diff --git a/photobooth_wii.py b/photobooth_wii.py
deleted file mode 100644
index 676e482..0000000
--- a/photobooth_wii.py
+++ /dev/null
@@ -1,82 +0,0 @@
-#Written by Mari DeGrazia 
-#arizona4n6@gmail.com
-#This script will synch with the Wii remote and monitor the buttons
-#Once a button is pressed, it will write out to a specified GPIO pin
-#The photobooth script monitors the corresponding GPIO pins and once the GPIO state changes acts accordingly
-
-import cwiid
-import time
-import pygame
-import RPi.GPIO as GPIO
-
-#these will be the GPIO pins that the photobooth will monitor for changes
-GPIO.setmode(GPIO.BCM)
-
-GPIO.setup(17, GPIO.OUT) #right, next overlay
-GPIO.setup(9, GPIO.OUT) #1 button, print picture
-GPIO.setup(21, GPIO.OUT) #left, previous overlay
-GPIO.setup(20, GPIO.OUT) #2 button, new picture
-GPIO.setup(16, GPIO.OUT) #A button, remove overlays
-pygame.mixer.init()
-
-pygame.mixer.music.load("/home/pi/Pi-Photobooth/audio/mk64_luigi03.wav")
-pygame.mixer.music.play()
-
-print 'Press button 1 + 2 on your Wii Remote...'
-time.sleep(1)
-
-wm = None
-while not wm:
-	try:
-		wm=cwiid.Wiimote()
-	except:
-		print "Still looking for Wii remote..."
-		pass
-
-print 'Wii Remote connected...'
-pygame.mixer.music.load("/home/pi/Pi-Photobooth/audio/mk64_mario09.wav")
-pygame.mixer.music.play()
-wm.rumble=True
-time.sleep(1)
-wm.rumble= False
-
-Rumble = False
-wm.rpt_mode = cwiid.RPT_BTN
-
-while True:
-	print  wm.state['buttons']
-	direction = wm.state['buttons']
-	
-	# 1 button pressed
-	if direction == 1:
-		print "picture"
-		GPIO.output(9, GPIO.LOW)
-		time.sleep(.3)
-		GPIO.output(9, GPIO.HIGH)
-
-	# 2 button 
-	if direction == 2:
-		print "new picture"
-		GPIO.output(20, GPIO.LOW)
-		time.sleep(.3)
-		GPIO.output(20, GPIO.HIGH)
-
-    # A button 
-	if direction == 8:
-		print "remove overlays"
-		GPIO.output(16, GPIO.LOW)
-		time.sleep(.3)
-		GPIO.output(16, GPIO.HIGH)
-		
-	#to make it turn, make one wheel move slower then the other	
-	if direction == 1024:
-		print "next overlay"
-		GPIO.output(17, GPIO.LOW)
-		time.sleep(.3)
-		GPIO.output(17, GPIO.HIGH)
-
-	if direction == 2048:
-		print "previous overlay"
-		GPIO.output(21, GPIO.LOW)
-		time.sleep(.3)
-		GPIO.output(21, GPIO.HIGH)
\ No newline at end of file