pingu_98/MrDraw
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
2420 commits 20 branches 22 tags 141 MiB
Commit graph

2420 commits

This branch
This branch
All branches
Author SHA1 Message Date
Gina Häußge
f19d0f0360 Base cut off point for temperature graph on timestamps instead of data points 
Cut off of the temperature graph is now not based on the number of data points any more but on the actual time of the data points. Anything older than ``n`` minutes will be cut off, with ``n`` defaulting to 30min. This value can be changed under "Temperatures" in the Settings

Closes #343
 2015-05-05 18:18:55 +02:00
Gina Häußge
ede2e8c593 Virtual printer now allows sending of custom action commands 
Sending "!!DEBUG:action_custom foo 1 2 3" will result in the virtual printer sending "// action:foo 1 2 3" back. Sending "!!DEBUG:action_custom bar" will result in the virtual printer sending "// action:bar" back.
 2015-05-05 17:30:35 +02:00
Gina Häußge
2ef3930fc3 Better extruder/nozzle offset editing in the printer profiles 
If only one tool is configured, the profile dialog now won't show the offset configuration. If more than one extruder is configured offset configuration for anything but the first tool (which acts as reference for the relative offsets of the others) will be shown.

Closes #677
 2015-05-05 10:28:21 +02:00
Gina Häußge
2d14625fd0 Added a missing changelog entry 2015-05-04 18:15:47 +02:00
Gina Häußge
92445a8a3f Virtual printer now supports two resend variants 2015-05-04 18:15:46 +02:00
Gina Häußge
517a32f08f Less strict error parsing for detecting communication errors 
Instead of matching to full strings send by firmware in case of checksum or line number issues, now matches only against lower case "checksum", "line number" and "line expected". Should make it more resilient to firmware side changes of the sent messages.
 2015-05-04 18:15:46 +02:00
Gina Häußge
72cadba854 Merge pull request #870 from DanLipsitt/feature/flask-0.10 
flask 0.10 fixes
 2015-05-04 11:36:14 +02:00
Gina Häußge
0ef66c74b0 Fix: Corectly send origin center for circular volumes 
Also added more logging in case of invalid profile detection.
 2015-05-04 11:27:25 +02:00
Gina Häußge
a1ae185272 Fans => Fan 2015-05-04 10:38:24 +02:00
Gina Häußge
fcdb556f3b Made autodetection more robust and fixed it not running if a preset for a baudrate existed 
Thanks @Salandora
 2015-04-30 17:25:52 +02:00
Gina Häußge
6e1e869851 Renamed parameter for default display for output custom control: defaultValue => default 2015-04-30 14:03:52 +02:00
Gina Häußge
ba1bab4ee7 Virtual printer now allows simulating more communication problems 
Added new debug commands:
  * !!DEBUG:dont_answer will cause the next command to go unanswered
  * !!DEBUG:trigger_resend will trigger a resend request
 2015-04-30 14:02:57 +02:00
Gina Häußge
a6a3a1365f Merge branch 'experiment/issueYellowGTO' into devel 2015-04-29 18:16:42 +02:00
Gina Häußge
34f1aa421f [doc] Added *args, **kwargs to all hooks and documented adjusted gcode hook signature 
(cherry picked from commit 30d79f4)
 2015-04-29 17:32:38 +02:00
Gina Häußge
30d79f48de [doc] Added *args, **kwargs to all hooks and documented adjusted gcode hook signature 2015-04-29 17:31:01 +02:00
Gina Häußge
ad17e22201 Force M105 upon communication timeout, see if that changes behaviour 2015-04-28 22:21:01 +02:00
Gina Häußge
9f0128cf3f Merge pull request #876 from markwal/viewmodeldoc 
Add a short explanation of additional available callbacks
 2015-04-28 18:33:20 +02:00
Gina Häußge
3aa882ee21 Fix: Also process temperature responses that only contain bed temperatures 2015-04-28 16:31:10 +02:00
Mark Walker
894aa9bc5e Add a short explanation of additional available callbacks 2015-04-28 04:24:59 -07:00
Gina Häußge
4944c33228 Made something way to complicated when it can be achieved oh so much easier. 
Thanks @Salandora
 2015-04-28 12:21:14 +02:00
Gina Häußge
06518b5374 Some changes to increase readability and reuse and remove redundancy 2015-04-28 12:16:54 +02:00
Marc
2a5a0282cb Updated the Check routine and put it into a temp. fcuntion for better readability 2015-04-27 20:55:06 +02:00
Marc
d4a96c53c3 Merge branch 'devel' of github.com:foosel/OctoPrint into fixControl 2015-04-27 19:39:37 +02:00
Gina Häußge
5e54f3a523 Persist package name for plugins loaded from entry point 
This allows later deinstallation even if module and package name differ.
 2015-04-27 18:43:00 +02:00
Gina Häußge
e96dcadc70 Fix: Receiving a "start" from the firmware triggers another handshake attempt 
Fixes #869
 2015-04-27 18:42:05 +02:00
Gina Häußge
fb5aaffdc1 Added a "fake ack" button to terminal tab, as counter measure for lost "ok"s 
In case an ok gets lost on the line, this allows to have the communication between
OctoPrint and the printer take up again.
 2015-04-27 18:13:39 +02:00
Gina Häußge
4ea6bcd1de Smoothie compat fix: Only wait for ok's after GCODE commands 
Any unknown commands should just be piped through and not use up an acknowledgement. This
new behaviour can be overridden via the new feature flag "unknownCommandsNeedAck", which will
restore the former behaviour causing even unknown commands to use up an "ok".

