pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
554 commits 6 branches 0 tags 769 KiB
Commit graph

554 commits

This branch
This branch
All branches
Author SHA1 Message Date
kliment
490759557f Merge pull request #188 from felipesanches/experimental 
fix a few typos and english usage
 2012-06-15 08:04:46 -07:00
Felipe Corrêa da Silva Sanches
1d4bc83291 fix a few typos and correct english usage 2012-06-15 11:56:38 -03:00
midopple
866449371b Merge pull request #186 from blddk/experimental 
Extruder cooling fan
 2012-06-14 09:53:10 -07:00
blddk
22445736c7 Forgot to pit the part in where it makes the pin an output pin... >.< 2012-06-14 19:49:17 +03:00
kliment
12de400926 Merge pull request #185 from tzikis/experimental 
Patched the pins.h file to accept more Sanguino versions
 2012-06-12 23:30:55 -07:00
Vasileios Georgitzikis
416965177a changed the pins.h file to accept more Sanguino versions 2012-06-12 23:51:05 +03:00
midopple
02eb9b9099 Version 1.3.19T 
- Set maximum acceleration. If "steps per unit" is Change the acc were not recalculatet
- Extra Parameter for Max Extruder Jerk
- New Parameter (max_e_jerk) in EEPROM
--> Default settings after update !!
 2012-06-12 18:23:14 +02:00
midopple
cbaf809d76 Merge pull request #183 from kliment/master 
Error with Command M201
 2012-06-11 05:36:20 -07:00
midopple
597310a3dc Error with Command M201, when this Command is use the same Values are written to maximum Feedrate. 2012-06-11 15:32:24 +03:00
kliment
2ac9c3e24d Merge pull request #182 from blddk/experimental 
Added M400 to synchronize the motion queue
 2012-06-07 08:12:41 -07:00
blddk
862b63b387 Added M400 2012-06-07 18:09:00 +03:00
midopple
648b25444d Merge pull request #179 from kliment/master 
Thermistor type 3, disconnecting thermistor yields temp -20, and hotend gets switched to full power
 2012-06-02 10:19:53 -07:00
midopple
e998ed8fdb Bug in heater.cpp --> Thermistor type 3, disconnecting thermistor yields temp -20, and hotend gets switched to full power 2012-06-02 19:15:26 +02:00
midopple
87cf8e280d repaired thermistortable_6 by graphcial fitting of the off-slope values. 
Thanks to bkubicek
 2012-05-30 19:40:39 +02:00
midopple
babd2a3e84 Merge pull request #177 from kliment/master 
Wrong declaration for Variable min_time_before_dir_change
 2012-05-28 05:34:19 -07:00
midopple
aab62de29c Merge pull request #176 from blddk/experimental 
Error with DELAY_ENABLE
Thanks to blddk
 2012-05-28 05:30:43 -07:00
kliment
9af0980080 Merge pull request #174 from changwoo/experimental-arduino-1.0-compatibility 
Experimental arduino 1.0 compatibility
 2012-05-27 08:13:02 -07:00
blddk
9c708af22e Added variables for extruder fan 2012-05-24 21:15:00 +03:00
blddk
b76a110336 Added function to turn a fan on and off to keep heat from the hotend to rise up into the extruder. 2012-05-24 21:13:49 +03:00
blddk
344235701b Too many if('s 2012-05-24 21:07:35 +03:00
midopple
a63ade8350 Wrong declaration for Variable min_time_before_dir_change 
should be const long
 2012-05-24 09:09:17 +03:00
Changwoo Ryu
a295b6147e Arduino 1.0 build 2012-05-21 02:11:00 +09:00
midopple
c17bbb3296 Merge pull request #171 from kliment/master 
additional dropsegments test
 2012-05-17 10:39:20 -07:00
midopple
18ad4ffc0e If a small move is drop and the next move is retract the speed is wrong calculated 
see https://github.com/kliment/Sprinter/issues/170
thanks to jschleic
 2012-05-16 21:53:16 +03:00
midopple
af7ebae0f8 Add MOTHERBOARD 51 for GEN6 with Heatbed and Heatbedsensor 2012-05-15 12:36:25 +02:00
midopple
d2ccafcb77 Version 1.3.17T 
- M303 - PID relay autotune possible
- G4 Wait until last move is done
 2012-05-04 09:40:45 +02:00
midopple
5a60fcd6f5 Merge pull request #168 from kliment/master 
Bug: turn on SD_FAST_XFER_AKTIV and compilation fails if PID is
 2012-05-01 23:01:05 -07:00
kliment
d651a6cb90 Merge pull request #167 from OhmEye/master 
Fix compile error if SD_FAST_XFER_AKTIV is on and PID is off
 2012-05-01 03:50:02 -07:00
OhmEye
976c90b315 Bug: turn on SD_FAST_XFER_AKTIV and compilation fails if PID is 
enabled.

