pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fixed SD card removal and reinsertion. Added support for bed temp reading in newer repsnapper.

Browse source
This commit is contained in:
kliment 2011-04-05 13:45:46 +02:00
parent 698e33c12d
commit a71a1ee2ab
1 changed files with 23 additions and 40 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

63
Tonokip_Firmware/Tonokip_Firmware.pde
View file

@ -81,7 +81,8 @@ int target_raw = 0;
int current_raw;
int target_bed_raw = 0;
int current_bed_raw;
float tt=0,bt=0;
//Inactivity shutdown variables
unsigned long previous_millis_cmd=0;
unsigned long max_inactive_time = 0;
@ -99,7 +100,8 @@ int16_t n;
void initsd(){
sdactive=false;
if(root.isOpen())
root.close();
if (!card.init(SPI_FULL_SPEED)){
if (!card.init(SPI_HALF_SPEED))
Serial.println("SD init fail");
@ -120,11 +122,6 @@ void setup()
Serial.begin(BAUDRATE);
Serial.println("start");
//cmdbuffer[0]="\0";
//cmdbuffer[1]="\0";
//cmdbuffer[2]=char[4];
//cmdbuffer[3]=char[4];
for(int i=0;i<BUFSIZE;i++){
fromsd[i]=false;
}
@ -165,6 +162,10 @@ void setup()
#ifdef SDSUPPORT
//power to SD reader
pinMode(48,OUTPUT);
digitalWrite(48,HIGH);
initsd();
#endif
@ -180,18 +181,10 @@ void loop()
get_command();
if(buflen){
//Serial.print("buflen: ");
//Serial.print(buflen);
//Serial.print(", bufindr: ");
//Serial.print(bufindr);
//Serial.print(", bufindw: ");
//Serial.println(bufindw);
process_commands();
buflen=(buflen-1);
bufindr=(bufindr+1)%BUFSIZE;
//Serial.println("ok");
}
manage_heater();
@ -209,7 +202,6 @@ inline void get_command()
{
if(!serial_count) return; //if empty line
cmdbuffer[bufindw][serial_count] = 0; //terminate string
//Serial.println(cmdbuffer[bufindw]);
if(!comment_mode){
fromsd[bufindw]=false;
if(strstr(cmdbuffer[bufindw], "N") != NULL)
@ -276,18 +268,8 @@ inline void get_command()
}
}
// else if(strstr(cmdbuffer[bufindw], "M105") != NULL){
// Serial.println("ok");
// }
bufindw=(bufindw+1)%BUFSIZE;
buflen+=1;
//Serial.print("Received: ");
//Serial.println(gcode_LastN);
//Serial.print("Buflen: ");
//Serial.println(buflen);
}
comment_mode = false; //for new command
@ -315,14 +297,9 @@ if(!sdmode || serial_count!=0){
}
if(!serial_count) return; //if empty line
cmdbuffer[bufindw][serial_count] = 0; //terminate string
//Serial.println(cmdbuffer[bufindw]);
if(!comment_mode){
fromsd[bufindw]=true;
buflen+=1;
//Serial.print("Received: ");
// Serial.println(cmdbuffer[bufindw]);
// Serial.print("Buflen: ");
//Serial.println(buflen);
bufindw=(bufindw+1)%BUFSIZE;
}
comment_mode = false; //for new command
@ -491,12 +468,7 @@ inline void process_commands()
Serial.println(file.fileSize());
sdpos=0;
filesize=file.fileSize();
//int i=0;
//while ((n = file.read(buf, sizeof(buf))) > 0) {
// for (uint8_t i = 0; i < n; i++) Serial.print(buf[i]);
//}
Serial.println("File selected");
//file.close();
}
else{
Serial.println("file.open failed");
@ -537,11 +509,16 @@ inline void process_commands()
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
break;
case 105: // M105
tt=analog2temp(analogRead(TEMP_0_PIN));
bt=analog2tempBed(analogRead(TEMP_1_PIN));
Serial.print("T:");
Serial.println( analog2temp(analogRead(TEMP_0_PIN)) );
Serial.print("Bed:");
Serial.println( analog2tempBed(analogRead(TEMP_1_PIN)) );
break;
Serial.println(tt);
Serial.print("ok T:");
Serial.print(tt);
Serial.print(" B:");
Serial.println(bt);
return;
//break;
case 109: // M109 - Wait for heater to reach target.
if (code_seen('S')) target_raw = temp2analog(code_value());
previous_millis_heater = millis();
@ -686,6 +663,9 @@ void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remainin
if(X_MIN_PIN > -1) if(!direction_x) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) x_steps_remaining=0;
if(Y_MIN_PIN > -1) if(!direction_y) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) y_steps_remaining=0;
if(Z_MIN_PIN > -1) if(!direction_z) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) z_steps_remaining=0;
if(X_MAX_PIN > -1) if(direction_x) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) x_steps_remaining=0;
if(Y_MAX_PIN > -1) if(direction_y) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) y_steps_remaining=0;
if(Z_MAX_PIN > -1) if(direction_z) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) z_steps_remaining=0;
previous_millis_heater = millis();
@ -807,6 +787,8 @@ void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remainin
if(x_steps_remaining || y_steps_remaining) {
if(X_MIN_PIN > -1) if(!direction_x) if(digitalRead(X_MIN_PIN) != ENDSTOPS_INVERTING) x_steps_remaining=0;
if(Y_MIN_PIN > -1) if(!direction_y) if(digitalRead(Y_MIN_PIN) != ENDSTOPS_INVERTING) y_steps_remaining=0;
if(X_MAX_PIN > -1) if(direction_x) if(digitalRead(X_MAX_PIN) != ENDSTOPS_INVERTING) x_steps_remaining=0;
if(Y_MAX_PIN > -1) if(direction_y) if(digitalRead(Y_MAX_PIN) != ENDSTOPS_INVERTING) y_steps_remaining=0;
if(steep_y) {
timediff = micros() - previous_micros_y;
while(timediff >= interval) {
@ -866,6 +848,7 @@ void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remainin
if(z_steps_remaining) {
if(Z_MIN_PIN > -1) if(!direction_z) if(digitalRead(Z_MIN_PIN) != ENDSTOPS_INVERTING) z_steps_remaining=0;
if(Z_MAX_PIN > -1) if(direction_z) if(digitalRead(Z_MAX_PIN) != ENDSTOPS_INVERTING) z_steps_remaining=0;
timediff=micros()-previous_micros_z;
while(timediff >= z_interval && z_steps_remaining) { do_z_step(); z_steps_remaining--; timediff-=z_interval;}
}