pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
359 commits 6 branches 0 tags 769 KiB
Commit graph

137 commits

Author SHA1 Message Date
Alessandro Ranellucci
8807e95fe2 Merge remote branch 'upstream/experimental' into alarm-pin 
Conflicts:
	Sprinter/Sprinter.pde
 2011-09-17 16:22:05 +02:00
Alessandro Ranellucci
205d115002 Signal an optional ALARM_PIN when reaching MAXTEMP 
Alarm signal can be dismissed by hard-resetting the board or by sending
a M42 P23 S0 command (where 23 is the ALARM_PIN)
 2011-09-17 14:54:39 +02:00
Alessandro Ranellucci
f14bac8a91 Initialize LED pin (was stuck after hard resets) 2011-09-17 09:45:25 +02:00
unknown
614b60b038 Fix temp readings for multiple sensor types. 
Signed-off-by: Greg Frost <gregfrost1@bigpond.com>
 2011-09-11 16:36:15 +09:30
Kliment Yanev
78be8881ce Merge branch 'master' of github.com:kliment/Sprinter into experimental 2011-09-08 23:03:57 +02:00
kliment
7dd34fc5e8 Merge pull request #80 from alexrj/different-endstops 
Change ENDSTOPS_INVERTING to [XYZ]_ENDSTOP_INVERT
 2011-09-08 12:29:29 -07:00
reprapperMC
ef406a59d5 Edited Sprinter/thermistortables.h via GitHub 2011-09-08 13:02:30 -06:00
reprapperMC
1d53de4077 Edited Sprinter/Configuration.h via GitHub 2011-09-08 13:01:08 -06:00
kliment
29ed8a3eb0 Merge pull request #83 from condac/patch-1 
Fix so the FAN pin is set as output and fixed fan off case for PWM pins
 2011-09-04 02:03:51 -07:00
condac
66288464fa New and improved On and Off for FAN_PIN 2011-09-04 11:49:14 +03:00
Kliment Yanev
6318cd2496 Fix deceleration 2011-09-03 19:18:06 +02:00
Kliment Yanev
9e711e9e19 Merge branch 'master' into experimental 2011-09-03 19:00:43 +02:00
Kliment Yanev
699a41290f Fix underflow in steps per square second 2011-09-03 18:52:18 +02:00
Kliment Yanev
55606f1bdc Fix missing newline in pins.h that prevents max6675 support from working 2011-09-03 18:51:27 +02:00
condac
731907b880 Fix so the FAN works, added fan pin as output and fixed fan off case statement 2011-09-03 19:41:16 +03:00
Kliment Yanev
b882d80fea Merge branch 'experimental' of github.com:kliment/Sprinter into experimental 2011-08-31 11:56:18 +02:00
Kliment Yanev
acc6f2caf8 Merge branch 'master' of github.com:kliment/Sprinter into experimental 2011-08-31 11:55:49 +02:00
Kliment Yanev
abff90d554 Add temp2 pin define 2011-08-31 11:55:24 +02:00
Alessandro Ranellucci
736a8f3b4a Added setup_acceleration() to header file 2011-08-29 16:05:37 +02:00
Alessandro Ranellucci
2acd4af635 Refactoring acceleration math to a new setup_acceleration() function to make M92 fully working. 2011-08-29 15:07:37 +02:00
Alessandro Ranellucci
b74d1b90e3 Fixed typo in Z_ENDSTOP_INVERT patch by lemio 2011-08-26 19:43:48 +02:00
Alessandro Ranellucci
492682f06a Fixed configuration for new [XYZ]_ENDSTOP_INVERT options 2011-08-26 19:40:37 +02:00
lemio
34b9fd054b Edited Sprinter/Configuration.h via GitHub 2011-08-26 19:01:47 +02:00
lemio
a638077ea8 Added support for using different endstops () 2011-08-26 19:01:20 +02:00
Alessandro Ranellucci
c097f45d1f Removed all unnecessary config option values to avoid confusion (one might think that setting them to 0 disabled the feature, while it has to be commented instead) 2011-08-25 21:10:29 +02:00
Alessandro Ranellucci
2c2336d8ab SMOOTHING had a value (1); however turning it to 0 won't disable the feature, so that's just confusing. 2011-08-25 21:03:53 +02:00
Alessandro Ranellucci
a58e299370 Refactoring in M109 to support residency time on cooling without code duplication 2011-08-25 20:43:07 +02:00
kliment
382953c732 Merge pull request #73 from jebba/patch-1 
Add EPCOS 100k thermistor table.