Fix:
If SD_FAST_XFER_AKTIV is defined, fast_xfer() only declares
g_heater_pwm_val if PIDTEMP is defined, but later assigns
g_heater_pwm_val=0 regardless whether PIDTEMP is defined or not. If
PIDTEMP is undefined, g_heater_pwm_val is undeclared at compile time and
generates the appropriate error. I solved by not using g_heater_pwm_val
if PIDTEMP is undefined (and therefor undeclared.)

Also, the extern declaration was as an int, when g_heater_pwm_val is
defined as a volatile unsigned char. This caused a duplicate declaration
error, which was solved by changing the declaration in fast_xfer() to
match the definition. I didn't dig deeper to try to understand if the
mismatch was intentional or test operation other than verify the compile
errors no longer occur.
 2012-04-30 23:59:53 -10:00
midopple
468dfeea60 Fix commit Text 2012-04-24 15:13:01 +02:00
midopple
4e9cf992e1 Extra Retract Feedrate for Extruder 
- Use extra extruder feedrate limit for reverse moves, and also the first forward move after a reverse
 2012-04-24 13:25:54 +02:00
midopple
0e3d2ecea4 Fix typo in Parameteroutput 2012-04-24 10:46:26 +02:00
midopple
ed9fe956a7 Ignore ":" in comments. 2012-04-23 07:56:14 +02:00
midopple
3a29ee97d1 Version 1.3.15T 
- M206 - set additional homeing offset (Thank to se5a for this idea)
  (First Version is without saving to EEPROM)
- Option for minimum FAN start speed --> #define MINIMUM_FAN_START_SPEED  50  (set it to zero to deaktivate)
 2012-04-22 18:33:19 +02:00
midopple
378426c766 When endstop is hit count virtual steps, so the print lose no position when endstop is hit 2012-04-20 22:42:25 +02:00
midopple
d8b0ac3453 - Extrudmultiply with code M221 Sxxx (S100 original Extrude value) 
- use Feedratefaktor only when Extruded lenght > 0
- M106 / M107 can drive the FAN with PWM + Port check for not using Timer 1
- New Option --> FAN_SOFT_PWM, with this option the FAN PWM can use every digital I/O (PWM with 500 hz)
- Added M93 command. Sends current steps for all axis.
 2012-04-20 15:54:54 +02:00
midopple
31ccfda44b Fixed small bug in arcs when segemnts are zero 
Thanks to hurzl
 2012-04-02 10:21:54 +02:00
kliment
4eeeaed9fc Merge pull request #161 from se5a/master 
Added M93 command - sends current steps per unit for all axis
 2012-04-01 23:32:04 -07:00
se5a
91ec05a01b Added M93 command. sends current steps for all axis 2012-04-02 10:20:27 +12:00
kliment
e89142f6a2 Merge pull request #160 from kliment/master 
Command M106 / M107
 2012-03-30 01:11:32 -07:00
midopple
52f7f30408 Command M106 / M107 for control the fan can use PWM 
New function to check the used PWM pins
 2012-03-30 11:03:41 +03:00
midopple
1748e3258b Command M106 / M107 for control the fan can use PWM 
New function to check the used PWM pins
 2012-03-30 11:02:05 +03:00
midopple
b75a6ad79d Merge pull request #159 from midopple/experimental 
Fixed arc offset
 2012-03-28 06:41:33 -07:00
midopple
2579d9390d Merge from experimental, thanks to triffid_hunter 2012-03-28 15:37:26 +02:00
kliment
85f61f040f Merge pull request #158 from kliment/master 
fix compiling from makefile
 2012-03-28 06:12:21 -07:00
kliment
2379ce0df3 Merge pull request #157 from triffid/fix-order 
fix enable_endstops being used before its definition
 2012-03-28 06:10:15 -07:00
Michael Moon
f1bc263860 fix enable_endstops being used before its definition 2012-03-28 21:41:46 +11:00
midopple
13f642c637 add my name 2012-03-28 10:49:05 +03:00
midopple
13cd4cb757 add my name 2012-03-28 10:47:29 +03:00
midopple
c3324a234c Fixed arc offset 
Thanks to Erik van der Zalm
 2012-03-27 21:38:56 +02:00