pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
538 commits 6 branches 0 tags 769 KiB
Commit graph

538 commits

This branch
This branch
All branches
Author SHA1 Message Date
midopple
aab62de29c Merge pull request #176 from blddk/experimental 
Error with DELAY_ENABLE
Thanks to blddk
 2012-05-28 05:30:43 -07:00
kliment
9af0980080 Merge pull request #174 from changwoo/experimental-arduino-1.0-compatibility 
Experimental arduino 1.0 compatibility
 2012-05-27 08:13:02 -07:00
blddk
9c708af22e Added variables for extruder fan 2012-05-24 21:15:00 +03:00
blddk
b76a110336 Added function to turn a fan on and off to keep heat from the hotend to rise up into the extruder. 2012-05-24 21:13:49 +03:00
blddk
344235701b Too many if('s 2012-05-24 21:07:35 +03:00
Changwoo Ryu
a295b6147e Arduino 1.0 build 2012-05-21 02:11:00 +09:00
midopple
c17bbb3296 Merge pull request #171 from kliment/master 
additional dropsegments test
 2012-05-17 10:39:20 -07:00
midopple
18ad4ffc0e If a small move is drop and the next move is retract the speed is wrong calculated 
see https://github.com/kliment/Sprinter/issues/170
thanks to jschleic
 2012-05-16 21:53:16 +03:00
midopple
af7ebae0f8 Add MOTHERBOARD 51 for GEN6 with Heatbed and Heatbedsensor 2012-05-15 12:36:25 +02:00
midopple
d2ccafcb77 Version 1.3.17T 
- M303 - PID relay autotune possible
- G4 Wait until last move is done
 2012-05-04 09:40:45 +02:00
midopple
5a60fcd6f5 Merge pull request #168 from kliment/master 
Bug: turn on SD_FAST_XFER_AKTIV and compilation fails if PID is
 2012-05-01 23:01:05 -07:00
kliment
d651a6cb90 Merge pull request #167 from OhmEye/master 
Fix compile error if SD_FAST_XFER_AKTIV is on and PID is off
 2012-05-01 03:50:02 -07:00
OhmEye
976c90b315 Bug: turn on SD_FAST_XFER_AKTIV and compilation fails if PID is 
enabled.

Fix:
If SD_FAST_XFER_AKTIV is defined, fast_xfer() only declares
g_heater_pwm_val if PIDTEMP is defined, but later assigns
g_heater_pwm_val=0 regardless whether PIDTEMP is defined or not. If
PIDTEMP is undefined, g_heater_pwm_val is undeclared at compile time and
generates the appropriate error. I solved by not using g_heater_pwm_val
if PIDTEMP is undefined (and therefor undeclared.)