 2011-08-23 11:03:28 -07:00
jebba
949eeb257a Add Epcos 100k thermistor to table. 2011-08-23 13:53:08 -06:00
jebba
6d63c2d9e9 Add EPCOS comment to configuration. 2011-08-23 13:57:23 -06:00
ParCan
288e281457 Edited Sprinter/thermistortables.h via GitHub 2011-08-19 06:24:57 +02:00
ParCan
c5014902ad Edited Sprinter/Configuration.h via GitHub 2011-08-19 06:21:01 +02:00
kliment
3372c0f029 Merge pull request #69 from changwoo/master 
ATmega1284P support
 2011-08-12 22:42:12 -07:00
Nils
edc06d3bd3 Adding falling mode to M109 to better implement GCode definition 2011-08-11 15:36:48 +02:00
rotorit
151c5f24bf first revision... had to use the fan pin to control the extruder hot end heater. meaning.. this setup will not support a bed heat control ..for now... Time will show if I can get the Tip management A/D converter to work... or.. should i get it to work at all??? 2011-08-09 20:27:03 +03:00
rotorit
34552a9432 typo 2011-08-09 11:34:18 +03:00
rotorit
486cf5a2cc Edited Sprinter/Configuration.h via GitHub 2011-08-09 11:19:05 +03:00
rotorit
d49dd1ea8c Added support for Gen3-pluss and Gen3-Monolithic Electronics 2011-08-09 00:47:44 +03:00
rotorit
3f09e6fec9 added motherboard entry for Gen3-pluss and Gen3-Monolithic Electronics 2011-08-09 00:43:26 +03:00
Changwoo Ryu
7a3bdb7028 Support Sanguino/Sanguinololu with ATmega1284P 2011-08-09 01:51:39 +09:00
kliment
6fe2dbe366 Merge pull request #65 from blddk/master 
M42 for toggling individual pins or setting PWM, modified MINTEMP to apply to heated bed
 2011-08-03 02:46:06 -07:00
blddk
02dfbc071d Fixed so commenting out MINTEMP won't break compile, however, commenting out MINTEMP will then again allow the bed to be turned on, but not off, when there are no thermistor, or thermistor is broken. 2011-08-03 12:44:28 +03:00
blddk
f131f08bb6 Added MINTEMP to work on the heated bed too, so it will also turn off when thermistor fails. 2011-08-03 01:47:56 +03:00
blddk
ef66ecf5f1 Added M42 to control non used pins example: M42 P23 S255 2011-08-02 23:50:10 +03:00
blddk
563c90f6ff Added a list of pins which will be ignored by manual change through M42 2011-08-02 23:47:30 +03:00
Kliment
96291e27a8 When you set PWM on a pin to a given value and then WRITE a 0 to it, the PWM timer does not stop. Set the PWM to 0 as well to prevent hotend meltdowns. 2011-08-02 21:47:32 +02:00
kliment
b3280f5adc Merge pull request #62 from alexrj/heater-current-limit 
Heater current limit
 2011-07-26 14:16:20 -07:00
Alessandro Ranellucci
0ca62c5596 New config option HEATER_CURRENT to limit current to the nozzle 2011-07-26 18:45:13 +02:00
Alessandro Ranellucci
53be78c949 New implementation of TEMP_RESIDENCY_TIME. We now wait for the target temp to be esablished and maintained for residency time +/- a configurable hysteresis 2011-07-26 18:17:52 +02:00
kliment
3ff008c064 Merge pull request #60 from LawrenceLeung/master 
Support TEMP_RESIDENCY_TIME.
 2011-07-25 12:30:42 -07:00