pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Browse source
This commit is contained in:
johnnyr 2010-08-11 20:50:51 -07:00
parent 93770c54ed
commit dfbb1e3cb6
1 changed files with 17 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
Tonokip_Firmware/configuration.h
View file

@ -1,9 +1,10 @@
#ifndef PARAMETERS_H
#define PARAMETERS_H
// NO RS485/EXTRUDER CONTROLLER SUPPORT
// PLEASE VERIFY PIN ASSIGNMENTS FOR YOUR CONFIGURATION!!!!!!!
#define MOTHERBOARD 4 // ATMEGA168 0, SANGUINO 1, MOTHERBOARD = 2, MEGA 3, ATMEGA328 4
#define MOTHERBOARD 3 // ATMEGA168 0, SANGUINO 1, MOTHERBOARD = 2, MEGA 3, ATMEGA328 4
// THERMOCOUPLE SUPPORT UNTESTED... USE WITH CAUTION!!!!
const bool USE_THERMISTOR = true; //Set to false if using thermocouple
@ -14,12 +15,18 @@ const bool USE_THERMISTOR = true; //Set to false if using thermocouple
// units are in millimeters or whatever length unit you prefer: inches,football-fields,parsecs etc
//Calibration variables
float x_steps_per_unit = 10.047;
float y_steps_per_unit = 10.047;
float z_steps_per_unit = 833.398;
float e_steps_per_unit = 0.706;
float x_steps_per_unit = 80.376;
float y_steps_per_unit = 80.376;
float z_steps_per_unit = 6667.184;
float e_steps_per_unit = 16;
float max_feedrate = 3000;
//float x_steps_per_unit = 10.047;
//float y_steps_per_unit = 10.047;
//float z_steps_per_unit = 833.398;
//float e_steps_per_unit = 0.706;
//float max_feedrate = 3000;
//For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
const bool X_ENABLE_ON = 0;
const bool Y_ENABLE_ON = 0;
@ -34,8 +41,8 @@ const bool DISABLE_E = false;
const bool INVERT_X_DIR = false;
const bool INVERT_Y_DIR = false;
const bool INVERT_Z_DIR = false;
const bool INVERT_E_DIR = false;
const bool INVERT_Z_DIR = true;
const bool INVERT_E_DIR = true;
//Endstop Settings
const bool ENDSTOPS_INVERTING = true;
@ -43,8 +50,8 @@ const bool min_software_endstops = false; //If true, axis won't move to coordina
const bool max_software_endstops = true; //If true, axis won't move to coordinates greater than the defined lengths below.
const int X_MAX_LENGTH = 200;
const int Y_MAX_LENGTH = 200;
const int Z_MAX_LENGTH = 120;
const int Z_MAX_LENGTH = 70;
#define BAUDRATE 19200
#define BAUDRATE 115200
#endif
#endif