pingu_98/Sprinter
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
453 commits 6 branches 0 tags 769 KiB
Commit graph

453 commits

This branch
This branch
All branches
Author SHA1 Message Date
midopple
bb38d646d3 Standardvalue MAX Feed Rate for Z-Axis reduced to 2 mm/s some Printers had problems with 4 mm/s 2012-02-15 20:52:41 +01:00
midopple
cba31acb76 Changed check in arc_func 
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
 2012-02-14 18:55:26 +01:00
midopple
7b21a2a055 Add pin definition for the Printrboard Rev B --> Thaks to lwalkera 2012-02-06 08:45:25 +01:00
midopple
e74587a1b4 - Implement Plannercode from Marlin V1 --> big thanks to Erik 
- Stepper interrupt with Step loops
  - Stepperfrequenz 30 Khz
  - New Command
    * M202 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
    * M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2
    * M205 - advanced settings:  minimum travel speed S=while printing T=travel only,  X= maximum xy jerk, Z=maximum Z jerk
  - Remove unused Variables
  - Check Uart Puffer while circle processing (CMD: G2 / G3)
  - Fast Xfer Function --> move Text to Flash
  - Option to deaktivate ARC (G2/G3) function (save flash)
  - Removed modulo (%) operator, which uses an expensive divide
 2012-02-05 19:58:36 +01:00
midopple
0953453911 Without the PID control for Hotend the tempmonitor use the wrong variable 2012-02-02 18:49:35 +01:00
midopple
07a63e7eb1 Option to deaktivate the arc function 2012-02-02 18:48:02 +01:00
midopple
da6a2e0436 Check Uart Puffer while circle processing (CMD: G2 / G3) 2012-02-01 21:21:23 +01:00
midopple
2ffe5ec2b5 Merge commit '132f8c212e4c316559177e532df6b9a6c2205bf2' into experimental 2012-01-29 19:18:06 +01:00
kliment
132f8c212e Merge pull request #131 from midopple/SprinterV2 
Lookahead, timer-based stepping, M30 file delete
 2012-01-29 09:20:51 -08:00
midopple
cedbef50f5 Add function to check the UART buffer while arc function is working 2012-01-29 18:15:58 +01:00
midopple
16143bc2cb Update Changelog in Mainfile 2012-01-29 09:14:30 +01:00
midopple
4ea5b0d811 Change Motherboard to 3 (standardsettings) 2012-01-29 08:53:31 +01:00
midopple
89e8e18850 Merge commit 'fa63b839c6cbf261f2655e8783bf4745cc9ca513' into SprinterV2 
Conflicts:
	Sprinter/Configuration.h
	Sprinter/Sprinter.pde
 2012-01-29 08:49:05 +01:00
midopple
eb2dc852d0 Merge commit 'fa63b839c6cbf261f2655e8783bf4745cc9ca513' into SprinterV2 
Conflicts:
	Sprinter/Configuration.h
 2012-01-29 01:27:25 +01:00
midopple
ceae0a472d Change configuration.h to original settings 2012-01-29 01:01:35 +01:00
midopple
ad7503df25 Change infotext 2012-01-29 00:20:02 +01:00
midopple
76bbfb39ae New Version Sprinter V2 
- Look Vorward Funktion -
- Stepper Control with Timer 1
- SOFT PWM for Extruder heating --> Free Timer 1
- G2 / G3 Command for arc real arc
- Baudrate 250 kbaud
- M30 Command delete file on SD Card
- Text moved to flash to free RAM
- M203 Command for Temp debugging
 2012-01-29 00:18:21 +01:00
midopple
8d17b09475 Update Sprinter/Configuration.h 2012-01-28 23:55:52 +01:00
kliment
012855c6d1 Merge pull request #129 from jschleic/patch-1 
Improve Makefile to rebuild on upload
 2012-01-27 03:17:43 -08:00
Joachim Schleicher
77c3dd85ec fix indentation 
This should be a comment. Instead it is printed together with
the 'upload' target, when idented.
