kliment
bc8f7921c9
Merge pull request #5 from sam-ward/master.
...
Updated M28, M29 codes at top of file
2011-05-02 23:34:20 -07:00
Sam Ward
6f94a2f5da
Added comments for M28, M29 to list of implemented Gcodes
2011-05-03 14:29:06 +08:00
kliment
e243330338
Fix trailing semicolon in #define
2011-05-02 23:19:36 +02:00
Emanuele Caruso
3c67e2b0e0
Merge remote branch 'origin/master'
2011-05-02 16:27:18 +02:00
kliment
eb3940fab4
Added watchdog aand minimal temp for greater safety in the case of a disconnected thermistor
2011-05-01 16:31:46 +02:00
Emanuele Caruso
3470a47a33
Added configuration value for absolute delay microseconds, default to 1. This seems to work better than STEP_DELAY_RATIO and is enabled by default
2011-05-01 05:13:04 +02:00
Emanuele Caruso
d22c0fbf36
Added configuration parameter for delaying steps, STEP_DELAY_RATIO.
...
This should be manually enabled in configuration.h if you are
experiencing missing steps. Please be aware that enabling it may
also prevent your motor from reaching the nominal speed.
2011-05-01 04:36:45 +02:00
kliment
43f1603922
Merged pull request #2 from tommycheng/master.
...
Adding support for Sanguinololu v1.0
2011-04-29 13:43:32 -07:00
Tommy Cheng
40249d192f
Adding Support for Sanguinololu
2011-04-30 02:17:22 +08:00
kliment
6adcd70cc9
Merged pull request #1 from WebSpider/master.
...
Basic M115 implementation
2011-04-28 15:43:19 -07:00
Nils
ce13b14457
Adding basic capabilities (M115) implementation
2011-04-29 00:40:37 +02:00
kliment
e164ec87e4
Fix missing { causing compile error
2011-04-28 01:35:36 +02:00
kliment
896b01ab4a
Merge branch 'master' of git@github.com:kliment/Klimentkip
2011-04-27 23:31:54 +02:00
kliment
ef8099b6dd
Added PWM control to fan pin, added smoothing code for erratic gen6 temp readings
2011-04-27 23:30:58 +02:00
Emanuele Caruso
bc6eeb7aa6
Merge remote branch 'origin/master'
2011-04-25 23:39:36 +02:00
Emanuele Caruso
00bbafb11a
Merge remote branch 'origin/master'
2011-04-25 23:39:27 +02:00
Emanuele Caruso
f59f100653
Merge remote branch 'origin/master'
2011-04-25 23:38:27 +02:00
Emanuele Caruso
3a57b65338
Added separate acceleration configuration parameter for travel moves
2011-04-25 23:37:23 +02:00
Emanuele Caruso
d432e22dc1
Added separate acceleration configuration parameter for travel moves
2011-04-25 23:35:00 +02:00
Emanuele Caruso
bdf475b6e7
Restored acceleration configuration values to the previous more conservative defaults
2011-04-24 19:28:02 +02:00
Emanuele Caruso
6becb19dc5
Merge branch 'minconstspeed'
2011-04-22 21:18:13 +02:00
Emanuele Caruso
d8d592179e
Added min constant speed units configuration value for acceleration. Disabled manage_heating while accelerating or decelerating. Updated acceleration configuration values to better default values.
2011-04-22 21:10:10 +02:00
kliment
218d454bf4
Do not include max6675 functions if they are not in use
2011-04-22 12:21:59 +02:00
kliment
f1a2e54b12
Sane defaults when thermocouple support is present
2011-04-22 12:18:12 +02:00
kliment
86e97c14fa
Fix pin definitions for MAX6675 (SS)
2011-04-22 12:14:49 +02:00
kliment
72e4ce1c2c
Gregfrost thermocouple support - still needs minor cleanup
2011-04-22 12:14:49 +02:00
Emanuele Caruso
180f20a1cd
Updated README with important WARNING. Read it if you haven't already!
2011-04-19 17:05:31 +02:00
Emanuele Caruso
163d9d0eb2
Merge remote branch 'upstream/master'
2011-04-19 17:00:40 +02:00
Emanuele Caruso
aeb9132cbf
Fixed speed bug. Before updating, read the WARNING below!
...
WARNING: This version fixes a bug that caused speeds to be lower than what
set in GCODE. So before attempting any print, you will have to check all
your axis max speed, including the extruder retract speed. Not following
this guidelines can seriously damage your printer.
2011-04-19 16:53:17 +02:00
kliment
c392305761
Initialize temp variables correctly
2011-04-19 09:22:46 +02:00
Emanuele Caruso
614d568a96
Added some rough documentation to linear_move()
2011-04-19 02:02:06 +02:00
Nils
6f712d9306
Changed error message when selecting invalid board to actually make sense
2011-04-17 02:05:41 +02:00
kliment
24b63b7644
Correct number for Gen6 in pins.h
2011-04-15 23:56:12 +02:00
kliment
00aa507248
Add support for Gen6, conditional SD and heated bed code, and mendelparts thermistor table
2011-04-15 09:02:06 +02:00
kliment
6ec0bada6c
Fix interval calculation (thanks to BenJackson)
2011-04-14 08:18:28 +02:00
kliment
853a295762
Terminate current move after endstop hit - avoids lockup
2011-04-13 11:17:56 +02:00
kliment
6df9556de0
Fix kill function to disable axes and heaters like it should.
2011-04-12 09:55:22 +02:00
kliment
95fff5367d
Fix M28 to work with checksums - thanks to jeanmarc
2011-04-11 00:02:59 +02:00
kliment
31936a2caa
Experimental PID support. Use with caution.
2011-04-10 21:58:56 +02:00
Emanuele Caruso
d8f195bd3f
Fixed acceleration bug: thank you jeanmarc for pointing that out!
2011-04-08 23:36:38 +02:00
Emanuele Caruso
8f8acb8e5b
Merge remote branch 'origin/master'
2011-04-08 07:19:19 +02:00
Emanuele Caruso
df8611817a
Merge branches 'master' and 'accfix'
2011-04-08 07:05:16 +02:00
Emanuele Caruso
70514ce33b
Improved acceleration algorithm: now you can set minimum feedrate speed
2011-04-08 07:04:51 +02:00
kliment
c0ccdd0438
Remove checksum from M28 and M23 commands
2011-04-07 10:57:26 +02:00
Emanuele Caruso
aad7c19db8
Fixed acceleration algorithm. Added deceleration. Added configuration setting for acceleration in configuration.h
2011-04-07 06:14:23 +02:00
kliment
0f095d94d8
SD write support. Safety check for step count.
2011-04-06 23:56:39 +02:00
Emanuele Caruso
25d00d4147
Performance tweak: removed timediff calculations for extruder steps if the move has X or Y steps, since it is not used in that case
2011-04-05 17:52:23 +02:00
Emanuele Caruso
2f151cff4b
Code cleaning in linear_move(), no functional enhancement
2011-04-05 16:42:33 +02:00
kliment
a71a1ee2ab
Fixed SD card removal and reinsertion. Added support for bed temp reading in newer repsnapper.
2011-04-05 13:45:46 +02:00
Emanuele Caruso
698e33c12d
Removed float calculations in the new extruder move algorithm
2011-04-05 00:48:48 +02:00
