if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
{
int pin_number = code_value();
for(int i = 0; i < sizeof(sensitive_pins); i++)
{
if (sensitive_pins[i] == pin_number)
{
pin_number = -1;
break;
}
}
if (pin_number > -1)
{
pinMode(pin_number, OUTPUT);
digitalWrite(pin_number, pin_status);
analogWrite(pin_number, pin_status);
}
}
}
break;
case 104: // M104
if (code_seen('S')) target_raw = temp2analogh(code_value());
#ifdef WATCHPERIOD
@ -1496,7 +1522,11 @@ void manage_heater()
#endif
#ifdef MINTEMP
if(current_bed_raw >= target_bed_raw || current_bed_raw < minttemp)
#else
if(current_bed_raw >= target_bed_raw)
#endif
{
WRITE(HEATER_1_PIN,LOW);
}

3
Sprinter/pins.h
View file

@ -495,4 +495,7 @@
#endif
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
const int sensitive_pins[] = {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN};
#endif