pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Removing MCode for overheat protection

Browse source
This commit is contained in:
Nils 2011-05-12 23:24:59 +02:00
parent 5ba9e2683c
commit 889d6a7c5b
2 changed files with 0 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Tonokip_Firmware/Tonokip_Firmware.pde
View file

@ -52,7 +52,6 @@
// M92 - Set axis_steps_per_unit - same syntax as G92
// M115 - Capabilities string
// M140 - Set bed target temp
// M143 - Set maximum hot-end temperature
// M190 - Wait for bed current temp to reach target temp.
// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000)
@ -660,9 +659,6 @@ inline void process_commands()
case 140: // M140 set bed temp
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
break;
case 143: // M143 set maximum hotend temperature
if (code_seen('S')) maxttemp = temp2analog(code_value());
break;
case 105: // M105
#if (TEMP_0_PIN>-1) || defined (HEATER_USES_MAX6675)
tt=analog2temp(current_raw);

1
Tonokip_Firmware/configuration.h
View file

@ -65,7 +65,6 @@ float min_constant_speed_units = 2; // the minimum units of an accelerated move
//When temperature exceeds max temp, your bot will halt.
//This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
//You should use MINTEMP for thermistor short/failure protection.
//Can be customized using M143
//#define MAXTEMP 275
// Select one of these only to define how the nozzle temp is read.