If there's a query already present, just append the timestamp to it with a & in between instead of creating a new query.
(cherry picked from commit 51c77be)
Adds a new config key printerParameters.defaultExtrusionLength which can be configured via the settings dialog in the Printer section and then gets used to set the placeholder value on the extrusion/retraction control and as fallback if the user entered no value when clicking the Extrude/Retract button.
Closes#513
Most notably the interfering options tracked in #398, but also made "Center viewport on model" and "Zoom in on model" automatically deselect and de-apply if viewport gets manipulated by user, therefore properly allowing the re-select by the user to work to.
Closes#398
This is just a hack really, the proper approach would be to finally move to a real responsive design, but this should prove as a valid workaround until that is realized.
Closes#257 for now.
Negative durations, especially for print time left, might arise if estimation is estimating less than current print time. So we just erase that margin of error in the UI.
Closes#435
- Refactored drawGrid into two functions drawRectangularGrid and drawCircularGrid
- Made sure grid for circular beds always "starts" at (0,0) so that e.g. for a radius of 105mm the center of the bed will be on the grid lines
- Made center on circular bed be better visible by making origin lines thicker
- Made initial focus on bed center properly
You can now define an amount of seconds that should be added to the rendered timelapse (so, since the current fps setting is 25 frames per seconds, 25 * the configured amount of post roll seconds images will need to be captured).
Timed timelapses add this to the actual run time of the timelapse capturing process (so if you configure 1s post roll, a timed timelapse will run 25s longer than the print)
Z-triggered timelapses just create one last capture from the webcam and use this image again and again (so 25 times for a post roll of 1s).
Implements #384
Will now be left unset if not detected (instead of dying a horrible death), modified frontend to not display bed settings in such cases. While at it also (hopefully) fixed "Target: off" for bed issue.
TODO: Support repetier's "TargetBed:", "TargetExtr%n" syntax
Fixes#399, partially solves #360
Changed the bed dimension PR slightly to use a computed property instead of two separate values and only a computed reader, added options for extruder offsets.
Corrected indentation, removed jumpy cursor, fixed off-by-one errors on history limits, limited history to a maximum of 300 entries ("300 items of command history should really be enough for anybody!")