Also, the extern declaration was as an int, when g_heater_pwm_val is
defined as a volatile unsigned char. This caused a duplicate declaration
error, which was solved by changing the declaration in fast_xfer() to
match the definition. I didn't dig deeper to try to understand if the
mismatch was intentional or test operation other than verify the compile
errors no longer occur.
 2012-04-30 23:59:53 -10:00
midopple
468dfeea60 Fix commit Text 2012-04-24 15:13:01 +02:00
midopple
4e9cf992e1 Extra Retract Feedrate for Extruder 
- Use extra extruder feedrate limit for reverse moves, and also the first forward move after a reverse
 2012-04-24 13:25:54 +02:00
midopple
0e3d2ecea4 Fix typo in Parameteroutput 2012-04-24 10:46:26 +02:00
midopple
ed9fe956a7 Ignore ":" in comments. 2012-04-23 07:56:14 +02:00
midopple
3a29ee97d1 Version 1.3.15T 
- M206 - set additional homeing offset (Thank to se5a for this idea)
  (First Version is without saving to EEPROM)
- Option for minimum FAN start speed --> #define MINIMUM_FAN_START_SPEED  50  (set it to zero to deaktivate)
 2012-04-22 18:33:19 +02:00
midopple
378426c766 When endstop is hit count virtual steps, so the print lose no position when endstop is hit 2012-04-20 22:42:25 +02:00
midopple
d8b0ac3453 - Extrudmultiply with code M221 Sxxx (S100 original Extrude value) 
- use Feedratefaktor only when Extruded lenght > 0
- M106 / M107 can drive the FAN with PWM + Port check for not using Timer 1
- New Option --> FAN_SOFT_PWM, with this option the FAN PWM can use every digital I/O (PWM with 500 hz)
- Added M93 command. Sends current steps for all axis.
 2012-04-20 15:54:54 +02:00
midopple
31ccfda44b Fixed small bug in arcs when segemnts are zero 
Thanks to hurzl
 2012-04-02 10:21:54 +02:00
kliment
4eeeaed9fc Merge pull request #161 from se5a/master 
Added M93 command - sends current steps per unit for all axis
 2012-04-01 23:32:04 -07:00
se5a
91ec05a01b Added M93 command. sends current steps for all axis 2012-04-02 10:20:27 +12:00
kliment
e89142f6a2 Merge pull request #160 from kliment/master 
Command M106 / M107
 2012-03-30 01:11:32 -07:00
midopple
52f7f30408 Command M106 / M107 for control the fan can use PWM 
New function to check the used PWM pins
 2012-03-30 11:03:41 +03:00
midopple
1748e3258b Command M106 / M107 for control the fan can use PWM 
New function to check the used PWM pins
 2012-03-30 11:02:05 +03:00
midopple
b75a6ad79d Merge pull request #159 from midopple/experimental 
Fixed arc offset
 2012-03-28 06:41:33 -07:00
midopple
2579d9390d Merge from experimental, thanks to triffid_hunter 2012-03-28 15:37:26 +02:00
kliment
85f61f040f Merge pull request #158 from kliment/master 
fix compiling from makefile
 2012-03-28 06:12:21 -07:00
kliment
2379ce0df3 Merge pull request #157 from triffid/fix-order 
fix enable_endstops being used before its definition
 2012-03-28 06:10:15 -07:00
Michael Moon
f1bc263860 fix enable_endstops being used before its definition 2012-03-28 21:41:46 +11:00
midopple
13f642c637 add my name 2012-03-28 10:49:05 +03:00
midopple
13cd4cb757 add my name 2012-03-28 10:47:29 +03:00
midopple
c3324a234c Fixed arc offset 
Thanks to Erik van der Zalm
 2012-03-27 21:38:56 +02:00
midopple
0d4d5714bc Merge commit '0c36faa8034f2c21e834efcff73aa41137be31dd' into experimental 2012-03-27 21:07:59 +02:00
Kliment Yanev
0c36faa803 Set the defaults for the heart of the sun...uhm, set default board to 33 2012-03-27 20:53:02 +02:00
kliment
2d498da2c1 Merge pull request #156 from midopple/experimental 
wrong char in configuration.h
 2012-03-27 11:33:56 -07:00
midopple
ed0f1c6f8c First char '#' was unicode so linux give an compile error 2012-03-23 21:33:54 +01:00
kliment
4df80c0d6b Merge pull request #155 from midopple/experimental 
Try to merge fixes from Master into Experimental
 2012-03-19 11:45:30 -07:00
midopple
8147df6ae0 Fixes virtual endstops when using mixed physical endstop positions. 
Thanks to ticking
 2012-03-19 18:53:06 +01:00
midopple
8954e1ccb9 Merge commit pins.h from master to experimentell 
Conflicts:
Sprinter/pins.h
 2012-03-19 18:39:36 +01:00
kliment
3534d9bde3 Merge pull request #154 from midopple/experimental 
AT90USB128x / Speedtable with F_CPU / fix include
Closes #145
 2012-03-19 09:59:40 -07:00
midopple
9af1ae8589 Version 1.3.11T 
- fix for broken include in store_eeprom.cpp  --> Thanks to kmeehl (issue #145)
- Make fastio & Arduino pin numbering consistent for AT90USB128x. --> Thanks to lincomatic
- Select Speedtable with F_CPU
- Use same Values for Speedtables as Marlin
 2012-03-19 17:55:07 +01:00
midopple
e65e0d23ee fix for broken include in store_eeprom.cpp 
Thanks to kmeehl
 2012-03-19 12:22:55 +01:00
midopple
8b8f5bf474 Make fastio & Arduino pin numbering consistent for AT90USB128x. 
Thanks to lincomatic
 2012-03-19 12:20:43 +01:00
kliment
7d45ae9ecf Merge pull request #152 from lincomatic/master 
Make fastio & Teensyduino Pin Numbering consistent with each other for AT90USB128x
 2012-03-18 03:37:16 -07:00
lincomatic
bd10b8f6ee Make fastio & Arduino pin numbering consistent for AT90USB128x 2012-03-17 21:31:46 -07:00
kliment
d8e913a6b6 Merge pull request #150 from midopple/experimental 
Fix gen7 support, fix bug in ENDSTOPS_ONLY_FOR_HOMING
 2012-03-14 12:13:52 -07:00
midopple
1fee76039c ENDSTOPS_ONLY_FOR_HOMING Option ignore Endstop always --> fault is cleared 
New Version V1.3.10T
 2012-03-14 16:40:00 +01:00
midopple
97c90f7501 Add info to GEN7 Pins 2012-03-13 14:17:05 +01:00