pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Added chain of command so hotend wont be turned off before print is done.

Browse source
This commit is contained in:
blddk 2012-07-07 19:15:48 +03:00
parent dd2b9ef537
commit 982796f9f0
1 changed files with 22 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
Sprinter/Sprinter.pde
View file

@ -1421,6 +1421,9 @@ FORCE_INLINE void process_commands()
case 42: //M42 -Change pin status via gcode
if (code_seen('S'))
{
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
int pin_status = code_value();
if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
{
@ -1444,6 +1447,9 @@ FORCE_INLINE void process_commands()
}
break;
case 104: // M104
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value());
#ifdef WATCHPERIOD
if(target_raw > current_raw)
@ -1458,6 +1464,9 @@ FORCE_INLINE void process_commands()
#endif
break;
case 140: // M140 set bed temp
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
#if TEMP_1_PIN > -1 || defined BED_USES_AD595
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
#endif
@ -1500,6 +1509,9 @@ FORCE_INLINE void process_commands()
return;
//break;
case 109: { // M109 - Wait for extruder heater to reach target.
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value());
#ifdef WATCHPERIOD
if(target_raw>current_raw)
@ -1550,6 +1562,9 @@ FORCE_INLINE void process_commands()
}
break;
case 190: // M190 - Wait for bed heater to reach target temperature.
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
#if TEMP_1_PIN > -1
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
codenum = millis();
@ -1573,6 +1588,9 @@ FORCE_INLINE void process_commands()
break;
#if FAN_PIN > -1
case 106: //M106 Fan On
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
if (code_seen('S'))
{
unsigned char l_fan_code_val = constrain(code_value(),0,255);
@ -1627,6 +1645,9 @@ FORCE_INLINE void process_commands()
SET_OUTPUT(PS_ON_PIN); //GND
break;
case 81: // M81 - ATX Power Off
#ifdef CHAIN_OF_COMMAND
st_synchronize(); // wait for all movements to finish
#endif
SET_INPUT(PS_ON_PIN); //Floating
break;
#endif