 2012-01-27 12:15:38 +01:00
kliment
fa63b839c6 Merge pull request #128 from blddk/experimental 
Reported wrong temperature in M190
 2012-01-22 12:53:50 -08:00
blddk
908bc5314c Reported wrong temperature while heating up 2012-01-22 21:51:56 +01:00
kliment
4f59622219 Merge pull request #127 from blddk/experimental 
Stepper enable delay and temperature table
Fix bed temp reading in M190
 2012-01-22 10:50:56 -08:00
blddk
d8b6c5f233 Changed temperature table for bed, to the one for the bed, instead of for the heater. 2012-01-22 15:43:51 +01:00
blddk
eb7a192c94 Added option to set a delay after enabling a stepper driver, default turned off to keep current behavior. 2012-01-22 15:28:46 +01:00
blddk
e7fb583df9 Added option to set a delay after enabeling stepper driver, to allow the driver to enable (time needed according to datasheet) 2012-01-22 15:27:27 +01:00
Joachim Schleicher
591b4fa6d8 correct dependencies in Makefile 
applet/$(TARGET).elf should depend on the cpp file, not on .pde
so that the cpp is rebuilt when pde changes. We drop the target
applet_files to achieve the correct behaviour.
Now 'make upload' does rebuild the hex file as well.
 2012-01-20 15:36:05 +01:00
kliment
439f339f74 Merge pull request #125 from gdahlm/experimental 
Fixes for Gen7 Support #2
 2011-12-10 12:47:22 -08:00
kliment
a352585065 Merge pull request #126 from ERoth3/patch-1 
Updated readme with a warning about Arduino V1.0 incompatibility.
 2011-12-10 12:45:33 -08:00
ERoth3
0f55d49705 Updated readme with a warning about Arduino V1.0 incompatibility. 2011-12-10 15:43:02 -05:00
Greg Dahlman
49c5c65dcf Fix ifdef with missing # in Sprinter.pde and add 644 non P to the Gen 7 board in pins.h 2011-12-06 12:30:56 -08:00
Greg Dahlman
2c00d1580f Fixing issues in pins.h and fastio.h, I created them not understanding it was using arduino pin numbers 
I also put in a note that Gen 7 only works at 16 MHZ due to timing issues with WProgram.h and wiring.h
 2011-12-05 20:34:02 -08:00
Greg Dahlman
09d5247ba2 Merge remote-tracking branch 'upstream/experimental' 
Conflicts:
	Sprinter/pins.h
 2011-12-05 20:29:31 -08:00
kliment
2550e6c566 Merge pull request #123 from FrozenFire/master 
Allow running a specifically-named file from SD on startup if found.
 2011-12-05 01:48:36 -08:00
Nathan Zadoks
f201ccb55b Added an option to make init.g on SD run on boot. 2011-12-04 13:03:20 +01:00
Kliment Yanev
b331d48101 Add gen7 to list of boards in configuration 
Allow ATmega644 (non-P version) for Gen7
 2011-11-28 16:23:52 +01:00
Kliment Yanev
9090c6a460 Merge branch 'master' into experimental 2011-11-28 16:22:00 +01:00
Kliment Yanev
67199da509 Revert "Merge pull request #121 from Traumflug/master" 
This reverts commit 11d3281a09, reversing
changes made to f8c17d3b46.
 2011-11-28 16:10:48 +01:00
kliment
11d3281a09 Merge pull request #121 from Traumflug/master 
Allow ATmega644 for Gen7
 2011-11-28 07:05:20 -08:00
Markus Hitter
3bbfe733e7 pins.h: allow an ATmega644 (without P). 2011-11-28 16:02:58 +01:00
kliment
bb28b03aa2 Merge pull request #119 from pipakin/experimental 
Block transfer
 2011-11-16 07:22:49 -08:00
Philip Kin
fa1a0e7def M30/M31 fast sd block transfer 2011-11-16 09:17:33 -06:00
Philip Kin
d196068a8c M30/M31 fast sd block transfer 2011-11-16 09:16:14 -06:00
kliment
f8c17d3b46 Merge pull request #117 from sparr/patch-1 
Mark Sanguinololu-specific steps in instructions.
 2011-11-10 01:37:43 -08:00
sparr
f0e3ab1e22 spelling correction 2011-11-10 04:31:44 -05:00
sparr
98b8a45868 note Sanguino-specific steps 2011-11-10 04:25:13 -05:00
Kliment Yanev
514eec1fee Merge branch 'master' into experimental 2011-11-10 10:14:08 +01:00
Kliment Yanev
074acbe547 Improve 200k thermistor table to better match reality 2011-11-10 10:13:12 +01:00
kliment
6b882d0368 Merge pull request #116 from cdaringe/master 
Experimental oscillation reduction
 2011-11-06 22:33:32 -08:00
Chris Dieringer
f5c05d9439 osc reduction 2011-11-06 07:57:57 -08:00