pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge pull request #4 from metzench/patch-1

Browse source 
Update pins.h for gen7
This commit is contained in:
midopple 2012-03-13 06:14:57 -07:00
commit e48ba6ead7
1 changed files with 11 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
Sprinter/pins.h
View file

@ -686,7 +686,11 @@
/****************************************************************************************
* Gen7 pin assignment
*
****************************************************************************************/
****************************************************************************************
* for Gen7 to work properly, you should reset your fuses to lfuse= 0xF7 ; hfuse = 0xD4 ; efuse = FD;
* else you will always get a "brown out reset" loop resetting the firmware
* you need a programmer to set the fuses
**/
#if MOTHERBOARD == 71 //GEN7 with 20 Mhz
#define MOTHERBOARD 7
#define QUARZ_20MHZ
@ -702,28 +706,28 @@
//x axis pins
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN -1
#define X_ENABLE_PIN 24
#define X_MIN_PIN 7
#define X_MAX_PIN 6
#define X_MAX_PIN -1
//y axis pins
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN -1
#define Y_ENABLE_PIN 24
#define Y_MIN_PIN 5
#define Y_MAX_PIN 2
#define Y_MAX_PIN -1
//z axis pins
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
#define Z_MAX_PIN -1
//extruder pins
#define E_STEP_PIN 28
#define E_DIR_PIN 27
#define E_ENABLE_PIN -1
#define E_ENABLE_PIN 24
#define TEMP_0_PIN 1 // Extruder
#define HEATER_0_PIN 4 // Extruder
#define HEATER_1_PIN 3 // Bed