pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fixed configuration for new [XYZ]_ENDSTOP_INVERT options

Browse source
This commit is contained in:
Alessandro Ranellucci 2011-08-26 19:40:37 +02:00
parent 34b9fd054b
commit 492682f06a
1 changed files with 5 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
Sprinter/Configuration.h
View file

@ -32,10 +32,11 @@ float axis_steps_per_unit[] = {80, 80, 3200/1.25,700};
#define ENDSTOPPULLUPS 1 // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
//If your axes are only moving in one direction, make sure the endstops are connected properly.
//If your axes move in one direction ONLY when the endstops are triggered, set ENDSTOPS_INVERTING to true here
cost bool X_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
cost bool Y_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
cost bool Z_ENDSTOP_INVERT = false;//set to true to invert the logic of the endstops
//If your axes move in one direction ONLY when the endstops are triggered, set [XYZ]_ENDSTOP_INVERT to true here:
const bool X_ENDSTOP_INVERT = false;
const bool Y_ENDSTOP_INVERT = false;
const bool Z_ENDSTOP_INVERT = false;
// This determines the communication speed of the printer
#define BAUDRATE 115200