Also no line numbering or checksumming will happen. Shouldn't usually be of relevance for other
firmwares, but in case of any compatibility issues introduced by this also added a new feature
flag "sendChecksumWithNonGcode" that causes even unknown commands to be sent with a
checksum if necessary.
 2015-04-27 17:24:34 +02:00
Gina Häußge
5765180462 Fix: moved line number incrementing to send loop 
Should fix issues where too fast a temperature polling could cause skipped line numbers, triggering nasty resend loops in the process.
 2015-04-27 17:15:57 +02:00
Gina Häußge
4c1ba0fd0b [doc] <pluginname> => <plugin identifier> 2015-04-27 16:10:23 +02:00
Marc
159eb4ce59 Fix 2015-04-24 15:39:31 +02:00
Marc
17889a2b46 Slider DefaultValue always an Int and in range(min, max) 2015-04-24 14:46:41 +02:00
Gina Häußge
3ebc6f0f1d Fix: Reselect current printer profile if it was updated and deny deleting the current printer profile 2015-04-24 12:05:38 +02:00
Gina Häußge
9ee9f7bffb Workaround for idle temperature polling not working with Repetier Firmware 
Repetier always first sends the ok and then any command output. In case of M105, that makes the response look like from an externally triggered heatup (no ok on the same line), causing polling to stop until that falsely detected heatup is complete. Added a configuration option to disable heatup detection. The disadvantage of this is that when printing via Repetier Firmware from SD, the heatup times won't be substractable from the total print time, leading to a less accurate print time left estimation.

 Closes #835
 2015-04-24 09:36:43 +02:00
Dan Lipsitt
013d221398 BadRequest is actually in werkzeug.exceptions. 2015-04-23 13:17:39 -07:00
Dan Lipsitt
5a1b618ce0 Allow flask 0.10 in setup.py. 2015-04-23 13:17:39 -07:00
Gina Häußge
c6fdab554b [doc] documented viewmodels and their callbacks and dependency injection for usage in plugins 2015-04-23 17:27:25 +02:00
Gina Häußge
c6a0ef2425 [doc] documented gcode scripts and snippets 2015-04-23 14:05:10 +02:00
Gina Häußge
a146cb193b [docs] Updated and sorted sections in docs of control.yaml, added reference to plugin repository 2015-04-23 12:22:21 +02:00
Gina Häußge
a55de71233 Merge branch 'pr/Salandora/patch3' into devel 2015-04-23 10:41:34 +02:00
Gina Häußge
2c50861c44 Removed unnecessary a tag in custom section headers, we can just use the h1 to toggle 2015-04-23 10:41:22 +02:00
Gina Häußge
d0e7cd46ce Removed id attribute again since we don't need it anymore 2015-04-23 10:27:15 +02:00
Gina Häußge
e0027c3cba Made baudrate detection a bit more solid 2015-04-23 10:07:05 +02:00
Gina Häußge
19918b7221 Suggestion for custom controls to allow for collapsable sections while keeping close to the same visual appearance 2015-04-22 19:27:44 +02:00
Marc
7c4c8485b4 Fixed Layout 2015-04-22 18:05:49 +02:00
Gina Häußge
88af79509f Delect selected files upon comm disconnect in the printer handler 
Should solve #861
 2015-04-22 11:42:41 +02:00
Gina Häußge
a42c5edaa3 Merge pull request #865 from DanLipsitt/feature/flask-0.10 
Use BadRequest instead of JSONBadRequest.
 2015-04-22 11:16:27 +02:00
Marc
ef9034e380 Fixed linendings and encoding 2015-04-22 10:20:15 +02:00
Marc
f24ae37bd8 Missing ; added 2015-04-22 10:01:09 +02:00
Marc
3f1cbb20d3 renamed deflt and default to defaultValue 
+ adds a div container around the each Input
 2015-04-22 10:00:58 +02:00
Marc
483e19adb6 exc.stack -> (exc.stack || exc) so if exc is a message (e.g. knockout sends a message) you'll get the message instead of undefined 2015-04-22 10:00:45 +02:00